部署keepalive+lvs

                                            　　　　　部署keepalive+lvs

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　作者：尹正杰

版权声明：原创作品，谢绝转载！否则将追究法律责任。  

 

 

 

 

欢迎加入：高级运维工程师之路 598432640

安装LVS的步骤我已经在另外的一遍文章详细介绍了它的特性，在这里我就话不多说直接干~

 

1.准备LVS环境.需要四台服务器

LVS服务器[DIP]： 172.30.1.60

LVS服务器[DIP]： 172.30.1.148

LAMP服务器[RIP]：172.30.1.152

LAMP服务器[RIP]：172.30.1.154

2.安装LVS【172.30.1.60和172.30.1.148都做相同的动作】

[root@yinzhengjie ~]# yum -y install kernel-devel

[root@yinzhengjie ~]# rpm -qa | grep kernel

[root@yinzhengjie ~]# ln -s /usr/src/kernels/2.6.32-431.el6.x86_64/ /usr/src/linux

[root@yinzhengjie ~]# ll /usr/src/

[root@yinzhengjie ~]# wget http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.26.tar.gz

[root@yinzhengjie ~]# yum -y install libnl* popt*

[root@yinzhengjie ~]# tar -xzf ipvsadm-1.26.tar.gz

[root@yinzhengjie ~]# cd ipvsadm-1.26

[root@yinzhengjie ipvsadm-1.26]# make && make install

[root@yinzhengjie ipvsadm-1.26]# ipvsadm

 

3.介绍Keepalive

keepalived服务的两大用途:

healthcheck:检查服务健康状态

failover：接管资源的能力（通过VRRP协议）

VRRP协议介绍：

全称Virtual Router Redundancy Protocol,中文名称虚拟路由器冗余协议，VRRPP的出现就是为了解决静态路由的单点故障，VRRP是通过一种竞选协议机制将路由任务交给某台VRRP路由器。

4.安装keepalive软件【172.30.1.60和172.30.1.148都需要安装】

[root@yinzhengjie tools]# ll /usr/src //检查是否做了链接文件，具体的可以参考我的LVS的配置过程

[root@yinzhengjie ~]# yum -y install openssl* //安装依赖包

[root@yinzhengjie ~]# wget http://www.keepalived.org/software/keepalived-1.1.19.tar.gz

//下载软件包

[root@yinzhengjie ~]# tar -zxf keepalived-1.1.19.tar.gz

[root@yinzhengjie ~]# cd keepalived-1.1.19

[root@yinzhengjie ~]# ./configure

上图表示编译成功，以第一个yes表示开启了ipvs功能【也就是支持LVS功能】，第二个yes是对ipcvs的同步支持，第三个yes是对vrrp的框架支持

[root@yinzhengjie keepalived-1.1.19]# make && make install

 

[root@yinzhengjie keepalived-1.1.19]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/ #生成启动脚本

[root@yinzhengjie keepalived-1.1.19]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/ #配置启动脚本的参数

[root@yinzhengjie keepalived-1.1.19]# mkdir -p /etc/keepalived #创建默认的keepalived配置文件路径

[root@yinzhengjie keepalived-1.1.19]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/ #将keepalived模板文件拷贝到新建的目录中去

[root@yinzhengjie keepalived-1.1.19]# cp /usr/local/sbin/keepalived /usr/bin/ #配置系统变量（这样当敲击keepalive的时候就不用打绝对路径了）

[root@yinzhengjie keepalived-1.1.19]# /etc/init.d/keepalived start #启动keepalive服务

Starting keepalived: [ OK ]

[root@yinzhengjie keepalived-1.1.19]# ps -ef | grep keepalive #检查进程是否启动成功

root 10638 1 0 08:52 ? 00:00:00 keepalived -D

root 10639 10638 0 08:52 ? 00:00:00 keepalived -D

root 10640 10638 0 08:52 ? 00:00:00 keepalived -D

root 10643 5869 0 08:53 pts/1 00:00:00 grep keepalive

[root@yinzhengjie keepalived-1.1.19]# /etc/init.d/keepalived stop #停止服务

Stopping keepalived: [ OK ]

[root@yinzhengjie keepalived-1.1.19]# ps -ef | grep keepalive #检查是否成功停止脚本

root 10652 5869 0 08:53 pts/1 00:00:00 grep keepalive

[root@yinzhengjie keepalived-1.1.19]#

 

5.配置keepalived文件

172.30.1.148的配置：

[root@yinzhengjie keepalived]# cp keepalived.conf keepalived.conf.`date +%F` //备份模板文件

 

[root@yinzhengjie keepalived]# more keepalived.conf //修改配置文件

! Configuration File for keepalived

global_defs {

notification_email {

y1053419035@qq.com //定义一个收件人邮箱;

}

notification_email_from yinzhengjie@thinktrader.net //定义一个发件人邮箱，用以发送邮件；

smtp_server exmail.qq.com //发邮件的服务器

smtp_connect_timeout 30 //设置链接超时时间;这是

router_id LVS_7

}

#上面是定义收发邮件的对象可以不定义，尽管他自己有监控的设置，我们可以通过zabbix来监控，配置起来更简单，至于下面的配置就是定义一个实例；

vrrp_instance VI_1 {

state MASTER //标识这台机器的状态，其实这个参数也就是一个空壳，真正起作用的是下面的 priority这个参数

interface eth0 //绑定IP地址的接口，提供服务的接口，下面的VIP（ virtual_ipaddress ）地址会默认绑定到这个接口上来的哟

virtual_router_id 55 //虚拟的路由ID(需要注意的是，在另外的一台服务器上这个参数必须一致【我测试用2台服务器高可用】，当然同一个配置文件[也就是这个配置文件]中的IP是不能一致的，也是就是不能冲突哟~因为他起到了唯一标识的作用！)

priority 150 //定义优先级，谁的数字大谁就是MASTER（官方建议2个服务器相差值是50），所以我们可以说上面的state就是一个空客，就好像主席和人名大会堂一样~你可以这么理解~哈哈！

advert_int 1 //间隔时间，超出1s如果对方没有反应它就接管~

authentication { //定义一个加密口令

auth_type PASS //认真密钥，建议用明文，不要用密文

auth_pass 6666 //这个参数自己自定义，建议不要改的太复杂，尤其是特殊字符

}

virtual_ipaddress {

172.30.1.200/24 //定义一个VIP

}

}

[root@yinzhengjie keepalived]# /etc/init.d/keepalived restart

Stopping keepalived: [ OK ]

Starting keepalived: [ OK ]

[root@yinzhengjie keepalived]#

 

172.30.1.60的配置：

[root@yinzhengjie ~]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/

[root@yinzhengjie ~]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/

[root@yinzhengjie ~]# mkdir -p /etc/keepalived

[root@yinzhengjie ~]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/

[root@yinzhengjie ~]# cp /usr/local/sbin/keepalived /usr/bin/

[root@yinzhengjie ~]# /etc/init.d/keepalived start

[root@yinzhengjie ~]# ps -ef | grep keepalive

root 4853 1 0 06:32 ? 00:00:00 keepalived -D

root 4855 4853 0 06:32 ? 00:00:00 keepalived -D

root 4856 4853 0 06:32 ? 00:00:00 keepalived -D

root 4871 2758 0 06:36 pts/0 00:00:00 grep keepalive

[root@yinzhengjie ~]# cd /etc/keepalived/

[root@yinzhengjie keepalived]# cp keepalived.conf keepalived.conf.`date +%F`

[root@yinzhengjie keepalived]# more keepalived.conf

! Configuration File for keepalived

global_defs {

notification_email {

1053419035@qq.com

}

notification_email_from yinzhengjie@thinktrader.net

smtp_server smtp.exmail.qq.com

smtp_connect_timeout 30

router_id LVS_2

}

vrrp_instance VI_1 {

state BACKUP

interface eth0

virtual_router_id 55

priority 100

advert_int 1

authentication {

auth_type PASS

auth_pass 6666

}

virtual_ipaddress {

172.30.1.200/24

}

}

[root@yinzhengjie keepalived]# /etc/init.d/keepalived restart

Stopping keepalived: [ OK ]

Starting keepalived: [ OK ]

[root@yinzhengjie keepalived]#

6.实验测试是否搭建成功：

172.30.1.148：

[root@yinzhengjie ~]# ip add | grep 1.200

 

172.30.1.60

说明服务还在master服务器上，这个时候我们停掉172.30.1.148的keepalive服务，检查VIP是否成功切换~

 

172.30.1.148：

172.30.1.60：

好了，通过这个实验，发现这个机器的确是接管成功VIP啦~那么你是否成功啦？这就是简单实现了web的高可用，

 

 

 

keepalive默认存放日志文件是在/var/log/message中，由于该文件是存放系统日志文件，不仅仅存放Keepalive的日志还存放着其他服务的日志。看起来不是很方便。所以我们可以将日志文件重新放到一个文件中。

 

1.修改keepalive配置文件

将原有的KEEPALIVED_OPTIONS="-D"前面加个”#“注释掉，然后重新加一行KEEPALIVED_OPTIONS="-D -d -S -0"，如下图

[root@yinzhengjie ~]# vim /etc/sysconfig/keepalived

2.编辑rsyslog配置文件，添加如下2行

[root@yinzhengjie ~]# tail -2 /etc/rsyslog.conf

#add keepalived log by yinzhengjie

local0.* /var/log/keepalived.log

[root@yinzhengjie ~]#

3.重启服务

[root@yinzhengjie ~]# /etc/init.d/rsyslog restart

[root@yinzhengjie ~]# /etc/init.d/keepalived restart