https://www.cnblogs.com/liuyisai/p/5990645.html
lvs+keepalived+nginx实现高性能负载均衡集群
一、为什么要使用负载均衡技术?
1、系统高可用性
2、 系统可扩展性
3、 负载均衡能力
LVS+keepalived能很好的实现以上的要求,LVS提供负载均衡,keepalived提供健康检查,故障转移,提高系统的可用性!采用这样的架构以后很容易对现有系统进行扩展,只要在后端添加或者减少realserver,只要更改lvs的配置文件,并能实现无缝配置变更!
二、LVS+Keepalived介绍
1、 LVS
LVS是一个开源的软件,可以实现LINUX平台下的简单负载均衡。LVS是Linux Virtual Server的缩写,意思是Linux虚拟服务器。目前有三种IP负载均衡技术(VS/NAT、VS/TUN和VS/DR);八种调度算法(rr,wrr,lc,wlc,lblc,lblcr,dh,sh)。
2、 keepalived
Keepalived 是运行在lvs 之上,它的主要功能是实现真实机的故障隔离及负载均衡器间的失败切换,提高系统的可用性
三、环境:
四台服务器,系统全为CentOS6.8:
192.168.2.203 master lvs+keepalived
192.168.2.202 backup lvs+keepalived
192.168.2.204 web1(nginx)
192.168.2.205 web2 (nginx)
vip:192.168.2.13
其中nginx已预装好,这里不再写搭建过程
四、搭建并配置
1、分别在backup lvs和master lvs上安装lvs
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
1root@bogon src]# yum -y install ipvsadm 2已加载插件:fastestmirror 3设置安装进程 4Determining fastest mirrors 5epel/metalink |5.4kB00:00 6*base: mirror.lzu.edu.cn 7... ... 8已安装: 9ipvsadm.x86_640:1.26-4.el6 1011作为依赖被安装:12libnl.x86_640:1.1.4-2.el6 1314完毕!
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
2、把ipvsadm模块加载进系统
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
1[root@bogon src]# ipvsadm2IP Virtual Server version1.2.1(size=4096)3Prot LocalAddress:Port Scheduler Flags4-> RemoteAddress:Port Forward Weight ActiveConn InActConn5[root@bogon src]#lsmod|grep ip_vs6ip_vs12689707libcrc32c12461 ip_vs8ipv6336282270ip_vs,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
3、分别在backup lvs和master lvs上安装keepalived(keepalived官网:http://www.keepalived.org/)
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon src]#tarzxf keepalived-1.2.24.tar.gz
[root@bogon src]# cd keepalived-1.2.24[root@bogon keepalived-1.2.24]# ./configure --sysconf=/etc --with-kernel-dir=/lib/modules/2.6.32-642.3.1.el6.x86_64/报错:
configure: error:
!!! OpenSSL is not properly installed on your system. !!! !!! Can not include OpenSSL headers files. !!!
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
系统缺少openssl-devel包所致
安装openssl-devel
root@bogon keepalived-1.2.24]#yum-yinstallopenssl-devel
再次编辑安装
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]# ./configure --sysconf=/etc --with-kernel-dir=/lib/modules/2.6.32-642.3.1.el6.x86_64/Keepalived configuration------------------------Keepalived version : 1.2.24Compiler : gccPreprocessor flags : -I/lib/modules/2.6.32-642.3.1.el6.x86_64//includeCompiler flags : -Wall -Wunused -Wstrict-prototypes
Linker flags :
Extra Lib : -ldl -lssl -lcrypto
Use IPVS Framework : Yes
IPVS use libnl : No
IPVS syncd attributes : No
IPVS 64 bit stats : No
fwmark socket support : Yes
Use VRRP Framework : Yes
Use VRRP VMAC : Yes
Use VRRP authentication : Yes
With ip rules/routes : Yes
SNMP keepalived support : No
SNMP checker support : No
SNMP RFCv2 support : No
SNMP RFCv3 support : No
SHA1 support : No
Use Debug flags : No
Stacktrace support : No
Memory alloc check : No
libnl version : None
Use IPv4 devconf : No
Use libiptc : No
Use libipset : No
Build genhash : Yes
Build documentation : No
[root@bogon keepalived-1.2.24]#make&&makeinstall
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]#ln-s /usr/local/sbin/keepalived /sbin/[root@bogon keepalived-1.2.24]# chkconfig --add keepalived
[root@bogon keepalived-1.2.24]# chkconfig --level35keepalived on
4、配置keepalived
lvs-master的配置文件如下
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]#cat/etc/keepalived/keepalived.conf! Configuration Fileforkeepalivedglobal_defs { #全局配置部分# notification_email {#email 通知,基本不用此处所以注释掉# acassen@firewall.loc# failover@firewall.loc# sysadmin@firewall.loc# }# notification_email_from Alexandre.Cassen@firewall.loc# smtp_server192.168.200.1# smtp_connect_timeout 30router_id LVS_DEVEL#设置lvs的id,在一个网络内应该是唯一的vrrp_skip_check_adv_addr vrrp_strict vrrp_garp_interval0 vrrp_gna_interval 0}vrrp_instance VI_1 { #vrrp实例定义部分 state MASTER#设置lvs的状态,报错MASTER和BACKUP两种,必须大写interface eth1#设置对外服务的接口virtual_router_id60 #设置虚拟路由标示,这个标示是一个数字,同一个vrrp实例使用唯一标示 priority 100 #定义优先级,数字越大优先级越高,在一个vrrp——instance下,master的优先级必须大于backup advert_int 1 #设定master与backup负载均衡器之间同步检查的时间间隔,单位是秒 authentication { #设置验证类型和密码
auth_type PASS #主要有PASS和AH两种
auth_pass 1111 #验证密码,同一个vrrp_instance下MASTER和BACKUP密码必须相同 }
virtual_ipaddress { #设置虚拟ip地址,可以设置多个,每行一个
192.168.2.13 }
}
virtual_server 192.168.2.1380 { #设置虚拟服务器,需要指定虚拟ip和服务端口
delay_loop 3#健康检查时间间隔lb_algo rr #负载均衡调度算法lb_kind DR#负载均衡转发规则persistence_timeout 50#设置会话保持时间,对动态网页非常有用 protocol TCP #指定转发协议类型,有TCP和UDP两种
real_server 192.168.2.20480 { #配置服务器节点1,需要指定real server的真实IP地址和端口
weight 1 #设置权重,数字越大权重越高 TCP_CHECK { #realserver的状态监测设置部分单位秒
connect_timeout 3 #超时时间 nb_get_retry 3 #重试次数 delay_before_retry 3 #重试间隔 connect_port 80 #监测端口
}
}
real_server 192.168.2.20580 {
weight 1 TCP_CHECK {
connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80 }
}
}
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
LVS-backup的配置文件如下
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]#cat/etc/keepalived/keepalived.conf! Configuration Filefor keepalived
global_defs {
# notification_email {
# acassen@firewall.loc
# failover@firewall.loc
# sysadmin@firewall.loc
# }
# notification_email_from Alexandre.Cassen@firewall.loc
# smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL
vrrp_skip_check_adv_addr
vrrp_strict
vrrp_garp_interval 0 vrrp_gna_interval 0}
vrrp_instance VI_1 {
state BACKUP
interface eth1
virtual_router_id 60 priority 80 advert_int 1 authentication {
auth_type PASS
auth_pass 1111 }
virtual_ipaddress {
192.168.2.13 }
}
virtual_server 192.168.2.1380 {
delay_loop 3 lb_algo rr
lb_kind DR
persistence_timeout 3 protocol TCP
real_server 192.168.2.20480 {
weight 1 TCP_CHECK {
connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80
}
}
real_server 192.168.2.20580 {
weight 1 TCP_CHECK {
connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 80 }
}
}
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
5、realserver的配置
两台web服务器都要执行下面脚本
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon www]#cat/etc/rc.d/init.d/realserver.sh
#!/bin/bash
# description: Config realserver lo and apply noarp
SNS_VIP=192.168.2.13/etc/rc.d/init.d/functions
case"$1"instart)
ifconfiglo:0$SNS_VIP netmask255.255.255.255 broadcast $SNS_VIP
/sbin/route add -host $SNS_VIP dev lo:0echo"1">/proc/sys/net/ipv4/conf/lo/arp_ignore
echo"2">/proc/sys/net/ipv4/conf/lo/arp_announce
echo"1">/proc/sys/net/ipv4/conf/all/arp_ignore
echo"2">/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null2>&1echo"RealServer Start OK"
;;
stop)
ifconfiglo:0 down
route del $SNS_VIP >/dev/null2>&1echo"0">/proc/sys/net/ipv4/conf/lo/arp_ignore
echo"0">/proc/sys/net/ipv4/conf/lo/arp_announce
echo"0">/proc/sys/net/ipv4/conf/all/arp_ignore
echo"0">/proc/sys/net/ipv4/conf/all/arp_announce
echo"RealServer Stoped" ;;*)
echo"Usage: $0 {start|stop}" exit 1esac
exit 0
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon www]# /etc/rc.d/init.d/realserver.sh start/etc/rc.d/init.d/realserver.sh: line6: /etc/rc.d/init.d/functions: 权限不够
RealServer Start OK
[root@bogon www]# ifconfigeth0 Link encap:Ethernet HWaddr 00:0C:29:41:71:DF
inet addr:192.168.12.129Bcast:192.168.12.255Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe41:71df/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500Metric:1 RX packets:728errors:0dropped:0overruns:0frame:0 TX packets:98errors:0dropped:0overruns:0carrier:0 collisions:0txqueuelen:1000
RX bytes:137311(134.0KiB) TX bytes:7369(7.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:0C:29:41:71:E9
inet addr:192.168.2.204Bcast:192.168.2.255Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe41:71e9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500Metric:1 RX packets:119838errors:0dropped:0overruns:0frame:0 TX packets:31612errors:0dropped:0overruns:0carrier:0 collisions:0txqueuelen:1000
RX bytes:23411786(22.3MiB) TX bytes:2119106(2.0 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536Metric:1 RX packets:2errors:0dropped:0overruns:0frame:0 TX packets:2errors:0dropped:0overruns:0carrier:0 collisions:0txqueuelen:0
RX bytes:182(182.0b) TX bytes:182(182.0 b)
lo:0 Link encap:Local Loopback
inet addr:192.168.2.13Mask:255.255.255.255 UP LOOPBACK RUNNING MTU:65536Metric:1
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
6、启动keepalived并进行测试
[root@bogon keepalived-1.2.24]# service keepalived start
正在启动 keepalived: [确定]
lvs-master
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]#tail-f /var/log/messages
Oct 2101:19:46bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:46bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:46bogon Keepalived_healthcheckers[6596]: Netlink reflector reports IP192.168.2.13 added
Oct 2101:19:46bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1(size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80rr persistent3->192.168.2.204:80Route100->192.168.2.205:80Route100
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
访问curl http://192.168.2.13/test.txt
[root@www etc]# curl http://192.168.2.13/test.txtit is web2
[root@www etc]# curl http://192.168.2.13/test.txtit is web2
关掉web2再次测试
[root@www etc]# curl http://192.168.2.13/test.txtit is web1
[root@www etc]# curl http://192.168.2.13/test.txtit is web1
查看lvs-master
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1(size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80rr persistent3->192.168.2.204:80Route102
[root@bogon keepalived-1.2.24]#tail-f /var/log/messages
Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:28:58bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Check on service [192.168.2.205]:80failed after1 retry.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Removing service [192.168.2.205]:80from VS [192.168.2.13]:80Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25 connected.
Oct 2101:29:31bogon Keepalived_healthcheckers[6596]: Timeout reading data to remote SMTP server [192.168.200.1]:25.
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
已经自动把web2剔除
打开web2再次查看
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1(size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80rr persistent3->192.168.2.204:80Route100->192.168.2.205:80Route100
[root@bogon keepalived-1.2.24]#tail-f /var/log/messages
Oct 2101:19:51bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2101:28:58bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Check on service [192.168.2.205]:80failed after1 retry.
Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Removing service [192.168.2.205]:80from VS [192.168.2.13]:80Oct 2101:29:01bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25 connected.
Oct 2101:29:31bogon Keepalived_healthcheckers[6596]: Timeout reading data to remote SMTP server [192.168.200.1]:25.
Oct 2101:31:01bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 success.
Oct 2101:31:01bogon Keepalived_healthcheckers[6596]: Adding service [192.168.2.205]:80to VS [192.168.2.13]:80Oct 2101:31:01bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25connected.
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
恢复后已自动添加进来
关掉lvs master的keepalived
[root@bogon keepalived-1.2.24]# service keepalived stop
停止 keepalived: [确定]
访问web并查看lvs backup
[root@www etc]# curl http://192.168.2.13/test.txtit is web2
[root@www etc]# curl http://192.168.2.13/test.txtit is web2
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@lys2 src]#tail-f /var/log/messages
Oct 2319:03:26lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct 2319:03:27lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct 2319:03:27lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct 2319:03:27lys2 Keepalived_healthcheckers[13123]: Netlink reflector reports IP192.168.2.13 added
Oct 2319:03:27lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:27lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1for192.168.2.13Oct 2319:03:27lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:27lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:27lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:27lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13Oct 2319:03:32lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1for192.168.2.13
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@lys2 src]# ip addr1: lo: mtu65536 qdisc noqueue state UNKNOWN
link/loopback00:00:00:00:00:00brd00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: eth0: mtu1500qdisc pfifo_fast state UP qlen1000 link/ether00:0c:29:89:0f:e3 brd ff:ff:ff:ff:ff:ff
inet 192.168.144.101/24brd192.168.144.255 scope global eth0
inet6 fe80::20c:29ff:fe89:fe3/64 scope link
valid_lft forever preferred_lft forever3: eth1: mtu1500qdisc pfifo_fast state UP qlen1000 link/ether00:0c:29:89:0f:ed brd ff:ff:ff:ff:ff:ff
inet 192.168.2.202/24brd192.168.2.255 scope global eth1
inet 192.168.2.13/32 scope global eth1
inet6 fe80::20c:29ff:fe89:fed/64 scope link
valid_lft forever preferred_lft forever
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
可以看到lvs backup已自动切换成master状态并自动绑定了vip
查看lvs master vip
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
[root@bogon keepalived-1.2.24]# ip addr1: lo: mtu65536 qdisc noqueue state UNKNOWN
link/loopback00:00:00:00:00:00brd00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: eth0: mtu1500qdisc pfifo_fast state UP qlen1000 link/ether00:0c:29:55:4d:7a brd ff:ff:ff:ff:ff:ff
inet 192.168.12.128/24brd192.168.12.255 scope global eth0
inet6 fe80::20c:29ff:fe55:4d7a/64 scope link
valid_lft forever preferred_lft forever3: eth1: mtu1500qdisc pfifo_fast state UP qlen1000 link/ether00:0c:29:55:4d:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.203/24brd192.168.2.255 scope global eth1
inet6 fe80::20c:29ff:fe55:4d84/64 scope link
valid_lft forever preferred_lft forever
![img_51e409b11aa51c150090697429a953ed.gif](https://i-blog.csdnimg.cn/blog_migrate/b6c494739269bbcf6062f4348b83cbbe.gif)
已自动解除vip
到处全部结束