link
http://rabbitstack.github.io/deploying-cloud-foundry-on-openstack-juno-and-xenserver-part-ii/
Let's move on. We should have our OpenStack instance prepared for Cloud Foundry. The most usual way of deploying Cloud Foundry is through BOSH. For the who still didn't hear about it, BOSH is the platform for automation and lifecycle management of software and distributed services. It is also capable of monitoring and failure recovery of processes and virtual machines. There are already a few IT automation platforms in the market like Chef or Puppet, so, why to learn / use BOSH then?
One notable difference is that BOSH is able to perform the deployment from the sterile environment, i.e. package source code and dependencies, create the virtual machines (jobs in BOSH terminology) from the so calledstemcell template (VM which has BOSH agent installed and is used to generate the jobs), and finally install, start and monitor the required services and VMs. Visit the official page from the link above to learn more about BOSH.
Deploying MicroBOSH
MicroBOSH is a single VM which contains all the necessary components to boot BOSH, including the blobstore, nats, director, health manager etc. Once you have an instance of MicroBOSH running, you can deploy BOSH if you wish. Install BOSH CLI gems (Ruby >= 1.9.3 is required).
$ gem install bosh_cli bosh_cli_plugin_microYou will need to create a keypair in OpenStack and configure bosh security group with the rules shown in the table below. You can do it by accessing the Horizon dashboard or by using nova CLI.
| Direction | IP Protocol | Port Range | Remote |
|---|---|---|---|
| Ingress | TCP | 1-65535 | bosh |
| Ingress | TCP | 53 (DNS) | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 4222 | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 6868 | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 4222 | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 25250 | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 25555 | 0.0.0.0/0 (CIDR) |
| Ingress | TCP | 25777 | 0.0.0.0/0 (CIDR) |
| Ingress | UDP | 53 | 0.0.0.0/0 (CIDR) |
| Ingress | UDP | 68 | 0.0.0.0/0 (CIDR) |
$ nova keypair-add microbosh > microbosh.pem
$ chmod 600 microbosh.pemBOSH uses a variety of artifacts in order to complete the deployment life cycle. We can basically distinguish between stemcell, release and deployment. To deploy MicroBOSH we will only need a stemcell which can be downloaded using the bosh CLI. First get a list of available stemcells and download thebosh-stemcell-2839-openstack-kvm-centos-go_agent-raw.tgz.
$ bosh public stemcells
+-----------------------------------------------------------------+
| Name |
+-----------------------------------------------------------------+
| bosh-stemcell-2427-aws-xen-ubuntu.tgz | | bosh-stemcell-2652-aws-xen-centos.tgz | | bosh-stemcell-2839-aws-xen-centos-go_agent.tgz | | bosh-stemcell-2427-aws-xen-ubuntu-go_agent.tgz | | bosh-stemcell-2710-aws-xen-ubuntu-lucid-go_agent.tgz | | bosh-stemcell-2652-aws-xen-ubuntu-lucid.tgz | | bosh-stemcell-2839-aws-xen-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2690.6-aws-xen-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.1-aws-xen-centos-go_agent.tgz | | bosh-stemcell-2719.1-aws-xen-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.2-aws-xen-centos-go_agent.tgz | | bosh-stemcell-2719.2-aws-xen-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.3-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2427-aws-xen-ubuntu.tgz | | light-bosh-stemcell-2652-aws-xen-centos.tgz | | light-bosh-stemcell-2839-aws-xen-centos-go_agent.tgz | | light-bosh-stemcell-2427-aws-xen-ubuntu-go_agent.tgz | | light-bosh-stemcell-2710-aws-xen-ubuntu-lucid-go_agent.tgz | | light-bosh-stemcell-2652-aws-xen-ubuntu-lucid.tgz | | light-bosh-stemcell-2839-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2690.6-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2719.1-aws-xen-centos-go_agent.tgz | | light-bosh-stemcell-2719.1-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2719.2-aws-xen-centos-go_agent.tgz | | light-bosh-stemcell-2719.2-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2719.3-aws-xen-ubuntu-trusty-go_agent.tgz | | light-bosh-stemcell-2839-aws-xen-hvm-centos-go_agent.tgz | | light-bosh-stemcell-2839-aws-xen-hvm-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2427-openstack-kvm-ubuntu.tgz | | bosh-stemcell-2624-openstack-kvm-centos.tgz | | bosh-stemcell-2624-openstack-kvm-ubuntu-lucid.tgz | | bosh-stemcell-2839-openstack-kvm-centos-go_agent.tgz | | bosh-stemcell-2839-openstack-kvm-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2652-openstack-kvm-ubuntu-lucid-go_agent.tgz | | bosh-stemcell-2719.1-openstack-kvm-centos-go_agent.tgz | | bosh-stemcell-2719.1-openstack-kvm-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.2-openstack-kvm-centos-go_agent.tgz | | bosh-stemcell-2719.2-openstack-kvm-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.3-openstack-kvm-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2839-openstack-kvm-centos-go_agent-raw.tgz | | bosh-stemcell-2839-openstack-kvm-ubuntu-trusty-go_agent-raw.tgz | | bosh-stemcell-2427-vcloud-esxi-ubuntu.tgz | | bosh-stemcell-2652-vcloud-esxi-ubuntu-lucid.tgz | | bosh-stemcell-2839-vcloud-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2690.5-vcloud-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2690.6-vcloud-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2710-vcloud-esxi-ubuntu-lucid-go_agent.tgz | | bosh-stemcell-2427-vsphere-esxi-ubuntu.tgz | | bosh-stemcell-2624-vsphere-esxi-centos.tgz | | bosh-stemcell-2839-vsphere-esxi-centos-go_agent.tgz | | bosh-stemcell-2427-vsphere-esxi-ubuntu-go_agent.tgz | | bosh-stemcell-2710-vsphere-esxi-ubuntu-lucid-go_agent.tgz | | bosh-stemcell-2624-vsphere-esxi-ubuntu-lucid.tgz | | bosh-stemcell-2839-vsphere-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.1-vsphere-esxi-centos-go_agent.tgz | | bosh-stemcell-2719.1-vsphere-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.2-vsphere-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2719.2-vsphere-esxi-centos-go_agent.tgz | | bosh-stemcell-2719.3-vsphere-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-2690.6-vsphere-esxi-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-389-warden-boshlite-ubuntu-trusty-go_agent.tgz | | bosh-stemcell-53-warden-boshlite-ubuntu.tgz | | bosh-stemcell-389-warden-boshlite-centos-go_agent.tgz | | bosh-stemcell-64-warden-boshlite-ubuntu-lucid-go_agent.tgz | +-----------------------------------------------------------------+$ bosh download public stemcell bosh-stemcell-2839-openstack-kvm-centos-go_agent-raw.tgz
bosh-stemcell: 4% |ooo | 24.4MB 753.0KB/s ETA: 00:11:43Now we are ready to create the MicroBOSH deployment manifestmicrobosh-openstack.yml file. You will need to change net_id with your OpenStack instance network identifier, ip with the ip address from the network pool. You can find out that information by executing the following commands.
$ nova network-list
+--------------------------------------+----------+----------------+
| ID | Label | Cidr | +--------------------------------------+----------+----------------+ | 3f36d40e-1097-49a0-a023-4606dbf3a1f5 | yuna-net | 192.168.1.0/24 | +--------------------------------------+----------+----------------+ $ nova network-show 3f36d40e-1097-49a0-a023-4606dbf3a1f5 +---------------------+--------------------------------------+ | Property | Value | +---------------------+--------------------------------------+ | bridge | xenbr0 | | bridge_interface | eth0 | | broadcast | 192.168.1.255 | | cidr | 192.168.1.0/24 | | cidr_v6 | - | | created_at | 2014-12-28T17:18:14.000000 | | deleted | False | | deleted_at | - | | dhcp_server | 192.168.1.50 | | dhcp_start | 192.168.1.51 | | dns1 | 8.8.4.4 | | dns2 | - | | enable_dhcp | True | | gateway | 192.168.1.50 | | gateway_v6 | - | | host | - | | id | 3f36d40e-1097-49a0-a023-4606dbf3a1f5 | | injected | False | | label | yuna-net | | mtu | - | | multi_host | True | | netmask | 255.255.255.0 | | netmask_v6 | - | | priority | - | | project_id | - | | rxtx_base | - | | share_address | True | | updated_at | - | | vlan | - | | vpn_private_address | - | | vpn_public_address | - | | vpn_public_port | - | +---------------------+--------------------------------------+Under the openstack section change the Identity service endpoint, OpenStack credentials, the private key location, and optionally set the timeout for OpenStack resources.
---
name: microbosh-openstack
logging: level: DEBUG network: type: manual ip: 192.168.1.55 cloud_properties: net_id: 3f36d40e-1097-49a0-a023-4606dbf3a1f5 resources: persistent_disk: 16384 cloud_properties: instance_type: m1.medium cloud: plugin: openstack properties: openstack: auth_url: http://controller:5000/v2.0 username: admin api_key: admin tenant: admin default_security_groups: ["bosh"] default_key_name: microbosh private_key: /root/microbosh.pem state_timeout: 900 apply_spec: properties: director: max_threads: 3 hm: resurrector_enabled: true ntp: - 0.europe.pool.ntp.org - 1.europe.pool.ntp.orgFinally, set the current deployment manifest file and deploy MicroBOSH.
$ bosh micro deployment microbosh-openstack.yml
$ bosh micro deploy bosh-stemcell-2839-openstack-kvm-centos-go_agent-raw.tgzIf everything goes well you should login into the MicroBOSH instance (use admin, for both username and password).
$ bosh target 192.168.1.55
Target set to 'microbosh-openstack'
Your username: admin Enter password: ***** Logged in as 'admin'Deploying Cloud Foundry
Start by cloning the Cloud Foundry repository. Enter the newly created cf-releasedirectory and execute the update script to update all submodules.
$ git clone https://github.com/cloudfoundry/cf-release.git
$ cd cf-release
$ ./updateUpload the stemcell to the BOSH Director.
$ bosh upload stemcell bosh-stemcell-2839-openstack-kvm-centos-go_agent-raw.tgzIn BOSH terminology, release is a collection of packages and source code, dependencies, configuration properties, and any other components required to perform a deployment. To create a Cloud Foundry release, use this command fromcf-release directory.
$ bosh create releaseThis will download the required blobs from the S3 storage service and generate a release tarball. You should end up with the similar directory structures.
$ ls blobs
buildpack_cache git haproxy mysql php-buildpack rootfs ruby-buildpack
cli go-buildpack java-buildpack nginx postgres ruby sqlite
debian_nfs_server golang libyaml nodejs-buildpack python-buildpack ruby-2.1.4 uaa
$ ls packages
acceptance-tests buildpack_python dea_next golang loggregator_trafficcontroller postgres warden
buildpack_cache buildpack_ruby debian_nfs_server golang1.3 login rootfs_lucid64
buildpack_go cli doppler gorouter metron_agent ruby
buildpack_java cloud_controller_ng etcd haproxy mysqlclient ruby-2.1.4
buildpack_java_offline collector etcd_metrics_server hm9000 nats smoke-tests
buildpack_nodejs common git libpq nginx sqlite
buildpack_php dea_logging_agent gnatsd libyaml nginx_newrelic_plugin uaaNow you can upload the release to the BOSH Director.
$ bosh upload releaseThe most complex part of Cloud Foundry BOSH deployment is the manifest file where all components are tied together - computing resource specifications, VMs, software releases, and configuration properties. You can use the deployment which worked great on my environment. Don’t forget to create cf.small and cf.medium flavors in OpenStack.
| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238 |