竟然没写出来 还是比较坑,好吧
Color Representation Conversion
Time Limit: 1 Second Memory Limit: 32768 KB
So far, there are many color models in different area. For screen display, the most popular model is RGB color model. A color in the RGB color model is described indicating how much of each of the red, green, and blue is included. So one can easily determined a color by an RGB triplet (r, g, b). But there are other representation of the points in RGB color model,HSL and HSV are the two most popular representations among them and widely used in color pickers and in image editing software. They also use a triple (h,s,l) or (h,s,v) to determine a color but each component are with different meanings. each channel in HSL stands for hue, saturation, and lightness and in HSV stands for hue, saturation, and value. Note that while "hue" in HSL and HSV refers to the same attribute, their definitions of "saturation" differ dramatically.
For RGB triplet, we use digital 8-bit per channel notation, so the r,g,b can vary from 0 to 255. If all the components are at zero the result is black; if all are at maximum, the result is the brightest representable white.
For HSV and HSL, the hue channel is in unit of degrees, its value vary from 0 to 360(exclusive), and the saturation, lightness and value channel use percentage notation and their value vary from 0% to 100%.
For more detail about the RGB model and these representations, you can refer to HERE .
The problem here is ask you to implement a color representation conversion procedure to convert the representation between RGB,HSL and HSV following the methods below. Or you can find more detail of the converting method in HERE .
Converting HSV to RGB
Given a color with hue H ∈ [0°, 360°), saturation SHSV ∈ [0, 1], and value V ∈ [0, 1], we first find chroma:
![C = V \times S_{HSV}\,\!](http://static.oschina.net/uploads/img/201309/22224851_kgAN.jpg)
Then we can find a point (R1, G1, B1) along the bottom three faces of the RGB cube, with the same hue and chroma as our color (using the intermediate value X for the second largest component of this color):
![\begin{align} H^\prime &= \frac{H}{60^\circ} \\ X &= C (1 - |H^\prime \;\bmod 2 - 1|) \end{align}](http://static.oschina.net/uploads/img/201309/22224851_5XSf.jpg)
![(R_1, G_1, B_1) = \begin{cases} (0, 0, 0) &\mbox{if } H \mbox{ is undefined} \\ (C, X, 0) &\mbox{if } 0 \leq H^\prime < 1 \\ (X, C, 0) &\mbox{if } 1 \leq H^\prime < 2 \\ (0, C, X) &\mbox{if } 2 \leq H^\prime < 3 \\ (0, X, C) &\mbox{if } 3 \leq H^\prime < 4 \\ (X, 0, C) &\mbox{if } 4 \leq H^\prime < 5 \\ (C, 0, X) &\mbox{if } 5 \leq H^\prime < 6 \end{cases}](http://static.oschina.net/uploads/img/201309/22224851_mP0b.jpg)
![\begin{align} &m = V - C \\ &(R, G, B) = (R_1 + m, G_1 + m, B_1 + m) \end{align}](http://static.oschina.net/uploads/img/201309/22224851_fWCx.jpg)
Finally, we can find R, G, and B by adding the same amount to each component, to match value:
![\begin{align} &m = V - C \\ &(R, G, B) = (R_1 + m, G_1 + m, B_1 + m) \end{align}](http://static.oschina.net/uploads/img/201309/22224851_fWCx.jpg)
Converting HSL to RGB
Given an HSL color with hue H ∈ [0°, 360°), saturation SHSL ∈ [0, 1], and lightness L ∈ [0, 1], we can use the same strategy. First, we find chroma:
![C = \begin{align} (1 - \left\vert 2 L - 1 \right\vert) \times S_{HSL} \end{align}](http://static.oschina.net/uploads/img/201309/22224851_F4o7.jpg)
Then we can, again, find a point (R1, G1, B1) along the bottom three faces of the RGB cube, with the same hue and chroma as our color (using the intermediate value X for the second largest component of this color):
![\begin{align} H^\prime &= \frac{H}{60^\circ} \\ X &= C (1 - |H^\prime \;\bmod 2 - 1|) \end{align}](http://static.oschina.net/uploads/img/201309/22224851_5XSf.jpg)
![(R_1, G_1, B_1) = \begin{cases} (0, 0, 0) &\mbox{if } H \mbox{ is undefined} \\ (C, X, 0) &\mbox{if } 0 \leq H^\prime < 1 \\ (X, C, 0) &\mbox{if } 1 \leq H^\prime < 2 \\ (0, C, X) &\mbox{if } 2 \leq H^\prime < 3 \\ (0, X, C) &\mbox{if } 3 \leq H^\prime < 4 \\ (X, 0, C) &\mbox{if } 4 \leq H^\prime < 5 \\ (C, 0, X) &\mbox{if } 5 \leq H^\prime < 6 \end{cases}](http://static.oschina.net/uploads/img/201309/22224851_mP0b.jpg)
Finally, we can find R, G, and B by adding the same amount to each component, to match lightness:
![\begin{align} &m = L - \textstyle{\frac{1}{2}}C \\ &(R, G, B) = (R_1 + m, G_1 + m, B_1 + m) \end{align}](http://static.oschina.net/uploads/img/201309/22224851_v9kT.jpg)
Convert RGB to HSL and HSV
First unify (r, g, b) into a number between 0 and 1. Let max equals to the maximum value in r, g and b. Let min equals to the minimum value in r, g and b. The HSL is with hue h ∈ [0°, 360°), saturation s ∈ [0, 1], and lightness l ∈ [0, 1]
![h = \begin{cases} 0^\circ & \mbox{if } max = min \\ 60^\circ \times \frac{g - b}{max - min} + 0^\circ, & \mbox{if } max = r \mbox{ and } g \ge b \\ 60^\circ \times \frac{g - b}{max - min} + 360^\circ, & \mbox{if } max = r \mbox{ and } g < b \\ 60^\circ \times \frac{b - r}{max - min} + 120^\circ, & \mbox{if } max = g \\ 60^\circ \times \frac{r - g}{max - min} + 240^\circ, & \mbox{if } max = b \end{cases}](http://static.oschina.net/uploads/img/201309/22224852_BM0t.jpg)
![l = \begin{matrix} \frac{1}{2} \end{matrix} (max + min)](http://static.oschina.net/uploads/img/201309/22224852_p9o3.jpg)
![s = \begin{cases} 0 & \mbox{if } l = 0 \mbox{ or } max = min \\ \frac{max-min}{max+min} = \frac{max-min}{2l}, & \mbox{if } 0 \frac{1}{2} \end{cases}](http://static.oschina.net/uploads/img/201309/22224852_lxZ4.jpg)
When max = min, h is defined as 0.
HSL and HSV have the same definition of hue. The s and v value in HSV is defined as follows:
![s = \begin{cases} 0, & \mbox{if } max = 0 \\ \frac{max - min}{max} = 1 - \frac{min}{max}, & \mbox{otherwise} \end{cases}](http://static.oschina.net/uploads/img/201309/22224852_UCdb.jpg)
![v = max \,](http://static.oschina.net/uploads/img/201309/22224852_ZPLC.jpg)
Input
There are multiple cases in input. The first line of each case is name of the target representation which you need to convert to. The second line is the representation of the color. It could one of the RGB representation "RGBrgb"(0 ≤r,g,b≤ 255), or HSL representation "HSLhs%l%"(0 ≤h< 360; 0 ≤s,l≤ 100), or HSV representation "HSVhs%v%"(0 ≤h< 360; 0 ≤s,v≤ 100). Please note that all numeric value is integer.
Output
For each case, output the color representation in format of target representation. Each numeric value should round to nearest integer. See sample for more information.
Sample Input
HSL
RGB 174 82 144
HSV
HSL 62 80% 83%
RGB
HSV 324 56% 71%
Sample Output
HSL 320 36% 50%
HSV 62 28% 97%
RGB 181 80 140
#include <iostream>
#include <string.h>
#include <math.h>
#include <stdio.h>
using namespace std;
char f[5], t[5], rgb[5];
double h, sl ,sv, l, v, r, g, b;
double c, ht, x, m, r1, g1, b1, ma, mi;
void hsv2rgb(){
//cout<<v<<"v s "<<s<<endl;
c=v*sv;
ht=h/60;
x=c*(1-fabs(((((int)(ht*100000))%200000)*1.0)/100000 - 1));
//cout<<"ht "<<ht<<endl;
if(0<=ht && ht<1){
r1=c;
g1=x;
b1=0;
}
else if(1<=ht && ht<2){
r1=x;
g1=c;
b1=0;
}
else if(2<=ht && ht<3){
r1=0;
g1=c;
b1=x;
}
else if(3<=ht && ht<4){
r1=0;
g1=x;
b1=c;
}
else if(4<=ht && ht<5){
r1=x;
g1=0;
b1=c;
}
else if(5<=ht && ht<6){
r1=c;
g1=0;
b1=x;
}
else {
r1=0;
g1=0;
b1=0;
}
m=v-c;
/* r=(r1+m)*255;
g=(g1+m)*255;
b=(b1+m)*255;*/
r=(r1+m);
g=(g1+m);
b=(b1+m);
}
void hsl2rgb(){
c=(1-fabs(2*l-1))*sl;
// cout<<"c: "<<c<<endl;
ht=h/60;
x=c*(1-fabs(((((int)(ht*100000))%200000)*1.0)/100000 - 1));
// cout<<"ht: "<<ht<<endl;
//cout<<"x"<<x<<endl;
if(0<=ht && ht<1){
r1=c;
g1=x;
b1=0;
}
else if(1<=ht && ht<2){
r1=x;
g1=c;
b1=0;
}
else if(2<=ht && ht<3){
r1=0;
g1=c;
b1=x;
}
else if(3<=ht && ht<4){
r1=0;
g1=x;
b1=c;
}
else if(4<=ht && ht<5){
r1=x;
g1=0;
b1=c;
}
else if(5<=ht && ht<6){
r1=c;
g1=0;
b1=x;
}
else {
r1=0;
g1=0;
b1=0;
}
m=l-c/2;
// cout<<"m: "<<m<<endl;
/* r=(r1+m)*255;
g=(g1+m)*255;
b=(b1+m)*255;*/
r=(r1+m);
g=(g1+m);
b=(b1+m);
}
void rgb2hsl(){
r=r/255;
g=g/255;
b=b/255;
ma=r>g?(r>b?r:b):(g>b?g:b);
mi=r<g?(r<b?r:b):(g<b?g:b);
if(ma==mi){
h=0;
}else if(ma==r && g>=b){
h=60*(g-b)/(ma-mi)+0;
}else if(ma==r && g<b){
h=60*(g-b)/(ma-mi)+360;
}else if(ma==g){
h=60*(b-r)/(ma-mi)+120;
}else if(ma==b){
h=60*(r-g)/(ma-mi)+240;
}
l=(ma+mi)/2;
//cout<<l;
if(l==0 || ma==mi){
sl=0;
}
else if(0<=l && l<=0.5){
sl=(ma-mi)/(ma+mi);
}
else if(l>0.5){
sl=(ma-mi)/(2-(ma+mi));
}
}
void rgb2hsv(){
ma=r>g?(r>b?r:b):(g>b?g:b);
mi=r<g?(r<b?r:b):(g<b?g:b);
//cout<<r<<" "<<g<<" "<<b<<" "<<mi<<" "<<ma<<endl;
if(ma==mi){
h=0;
}else if(ma==r && g>=b){
h=60*(g-b)/(ma-mi)+0;
}else if(ma==r && g<b){
h=60*(g-b)/(ma-mi)+360;
}else if(ma==g){
h=60*(b-r)/(ma-mi)+120;
}else if(ma==b){
h=60*(r-g)/(ma-mi)+240;
}
if(ma==0){
sv=0;
}
else {
sv=(ma-mi)/ma;
}
v=ma;
}
int ff(double x)
{
int tmp;
tmp=floor(x);
tmp=(x-tmp-0.5>0.0000001?tmp+1:tmp);
return tmp;
}
int main(){
while(scanf("%s", t)!=EOF){
scanf("%s", f);;
if(strcmp(f, "RGB")==0){
scanf("%lf %lf %lf", &r, &g, &b);
//printf("rgb %lf %lf%% %lf%%\n", r, g, b);
}
else if(strcmp(f, "HSV")==0){
scanf("%lf %lf%% %lf%%", &h, &sv, &v);
//cout<<s<<" s v "<<v<<endl;
sv=sv/100;
v=v/100;
hsv2rgb();
//printf("rgb %lf %lf%% %lf%%\n", r, g, b);
}
else if(strcmp(f, "HSL")==0){
scanf("%lf %lf%% %lf%%", &h, &sl, &l);
sl=sl/100;
l=l/100;
hsl2rgb();
//printf("rgb %lf %lf%% %lf%%\n", r, g, b);
}
//********************************************************
if(strcmp(t, "RGB")==0){
printf("%s %d %d %d\n", t, ff(r*255), ff(g*255), ff(b*255));
}
else if(strcmp(t, "HSV")==0){
rgb2hsv();
printf("%s %d %d%% %d%%\n", t, ff(h), ff(sv*100), ff(v*100));
}
else if(strcmp(t, "HSL")==0){
rgb2hsl();
printf("%s %d %d%% %d%%\n", t, ff(h), ff(sl*100), ff(l*100));
}
}
return 0;
}