原创作品谢绝转载！

两个EIGRP AS系统左边为AS 50，右边为AS 100。
1，实现AS内部的互联互通

2，在R3，R4上分别做默认路由
     r3(config)#ip route 0.0.0.0 0.0.0.0 s1/0

     r4(config)#ip route 0.0.0.0 0.0.0.0 s1/2

3，R3，R4上分别做静态路由的重发布
     r3(config)#router eig 50
     r3(config-router)#redistribute static

     r4(config)#router ei 100
     r4(config-router)#redistribute static

4，验证

     r1#show ip rout
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 13.13.13.3 to network 0.0.0.0

     34.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
D       34.34.34.0/24 [90/2681856] via 13.13.13.3, 00:25:22, Serial1/0
D EX    34.0.0.0/8 [170/2681856] via 13.13.13.3, 00:25:22, Serial1/0
     1.0.0.0/8 is variably subnetted, 6 subnets, 2 masks
C       1.1.0.0/24 is directly connected, Loopback0
D       1.1.0.0/16 is a summary, 00:25:27, Null0
C       1.1.1.0/24 is directly connected, Loopback1
C       1.1.2.0/24 is directly connected, Loopback2
C       1.1.3.0/24 is directly connected, Loopback3
C       1.1.4.0/24 is directly connected, Loopback4
     2.0.0.0/16 is subnetted, 1 subnets
D       2.2.0.0 [90/2809856] via 13.13.13.3, 00:22:53, Serial1/0
     23.0.0.0/24 is subnetted, 1 subnets
D       23.23.23.0 [90/2681856] via 13.13.13.3, 00:25:24, Serial1/0
     13.0.0.0/24 is subnetted, 1 subnets
C       13.13.13.0 is directly connected, Serial1/0
D*EX 0.0.0.0/0 [170/2681856] via 13.13.13.3, 00:25:24, Serial1/0

r1#p 56.56.56.5

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 56.56.56.5, timeout is 2 seconds:
!!!!!