ansible 批量配置cisco 交换机---接口篇

关于ansible不做介绍。
本例主要通过实例介绍ansible配置ios接口的几种方法，或者说可利用哪些模块配置接口。

1 .主机列表，本次测试以1台主机为例

[root@Ansible-01 ansible]# cat hosts
[cisco]
172.16.254.130 ansible_connection=local 

2.playbooks内容

[root@Ansible-01 interface]# cat interface-phy.yml 
---
- name: interface config 
  hosts: cisco
 # vars: 
 #    creds:
 #         username: "{
   { username }}"
 #         password: "{
   { password }}"
  gather_facts: no

  tasks:
  - name: action interface G1-2 configure
    ios_config:
       lines:
          - no shutdown
          - switch mode trunk
          - switch trunk allow vlan all
          - do wr
       parents: interface range gigabitEthernet 1/0/1 - 2

  - name: action interface G3 configuration
    ios_l2_interface:
        name: GigabitEthernet1/0/3
        mode: access
        access_vlan: 100 

  - name: action in