配置VLAN与Trunk

如何配置VLAN

1.搭建如图所示环境
2.创建3条VLAN10/20/30

<Huawei>system-view
[Huawei]vlan 10
[Huawei]vlan 20
[Huawei]vlan 30
3.将图中 标示的端口加入到相应的VLAN里
4.1--2口加入VLAN10的操作步骤
[Huawei]interface Ethernet0/0/1
[Huawei-Ethernet0/0/1]port link-type access
[Huawei-Ethernet0/0/1]port default vlan 10
[Huawei]interface Ethernet0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port default vlan 10

3--5口加入VLAN20的操作步骤

[Huawei]interface Ethernet0/0/3
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port default vlan 20
[Huawei]interface Ethernet0/0/4
[Huawei-Ethernet0/0/4]port link-type access
[Huawei-Ethernet0/0/4]port default vlan 20
[Huawei]interface Ethernet0/0/5
[Huawei-Ethernet0/0/5]port link-type access
[Huawei-Ethernet0/0/5]port default vlan 20

6--7口加入VLAN30的操作步骤
[Huawei]interface Ethernet0/0/6
[Huawei-Ethernet0/0/6]port link-type access
[Huawei-Ethernet0/0/6]port default vlan 30
[Huawei]interface Ethernet0/0/7
[Huawei-Ethernet0/0/7]port link-type access
[Huawei-Ethernet0/0/7]port default vlan 30

5.配置完成后查看VLAN列表信息
[Huawei]dis vlan
The total number of vlans is : 4

U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;

VID Type Ports

1 common UT:Eth0/0/8(D) Eth0/0/9(D) Eth0/0/10(D) Eth0/0/11(D)
Eth0/0/12(D) Eth0/0/13(D) Eth0/0/14(D) Eth0/0/15(D)
Eth0/0/16(D) Eth0/0/17(D) Eth0/0/18(D) Eth0/0/19(D)
Eth0/0/20(D) Eth0/0/21(D) Eth0/0/22(D) GE0/0/1(D)
GE0/0/2(D)
10 common UT:Eth0/0/1(D) Eth0/0/2(D)
20 common UT:Eth0/0/3(D) Eth0/0/4(D) Eth0/0/5(D)
30 common UT:Eth0/0/6(D) Eth0/0/7(D)
VID Status Property MAC-LRN Statistics Description

1 enable default enable disable VLAN 0001
10 enable default enable disable VLAN 0010
20 enable default enable disable VLAN 0020
30 enable default enable disable VLAN 0030
[Huawei]dis port vlan
Port Link Type PVID Trunk VLAN List

Ethernet0/0/1 access 10 -
Ethernet0/0/2 access 10 -
Ethernet0/0/3 access 20 -
Ethernet0/0/4 access 20 -
Ethernet0/0/5 access 20 -
Ethernet0/0/6 access 30 -
Ethernet0/0/7 access 30 -
Ethernet0/0/8 hybrid 1 -
Ethernet0/0/9 hybrid 1 -
Ethernet0/0/10 hybrid 1 -
Ethernet0/0/11 hybrid 1 -
Ethernet0/0/12 hybrid 1 -
Ethernet0/0/13 hybrid 1 -
Ethernet0/0/14 hybrid 1 -
Ethernet0/0/15 hybrid 1 -
Ethernet0/0/16 hybrid 1 -
Ethernet0/0/17 hybrid 1 -
Ethernet0/0/18 hybrid 1 -
Ethernet0/0/19 hybrid 1 -
Ethernet0/0/20 hybrid 1 -
Ethernet0/0/21 hybrid 1 -
Ethernet0/0/22 hybrid 1 -
GigabitEthernet0/0/1 hybrid 1 -
GigabitEthernet0/0/2 hybrid 1 -

6参照下图实现相同VLAN的通信
7.首先将PC机设置IP地址，如图所示
8.其次配置交换机：
9.
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys //进入系统视图
[Huawei]sys sw1 //更改名字为SW1
[sw1]vlan batch 5 10 //创建vlan5 vlan10
[sw1]int e0/0/1 //进入PC机对应的端口
[sw1-Ethernet0/0/1]port link-type access //设置接口类型
[sw1-Ethernet0/0/1]port default vlan 5 // 将01口加入VLAN5

[sw1-Ethernet0/0/1]int e0/0/2 //进入PC机的接口2
[sw1-Ethernet0/0/2]port link-type access //设置接口类型
[sw1-Ethernet0/0/2]port default vlan 10 // 将02口加入VLAN10

第二台交换机：
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
[Huawei]sys sw2
[sw2]vlan batch 5 10
将1口加入VLAN5 同SW1
[sw2]int e0/0/1
[sw2-Ethernet0/0/1]port link-type access
[sw2-Ethernet0/0/1]port default vlan 5

将2口加入VLAN10 同SW1
[sw2-Ethernet0/0/1]int e0/0/2
[sw2-Ethernet0/0/2]port link-type access
[sw2-Ethernet0/0/2]port default vlan 10

10.设置2台交换机的连接：
11.
[sw1-Ethernet0/0/2]int g0/0/1
[sw1-GigabitEthernet0/0/1]port link-type trunk
[sw1-GigabitEthernet0/0/1]port trunk allow-pass vlan 5 10

[sw2-Ethernet0/0/2]int g0/0/1
[sw2-GigabitEthernet0/0/1]port link-type trunk
[sw2GigabitEthernet0/0/1]port trunk allow-pass vlan 5 10

12.交换机配置完毕，用PC机测试连通性

13.经测试。同VLAN的PC可以相通，不同VLAN的PC不能相通。

转载于:https://blog.51cto.com/14313088/2388248