OS丢失后系统会不停的刷屏 如下：

U-Boot 1.1.6 (Build time: Dec 12 2009 - 17:17:55)

 

SRX_210_HIGHMEM board revision major:0, minor:28, serial #: AAAD7891

OCTEON CN5020-SCP pass 1.1, Core clock: 400 MHz, DDR clock: 200 MHz (400 Mhz data rate)

DRAM:  1024 MB

Starting Memory POST...

Checking datalines... OK

Checking address lines... OK

Checking 512K memory for U-Boot... OK.

Running U-Boot CRC Test... OK.

Flash:  4 MB

USB:   scanning bus for devices... 3 USB Device(s) found

       scanning bus for storage devices... 1 Storage Device(s) found

Clearing DRAM........ done

BIST check passed.

Starting PCI

PCI Status: PCI 32-bit

PCI BAR 0: 0xf8000000, PCI BAR 1: Memory 0x00000000  PCI 0x00000000

Net:   octeth0

POST Passed

Press SPACE to abort autoboot in 1 seconds

 

空格键停止启动，进入下面的界面

ELF file is 32 bit

Loading .text @ 0x8f000078 (241008 bytes)

Loading .rodata @ 0x8f03ade8 (13908 bytes)

Loading .rodata.str1.4 @ 0x8f03e43c (15972 bytes)

Loading set_Xcommand_set @ 0x8f0422a0 (96 bytes)

Loading .rodata.cst4 @ 0x8f042300 (20 bytes)

Loading .data @ 0x8f043000 (5572 bytes)

Loading .data.rel.ro @ 0x8f0445c4 (120 bytes)

Loading .data.rel @ 0x8f04463c (136 bytes)

Clearing .bss @ 0x8f0446c8 (8304 bytes)

## Starting application at 0x8f000078 ...

Consoles: U-Boot console 

Found compatible API, ver. 1.6

 

FreeBSD/MIPS U-Boot bootstrap loader, Revision 1.6

(builder@ormonth.juniper.net, Sat Dec 12 15:59:41 UTC 2009)

Memory: 1024MB

[10]Booting from nand-flash slice 1

Un-Protected 1 sectors

writing to flash...

Protected 1 sectors

ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ not found

 

U-Boot Exception, Cause: 4

Failed to load kernel.

zero: 00000000  at: acedbade    v0: ffffffff    v1: 00000000

a0: 8f011dc0    a1: 8f03efa0    a2: 8f011de8    a3: 8f05e2a0

t0: 8f064998    t1: 8f064a60    t2: 8f0460e8    t3: 00000000

t4: 00000000    t5: fffffffc    t6: 800a5084    t7: 800b6598

t8: 00000080    t9: 800557ac    s0: 00000000    s1: 8f0465b8

s2: 8f0465b8    s3: 8f01b6bc    s4: 00000002    s5: 00000000

s6: 8f03efa0    s7: 00000000    k0: aaaaaaaa    k1: aaaaaaaa

gp: 800a55a0    sp: 8f011db0    s8: 00000001    ra: 8f015d0c

sr: 504000e7    mullo: 0000000e mulhi: 000000e0 badvaddr: ffffffff

cause: 40008010 pc: ffffffff

 

= > ?

?       - alias for 'help'

askenv  - get environment variables from stdin

autoscr - run script from memory

base    - print or set address offset

bdinfo  - print Board Info structure

boot    - boot default, i.e., run 'bootcmd'

bootd   - boot default, i.e., run 'bootcmd'

bootelf - Boot from an ELF p_w_picpath in memory

bootloader - upgrade u-boot

bootloader - upgrade loader

bootloader - upgrade ushell

bootloader - upgrade flash

bootloader - check u-boot

bootloader - check loader

bootm   - boot application p_w_picpath from memory

bootoct - Boot from an Octeon Executive ELF p_w_picpath in memory

bootoctelf - Boot a generic ELF p_w_picpath in memory. NOTE: This command does not support

             simple executive applications, use bootoct for those.

bootoctlinux - Boot from a linux ELF p_w_picpath in memory

bootp   - boot p_w_picpath via network using BootP/TFTP protocol

bootvx  - Boot vxWorks from an ELF p_w_picpath

cmp     - memory compare

coninfo - print console devices and information

cp      - memory copy

cpld     - peek/poke CPLD

crc32   - checksum calculation

dhcp    - invoke DHCP client to obtain IP/boot params

dumpoct      - dump octeon regs

dumpstats    - dump cavium stats

echo    - echo args to console

eeprom  - EEPROM sub-system

erase   - erase FLASH memory

fatinfo - print information about filesystem

fatload - load binary file from a dos filesystem

fatls   - list files in a directory (default /)

flinfo  - print FLASH memory information

go      - start application at address 'addr'

gpio - read/write on gpio pins

help    - print online help

i2c - read/write on i2c bus

id_eeprom     - peek/poke EEPROM

ide     - IDE sub-system

iminfo  - print header information for application p_w_picpath

imls    - list all p_w_picpaths found in flash

itest   - return true/false on integer compare

loadb   - load binary file over serial line (kermit mode)

loads   - load S-Record file over serial line

loady   - load binary file over serial line (ymodem mode)

loop    - infinite loop on address range

ls609x_read_reg - Read 88E6097 register

md      - memory display

mdkinit      - start MDK

mm      - memory modify (auto-incrementing)

mtest   - simple RAM test

mw      - memory write (fill)

nfs     - boot p_w_picpath via network using NFS protocol

nm      - memory modify (constant address)

pci     - list and access PCI Configuration Space

pciemd      - pcie memory display

pciemw      - pcie memory write

pciereset      - do PCIE reset

ping    - send ICMP ECHO_REQUEST to network host

printenv- print environment variables

protect - enable or disable FLASH write protection

rarpboot- boot p_w_picpath via network using RARP/TFTP protocol

read64    - read 64 bit word from 64 bit address

read64b    - read 8 bit word from 64 bit address

read64l    - read 32 bit word from 64 bit address

read_cmp    - read and compare memory to val

reset   - Perform RESET of the CPU

run     - run commands in an environment variable

saveenv - save environment variables to persistent storage

setenv  - set environment variables

sleep   - delay execution for some time

smi     - peek/poke SMI devices

tftpboot- boot p_w_picpath via network using TFTP protocol

usb     - USB sub-system

usbboot - boot from USB device

version - print monitor version

watchdog <start | stop | show | pat>

write64    - write 64 bit word to 64 bit address

write64b    - write 8 bit word to 64 bit address

write64l    - write 32 bit word to 64 bit address

 

清除 FLASH 中的配置并重启

=> erase ?

Usage:

erase   - erase FLASH memory

=> reset

 

Consoles: U-Boot console
Found compatible API, ver. 7

FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.1 (marcelm@apg-bbuild01.juniper.net, Wed Feb 6 11:23:55 PST 2008)
Memory: 1024MB
Loading /boot/defaults/loader.conf
Unable to load a kernel!
-
can't load '/kernel'
can't load '/kernel.old'

Type '?' for a list of commands, 'help' for more detailed help.
loader>

 

loader>  set ipaddr=192.168.168.130

loader> set  netmask=255.255.255.0

loader>

loader>

loader> install tftp://192.168.168.9/junos-srxsme-10.0R2.10-domestic.tgz

 

等待时间比较长。。。。
 
 
风不停
QQ 76900998
MSN yazai_200@hotmail.com