FastDFS源代码分析之tracker协议分析

最新推荐文章于 2022-08-17 23:38:57 发布

weixin_33860722

最新推荐文章于 2022-08-17 23:38:57 发布

阅读量225

点赞数

本篇博客主要解说fastdfs中tracker协议的解说。

fastdfs主要是存储文件。直接把整个文件存储到磁盘上，所以。简单直接。可是也有非常大的局限性。

因此，fastdfs对文件的文件夹设置和存储是最为核心的。

为什么这么突然的解说这些。由于我已经看了一段时间的fastdfs，主要结构都已经搞的比較清晰了。因此，这篇文章。我就主要一tracker这一部分的协议来分析。

其它详细介绍tracker的请百度。我就不介绍了，我就直接从

int tracker_deal_task(struct fast_task_info *pTask)

这种方法開始对每一个case分析。

1、storage心跳协议

case TRACKER_PROTO_CMD_STORAGE_BEAT:
			TRACKER_CHECK_LOGINED(pTask)
			result = tracker_deal_storage_beat(pTask);
			break;

自然。该协议是从storage层发送给tracker层的数据包，

#define TRACKER_PROTO_CMD_STORAGE_BEAT              83  //storage heart beat

那么，storage主要是做了什么：

storage在启动的时候，会开启一个线程，该线程为

static void *tracker_report_thread_entrance(void *arg)

该函数主要是做了依据配置连接对应的它的组的tacker。做一些事情，这里有个while循环，代码例如以下

current_time = g_current_time;
			if (current_time - last_beat_time >= \
					g_heart_beat_interval)
			{
				if (tracker_heart_beat(pTrackerServer, \
					&stat_chg_sync_count, \
					&bServerPortChanged) != 0)
				{
					break;
				}

也就是至少30秒钟来一次心跳。心跳包的主要数据是包头和当前storage的状态信息，

char out_buff[sizeof(TrackerHeader) + sizeof(FDFSStorageStatBuff)];

/* struct for network transfering */
typedef struct
{
	char sz_total_upload_count[8];
	char sz_success_upload_count[8];
	char sz_total_append_count[8];
	char sz_success_append_count[8];
	char sz_total_modify_count[8];
	char sz_success_modify_count[8];
	char sz_total_truncate_count[8];
	char sz_success_truncate_count[8];
	char sz_total_set_meta_count[8];
	char sz_success_set_meta_count[8];
	char sz_total_delete_count[8];
	char sz_success_delete_count[8];
	char sz_total_download_count[8];
	char sz_success_download_count[8];
	char sz_total_get_meta_count[8];
	char sz_success_get_meta_count[8];
	char sz_total_create_link_count[8];
	char sz_success_create_link_count[8];
	char sz_total_delete_link_count[8];
	char sz_success_delete_link_count[8];
	char sz_total_upload_bytes[8];
	char sz_success_upload_bytes[8];
	char sz_total_append_bytes[8];
	char sz_success_append_bytes[8];
	char sz_total_modify_bytes[8];
	char sz_success_modify_bytes[8];
	char sz_total_download_bytes[8];
	char sz_success_download_bytes[8];
	char sz_total_sync_in_bytes[8];
	char sz_success_sync_in_bytes[8];
	char sz_total_sync_out_bytes[8];
	char sz_success_sync_out_bytes[8];
	char sz_total_file_open_count[8];
	char sz_success_file_open_count[8];
	char sz_total_file_read_count[8];
	char sz_success_file_read_count[8];
	char sz_total_file_write_count[8];
	char sz_success_file_write_count[8];
	char sz_last_source_update[8];
	char sz_last_sync_update[8];
	char sz_last_synced_timestamp[8];
	char sz_last_heart_beat_time[8];
} FDFSStorageStatBuff;

tracker主要是做了什么呢？

对其进行解包，然后对这个保存在本地的storage的信息进行保存到文件里，调用

	status = tracker_save_storages();

调用

	tracker_mem_active_store_server(pClientInfo->pGroup, \
				pClientInfo->pStorage);

将这个存储服务器假设没有，就插入到group中。

最后调用

static int tracker_check_and_sync(struct fast_task_info *pTask, \
			const int status)

检查对应的改变状态。并将其同步等。

（须要再具体看看）

2、报告对应同步时间

#define TRACKER_PROTO_CMD_STORAGE_SYNC_REPORT	    89  //report src last synced time as dest server

相同在storage的report线程运行

if (sync_time_chg_count != g_sync_change_count && \
				current_time - last_sync_report_time >= \
					g_heart_beat_interval)
			{
				if (tracker_report_sync_timestamp( \
					pTrackerServer, &bServerPortChanged)!=0)
				{
					break;
				}

				sync_time_chg_count = g_sync_change_count;
				last_sync_report_time = current_time;
			}

详细的数据包为

pEnd = g_storage_servers + g_storage_count;
	for (pServer=g_storage_servers; pServer<pEnd; pServer++)
	{
		memcpy(p, pServer->server.id, FDFS_STORAGE_ID_MAX_SIZE);
		p += FDFS_STORAGE_ID_MAX_SIZE;
		int2buff(pServer->last_sync_src_timestamp, p);
		p += 4;
	}

也就是遍历当前进程的本组全部storageserver，和上次同步的时间戳。给trackerserver。

然后tracker的server存储结构为

pClientInfo->pGroup->last_sync_timestamps \
				[src_index][dest_index] = sync_timestamp;

dest_index 值为当前连接所在组的索引值

dest_index = tracker_mem_get_storage_index(pClientInfo->pGroup,
			pClientInfo->pStorage);
	if (dest_index < 0 || dest_index >= pClientInfo->pGroup->count)
	{
		status = 0;
		break;
	}

由于本链接的storage是固定不变的，而src_index就是为本组的其它storage的id索引，

首相通过id。（ip地址）找到详细的storage。然后在通过指针找到索引位置，

最后。调用

	if (++g_storage_sync_time_chg_count % \
			TRACKER_SYNC_TO_FILE_FREQ == 0)
	{
		status = tracker_save_sync_timestamps();
	}
	else
	{
		status = 0;
	}
	} while (0);

	return tracker_check_and_sync(pTask, status);

定时保存文件和检查等

3、上报磁盘情况

#define TRACKER_PROTO_CMD_STORAGE_REPORT_DISK_USAGE 84 //report disk usage

相同线程定时调用。

	if (current_time - last_df_report_time >= \
					g_stat_report_interval)
			{
				if (tracker_report_df_stat(pTrackerServer, \
						&bServerPortChanged) != 0)
				{
					break;
				}

				last_df_report_time = current_time;
			}

相同上报这些数据

for (i=0; i<g_fdfs_store_paths.count; i++)
	{
		if (statvfs(g_fdfs_store_paths.paths[i], &sbuf) != 0)
		{
			logError("file: "__FILE__", line: %d, " \
				"call statfs fail, errno: %d, error info: %s.",\
				__LINE__, errno, STRERROR(errno));

			if (pBuff != out_buff)
			{
				free(pBuff);
			}
			return errno != 0 ? errno : EACCES;
		}

		g_path_space_list[i].total_mb = ((int64_t)(sbuf.f_blocks) * \
					sbuf.f_frsize) / FDFS_ONE_MB;
		g_path_space_list[i].free_mb = ((int64_t)(sbuf.f_bavail) * \
					sbuf.f_frsize) / FDFS_ONE_MB;
		long2buff(g_path_space_list[i].total_mb, pStatBuff->sz_total_mb);
		long2buff(g_path_space_list[i].free_mb, pStatBuff->sz_free_mb);

		pStatBuff++;
	}

tracker这边存储在

int64_t *path_total_mbs; //total disk storage in MB
int64_t *path_free_mbs; //free disk storage in MB

这里

path_total_mbs[i] = buff2long(pStatBuff->sz_total_mb);
		path_free_mbs[i] = buff2long(pStatBuff->sz_free_mb);

		pClientInfo->pStorage->total_mb += path_total_mbs[i];
		pClientInfo->pStorage->free_mb += path_free_mbs[i];

4、storage服增加到tracker

#define TRACKER_PROTO_CMD_STORAGE_JOIN              81

storage线程相同在该处调用

if (tracker_report_join(pTrackerServer, tracker_index, \
					sync_old_done) != 0)
		{
			sleep(g_heart_beat_interval);
			continue;
		}

发送的包体数据包为：

typedef struct
{
	char group_name[FDFS_GROUP_NAME_MAX_LEN+1];
	char storage_port[FDFS_PROTO_PKG_LEN_SIZE];
	char storage_http_port[FDFS_PROTO_PKG_LEN_SIZE];
	char store_path_count[FDFS_PROTO_PKG_LEN_SIZE];
	char subdir_count_per_path[FDFS_PROTO_PKG_LEN_SIZE];
	char upload_priority[FDFS_PROTO_PKG_LEN_SIZE];
	char join_time[FDFS_PROTO_PKG_LEN_SIZE]; //storage join timestamp
	char up_time[FDFS_PROTO_PKG_LEN_SIZE];   //storage service started timestamp
	char version[FDFS_VERSION_SIZE];   //storage version
	char domain_name[FDFS_DOMAIN_NAME_MAX_SIZE];
	char init_flag;
	signed char status;
	char tracker_count[FDFS_PROTO_PKG_LEN_SIZE];  //all tracker server count
} TrackerStorageJoinBody;

当赋值完毕后。在气候变增加

p = out_buff + sizeof(TrackerHeader) + sizeof(TrackerStorageJoinBody);
	pServerEnd = g_tracker_group.servers + g_tracker_group.server_count;
	for (pServer=g_tracker_group.servers; pServer<pServerEnd; pServer++)
	{
		/*
		if (strcmp(pServer->ip_addr, pTrackerServer->ip_addr) == 0 && \
			pServer->port == pTrackerServer->port)
		{
			continue;
		}
		tracker_count++;
		*/

		sprintf(p, "%s:%d", pServer->ip_addr, pServer->port);
		p += FDFS_PROTO_IP_PORT_SIZE;
	}

增加全部tracker的server信息格式为ip:port

tracker server接收

	case TRACKER_PROTO_CMD_STORAGE_JOIN:
			result = tracker_deal_storage_join(pTask);
			break;

获取到的相关信息存储到

typedef struct
{
	int storage_port;
	int storage_http_port;
	int store_path_count;
	int subdir_count_per_path;
	int upload_priority;
	int join_time; //storage join timestamp (create timestamp)
	int up_time;   //storage service started timestamp
        char version[FDFS_VERSION_SIZE];   //storage version
	char group_name[FDFS_GROUP_NAME_MAX_LEN + 1];
        char domain_name[FDFS_DOMAIN_NAME_MAX_SIZE];
        char init_flag;
	signed char status;
	int tracker_count;
	ConnectionInfo tracker_servers[FDFS_MAX_TRACKERS];
} FDFSStorageJoinBody;

这些结构体内

同一时候插入本地内存

result = tracker_mem_add_group_and_storage(pClientInfo, \
pTask->client_ip, &joinBody, true);

同一时候把发消息报的id传过来

	pJoinBodyResp = (TrackerStorageJoinBodyResp *)(pTask->data + \
				sizeof(TrackerHeader));
	memset(pJoinBodyResp, 0, sizeof(TrackerStorageJoinBodyResp));

	if (pClientInfo->pStorage->psync_src_server != NULL)
	{
		strcpy(pJoinBodyResp->src_id, \
			pClientInfo->pStorage->psync_src_server->id);
	}

5、报告存储状态

#define TRACKER_PROTO_CMD_STORAGE_REPORT_STATUS     76  //report specified storage server status

storageserver调用

int tracker_report_storage_status(ConnectionInfo *pTrackerServer, \
		FDFSStorageBrief *briefServer)

内容主要是组名字

strcpy(out_buff + sizeof(TrackerHeader), g_group_name);

和简要信息

	memcpy(out_buff + sizeof(TrackerHeader) + FDFS_GROUP_NAME_MAX_LEN, \
			briefServer, sizeof(FDFSStorageBrief));

其结构体例如以下

typedef struct
{
	char status;
	char port[4];
	char id[FDFS_STORAGE_ID_MAX_SIZE];
	char ip_addr[IP_ADDRESS_SIZE];
} FDFSStorageBrief;

6、从tracker获取storage状态。

#define TRACKER_PROTO_CMD_STORAGE_GET_STATUS	    71  //get storage status from tracker

该协议是由client发起

调用流程例如以下：

int tracker_get_storage_status(ConnectionInfo *pTrackerServer, \
		const char *group_name, const char *ip_addr, \
		FDFSStorageBrief *pDestBuff)
int tracker_get_storage_max_status(TrackerServerGroup *pTrackerGroup, \
		const char *group_name, const char *ip_addr, \
		char *storage_id, int *status)	
int tracker_get_storage_status(ConnectionInfo *pTrackerServer, \
		const char *group_name, const char *ip_addr, \
		FDFSStorageBrief *pDestBuff)

获取自己的状态，

包体格式组名 ip的字符串

tracker通过获取了对应的数据。查找到storage的信息

结构体为：

typedef struct
{
	char status;
	char port[4];
	char id[FDFS_STORAGE_ID_MAX_SIZE];
	char ip_addr[IP_ADDRESS_SIZE];
} FDFSStorageBrief;

赋值后。返回

7、通过tracker获取storageid

#define TRACKER_PROTO_CMD_STORAGE_GET_SERVER_ID 70 //get storage server id from tracker

和上以协议请求一样 groupname+ip 组成。

tracker处理方法

static int tracker_deal_get_storage_id(struct fast_task_info *pTask)

tracker最后通过

FDFSStorageIdInfo *fdfs_get_storage_id_by_ip(const char *group_name, \
		const char *pIpAddr)
{
	FDFSStorageIdInfo target;
	memset(&target, 0, sizeof(FDFSStorageIdInfo));
	snprintf(target.group_name, sizeof(target.group_name), "%s", group_name);
	snprintf(target.ip_addr, sizeof(target.ip_addr), "%s", pIpAddr);
	return (FDFSStorageIdInfo *)bsearch(&target, g_storage_ids_by_ip, \
		g_storage_id_count, sizeof(FDFSStorageIdInfo), \
		fdfs_cmp_group_name_and_ip);
}

该方法获取了了

FDFSStorageIdInfo

信息。然后赋值，返回。

8、通过tracker获取全部storageserver

#define TRACKER_PROTO_CMD_STORAGE_FETCH_STORAGE_IDS 69  //get all storage ids from tracker

	for (i=0; i<5; i++)
	{
		for (pGServer=pServerStart; pGServer<pServerEnd; pGServer++)
		{
			memcpy(pTServer, pGServer, sizeof(ConnectionInfo));
			pTServer->sock = -1;
			result = fdfs_get_storage_ids_from_tracker_server(pTServer);
			if (result == 0)
			{
				return result;
			}
		}

		if (pServerStart != pTrackerGroup->servers)
		{
			pServerStart = pTrackerGroup->servers;
		}
		sleep(1);
	}

调用顺序

int storage_func_init(const char *filename, char *bind_addr, const int addr_size)
int fdfs_get_storage_ids_from_tracker_group(TrackerServerGroup *pTrackerGroup)
int fdfs_get_storage_ids_from_tracker_server(ConnectionInfo *pTrackerServer)

tracker函数。每秒钟中调用。遍历全部的trackersserver

trackerserver获取

case TRACKER_PROTO_CMD_STORAGE_FETCH_STORAGE_IDS:
			result = tracker_deal_fetch_storage_ids(pTask);
			break;

然后通过这样的协议格式

</pre></p><p>返回的数据</p><p></p><pre name="code" class="cpp">pIdsStart = g_storage_ids_by_ip + start_index;
	pIdsEnd = g_storage_ids_by_ip + g_storage_id_count;
	for (pIdInfo = pIdsStart; pIdInfo < pIdsEnd; pIdInfo++)
	{
		if ((int)(p - pTask->data) > pTask->size - 64)
		{
			break;
		}

		p += sprintf(p, "%s %s %s\n", pIdInfo->id, \
			pIdInfo->group_name, pIdInfo->ip_addr);
	}

返回给请求者。

9、回复给新的storage

#define TRACKER_PROTO_CMD_STORAGE_REPLICA_CHG       85  //repl new storage servers

storageserver调用流程：

剩下的协议

static int tracker_merge_servers(ConnectionInfo *pTrackerServer, \
		FDFSStorageBrief *briefServers, const int server_count)

case TRACKER_PROTO_CMD_SERVICE_QUERY_FETCH_ONE:
			result = tracker_deal_service_query_fetch_update( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_UPDATE:
			result = tracker_deal_service_query_fetch_update( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_FETCH_ALL:
			result = tracker_deal_service_query_fetch_update( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_STORE_WITHOUT_GROUP_ONE:
			result = tracker_deal_service_query_storage( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_STORE_WITH_GROUP_ONE:
			result = tracker_deal_service_query_storage( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_STORE_WITHOUT_GROUP_ALL:
			result = tracker_deal_service_query_storage( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVICE_QUERY_STORE_WITH_GROUP_ALL:
			result = tracker_deal_service_query_storage( \
					pTask, pHeader->cmd);
			break;
		case TRACKER_PROTO_CMD_SERVER_LIST_ONE_GROUP:
			result = tracker_deal_server_list_one_group(pTask);
			break;
		case TRACKER_PROTO_CMD_SERVER_LIST_ALL_GROUPS:
			result = tracker_deal_server_list_all_groups(pTask);
			break;
		case TRACKER_PROTO_CMD_SERVER_LIST_STORAGE:
			result = tracker_deal_server_list_group_storages(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_SYNC_SRC_REQ:
			result = tracker_deal_storage_sync_src_req(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_SYNC_DEST_REQ:
			TRACKER_CHECK_LOGINED(pTask)
			result = tracker_deal_storage_sync_dest_req(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_SYNC_NOTIFY:
			result = tracker_deal_storage_sync_notify(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_SYNC_DEST_QUERY:
			result = tracker_deal_storage_sync_dest_query(pTask);
			break;
		case TRACKER_PROTO_CMD_SERVER_DELETE_STORAGE:
			result = tracker_deal_server_delete_storage(pTask);
			break;
		case TRACKER_PROTO_CMD_SERVER_SET_TRUNK_SERVER:
			result = tracker_deal_server_set_trunk_server(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_REPORT_IP_CHANGED:
			result = tracker_deal_storage_report_ip_changed(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_CHANGELOG_REQ:
			result = tracker_deal_changelog_req(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_PARAMETER_REQ:
			result = tracker_deal_parameter_req(pTask);
			break;
		case FDFS_PROTO_CMD_QUIT:
			close(pTask->ev_read.ev_fd);
			task_finish_clean_up(pTask);
			return 0;
		case FDFS_PROTO_CMD_ACTIVE_TEST:
			result = tracker_deal_active_test(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_GET_STATUS:
			result = tracker_deal_get_tracker_status(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_GET_SYS_FILES_START:
			result = tracker_deal_get_sys_files_start(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_GET_ONE_SYS_FILE:
			result = tracker_deal_get_one_sys_file(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_GET_SYS_FILES_END:
			result = tracker_deal_get_sys_files_end(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_REPORT_TRUNK_FID:
			TRACKER_CHECK_LOGINED(pTask)
			result = tracker_deal_report_trunk_fid(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_FETCH_TRUNK_FID:
			TRACKER_CHECK_LOGINED(pTask)
			result = tracker_deal_get_trunk_fid(pTask);
			break;
		case TRACKER_PROTO_CMD_STORAGE_REPORT_TRUNK_FREE:
			TRACKER_CHECK_LOGINED(pTask)
			result = tracker_deal_report_trunk_free_space(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_PING_LEADER:
			result = tracker_deal_ping_leader(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_NOTIFY_NEXT_LEADER:
			result = tracker_deal_notify_next_leader(pTask);
			break;
		case TRACKER_PROTO_CMD_TRACKER_COMMIT_NEXT_LEADER:
			result = tracker_deal_commit_next_leader(pTask);
			break;

weixin_33860722

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
FastDFS源代码分析之tracker协议分析

本篇博客主要解说fastdfs中tracker协议的解说。fastdfs主要是存储文件。直接把整个文件存储到磁盘上，所以。简单直接。可是也有非常大的局限性。因此，fastdfs对文件的文件夹设置和存储是最为核心的。为什么这么突然的解说这些。由于我已经看了一段时间的fastdfs，主要结构都已经搞的比較清晰了。因此，这篇文章。我就主要一tracker这一部分的协议来分析。...
复制链接

扫一扫