对于explain extended 查看执行计划里面的一些信息作为一个DBA还是必须掌握的。


参考博文:http://www.cnblogs.com/xuanzhi201111/p/4554769.html


环境: MySQL5.6.36

默认字符集: utf8

 

一、前置回顾:

1、数值型的字段长度

字段类型   长度    UNSIGNED          SIGNED有符号型           适用场合

tinyint:    1bytes   2^8-1 0-255           -128~127                    小整数值

smallint:   2bytes  2^16-1 0-65535         -32768~32767                大整数值

mediumint:  3bytes  2^24-1 0-16777215      -8388608~8388607            大整数值

int:        4bytes  2^32-1 0-4294967295    -2147483648-2147483647      大整数值(最大只能存10位数字)

bigint:     8bytes  2^64-1                                             大整数值

float       4bytes  单精度浮点型

double      8bytes  双精度浮点型

 

 

 

2、char和varchar型的字段长度

char和varchar是日常使用最多的字符类型。char(N)用于保存固定长度的字符串,长度最大为255,比指定长度大的值将被截短,而比指定长度小的值将会用空格进行填补。

varchar(N)用于保存可以变长的字符串,长度最大为65535,只存储字符串实际实际需要的长度(它会增加一个额外字节来存储字符串本身的长度),varchar使用额外的1~2字节来存储值的的长度,如果列的最大长度小于或者等于255,则用1字节,否则用2字节。

char和varchar跟字符编码也有密切的联系,latin1占用1个字节,gbk占用2个字节,utf8占用3个字节。(不同字符编码占用的存储空间不同)

 

3、日期&时间类型的字段长度

DataType  Storage Required Before MySQL 5.6.4    Storage    Requiredas of MySQL 5.6.4

YEAR                1byte                                  1byte

DATE                3bytes                                 3bytes

TIME                3bytes                                 3 bytes + fractional seconds storage

DATETIME            8bytes                                 5 bytes + fractional seconds storage

TIMESTAMP           4bytes                                 4 bytes + fractional seconds storage

 


 

二、创建测试用表:

> use test;

> CREATE TABLE `t1` (

  `a`int(11)  NULL,

 `aa` int(11) NOT NULL,

  `b`char(10)  NULL,

 `bb` char(10) NOT NULL,

  `c`varchar(20)  NULL,

 `cc` varchar(20) NOT NULL,

  `d`time  NULL,

 `dd` time NOT NULL,

  `e`timestamp NULL,

 `ee` timestamp NOT NULL,

  `f`datetime  NULL,

 `ff` datetime NOT NULL,

  KEY`index_a` (`a`),

  KEY`index_aa` (`aa`),

  KEY`index_b` (`b`),

  KEY`index_bb` (`bb`),

  KEY`index_c` (`c`),

  KEY`index_cc` (`cc`),

  KEY`index_d` (`d`),

  KEY`index_dd` (`dd`),

  KEY`index_e` (`e`),

  KEY`index_ee` (`ee`),

  KEY`index_f` (`f`),

  KEY`index_ff` (`ff`)

) ENGINE=InnoDB  CHARSET=utf8 ;

上面创建了一张奇怪的表,基本上覆盖了常见的字段类型了,每个字段都加了索引。

 

> insert into t1 values(1,11,'2','22','3','33','12:23:12','02:11:45','2017-02-12 01:00:12','2015-04-2121:09:12','2015-12-21 21:09:12','2021-04-21 01:45:56') ;

> insert into t1 values(12,131,'62','262','38','332','22:23:12','02:18:45','2017-12-1201:34:12','2005-04-21 21:09:12','2065-12-21 21:09:12','1949-10-01 01:45:56') ;

 

 

> explain extended select * from t1where a=12;

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_a       | index_a | 5       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

4(int占4bytes)+ 1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where aa=12;

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_aa      | index_aa | 4       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

4(int占4bytes)

 

 

> explain extended select * from t1where b='abc';

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_b       | index_b | 31      | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

10*3 (char每个字符在utf字符集下占3bytes)+ 1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where bb='stfdg4';

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_bb      | index_bb |30      | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

10*3 (char每个字符在utf字符集下占3bytes)

 

 

> explain extended select * from t1where c='hfdg';

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_c       | index_c | 63      | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

20*3(varchar每个字符在utf字符集下占3bytes) + 2 (2bytes用来记录varchar这种变长字符的长度) + 1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where cc='fgd';

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_cc      | index_cc | 62      | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

20*3(varchar每个字符在utf字符集下占3bytes) + 2 (2bytes用来记录varchar这种变长字符的长度)

 

 

> explain extended select * from t1where d='01:02:02';

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_d       | index_d | 4       | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-----------------------+

3 (time 类型占据3bytes) + 1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where dd='01:02:02';

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | index_dd      | index_dd |3       | const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-----------------------+

3 (time 类型占据3bytes)

 

 

> explain extended select * from t1where e='2017-02-11 01:02:02';

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_e       | index_e | 5       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

4 (timestamp 类型占据4bytes) + 1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where ee='2017-02-11 01:02:02';

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_ee      | index_ee | 4       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

4 (timestamp 类型占据4bytes)

 

 

> explain extended select * from t1where f='2017-02-11 01:02:02';

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key     | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_f       | index_f | 6       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+---------+---------+-------+------+----------+-------+

5 (datetime 类型占据5bytes) +  1 (1byte用来标记是否为null)

 

 

> explain extended select * from t1where ff='2017-02-11 01:02:02';

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

| id | select_type | table | type |possible_keys | key      | key_len |ref   | rows | filtered | Extra |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

|  1| SIMPLE      | t1    | ref | index_ff      | index_ff |5       | const |    1 |  100.00 | NULL  |

+----+-------------+-------+------+---------------+----------+---------+-------+------+----------+-------+

5 (datetime 类型占据5bytes)

 

 

联合索引的key_len的计算:

先去掉上面的2个单列索引,防止执行计划跑偏,然后加上一个联合索引:

alter table t1 drop index index_c;

alter table t1 drop index index_d;

alter table t1 add index c_d (c,d);

 

> explain extended select * from t1where c='aaa' and d='12:21:11';

+----+-------------+-------+------+---------------+------+---------+-------------+------+----------+-----------------------+

| id | select_type | table | type |possible_keys | key  | key_len | ref         | rows | filtered | Extra                 |

+----+-------------+-------+------+---------------+------+---------+-------------+------+----------+-----------------------+

|  1| SIMPLE      | t1    | ref | c_d           | c_d  | 67      | const,const |    1 |  100.00 | Using index condition |

+----+-------------+-------+------+---------------+------+---------+-------------+------+----------+-----------------------+

`c`列 varchar(20)DEFAULT NULL,

`d`列 timeDEFAULT NULL,

key_len = (20*3+2+1)+(3+1)= 67

 

 

 

 

总结1:

char和varchar类型key_len计算公式:

varchr(N)变长字段且允许NULL   =  N *( character set:utf8=3,gbk=2,latin1=1)+1(NULL)+2(变长字段)

varchr(N)变长字段且不允许NULL  =  N * ( character set:utf8=3,gbk=2,latin1=1)+2(变长字段)

 

char(N)固定字段且允许NULL     =  N* ( character set:utf8=3,gbk=2,latin1=1)+1(NULL)

char(N)固定字段且允许NULL     =  N* ( character set:utf8=3,gbk=2,latin1=1)

 

 

数值数据的key_len计算公式:

TINYINT允许NULL = 1 +1(NULL)

TINYINT不允许NULL = 1

 

SMALLINT允许为NULL =2+1(NULL)

SMALLINT不允许为NULL = 2

 

INT允许为NULL =4+1(NULL)

INT不允许为NULL = 4

 

BIGINT允许为NULL = 8+1(NULL)

BIGINT不允许为NULL = 8

 

 

日期时间型的key_len计算:(针对mysql5.5及之前版本

DATETIME允许为NULL=  8 + 1(NULL)

DATETIME不允许为NULL = 8

 

TIMESTAMP允许为NULL = 4+ 1(NULL)

TIMESTAMP不允许为NULL = 4

 

日期时间型的key_len计算:(针对mysql5.6.4及之后的版本

DATETIME允许为NULL=  5 + 1(NULL)

DATETIME不允许为NULL = 5

 

TIMESTAMP允许为NULL = 4+ 1(NULL)

TIMESTAMP不允许为NULL = 4

 

 

总结2:

1、从上面几个测试可以看出,假如我们建表时候使用varchar(20),varchar(255) 虽然实际存放的内容长度是一样的。但是这2种情况下索引占据的长度是不一样的。

MySQL建立索引时如果没有限制索引的大小,索引长度会默认采用的该字段的长度,

也就是说varchar(20)和varchar(255)对应的索引长度分别为20*3(utf-8)(+2+1),255*3(utf-8)(+2+1),

其中"+2"用来存储长度信息,“+1”用来标记是否为空。

加载索引信息时用varchar(255)类型会占用更多的内存。

 

2、另外,我们可以看到如果建表的时候,字段设置为DEFAULT NULL,会导致索引的长度增加1bytes,此外,NULL列会导致索引失效。

 

 

 

补充:

查看test库中的行数量、数据大小、索引大小等统计情况:

> SELECTCONCAT(table_schema,'.',table_name) AS 'Table Name',CONCAT(ROUND(table_rows/1000000,4),'M') AS 'Number of Rows',

    CONCAT(ROUND(data_length/(1024*1024*1024),4),'G')AS 'Data Size',

    CONCAT(ROUND(index_length/(1024*1024*1024),4),'G')AS 'Index Size',

    CONCAT(ROUND((data_length+index_length)/(1024*1024*1024),4),'G')AS'Total'

    FROMinformation_schema.TABLES

    WHEREtable_schema LIKE 'test';

 

+------------+----------------+-----------+------------+---------+

| Table Name | Number of Rows | Data Size |Index Size | Total   |

+------------+----------------+-----------+------------+---------+

| test.a    | 0.0164M        | 0.0015G   | 0.0020G   | 0.0034G |

| test.b    | 0.0165M        | 0.0015G   | 0.0000G   | 0.0015G |

| test.c    | 0.3594M        | 0.0210G   | 0.0000G   | 0.0210G |

+------------+----------------+-----------+------------+---------+

3 rows in set (0.00 sec)