linux6.4配置静态ip,centos6.4静态ip设置于eth1的问题

星期五, 2013-09-06 | Author:

LeeAuthor: Lee

Name: lee

Email: service@i5a6.com

Site: https://www.pomelolee.com/About: webgame网页,手机游戏服务端架构和开发者

| linux |

5,483 views

centos6.4的版本安装好,发现系统内只有eth1,而且/etc/sysconfig/network-scripts/下只有ifcfg-eth0文件,虽然可以上网,但无法设置静态IP.

解决方法：vi /etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules

# program, run by the persistent-net-generator.rules rules file.

#

# You can modify it, as long as you keep each rule on a single

# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100e (e1000)

#SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:f2:31:9b”, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″

# PCI device 0x8086:0x100e (e1000)

SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:9d:08:ba“, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1”

上面一个eth0直接注释掉,下面一个eth1改为eth0,记录对应的网卡地址 再编辑ifcfg-eth0 如下

DEVICE=eth0

HWADDR=08:00:27:9D:08:BA

#UUID=accb31df-ac8b-474c-aad8-b1ecd68ad346

NM_CONTROLLED=yes

#BOOTPROTO=dhcp

BOOTPROTO=static

IPADDR=192.168.0.188

GATEWAY=192.168.0.1

NETMASK=255.255.255.0

ONBOOT=yes

TYPE=Ethernet

DNS1=192.168.0.1

~

网关设置 (上面配置了这里路不用)

在文件vi /etc/sysconfig/network最后一行加入：

GATEWAY=192.168.0.1

/etc/init.d/network restart 重启网络

注：后面要加下DNS1 否则无法上网(oracle VM 安装)

~

~谢谢打赏~

赏