一次AP和WLC IOS相同时的 关联失败日志,貌似 AP断电后在重新关联都会出现这种问题

 

 
  
  1. Xmodem file system is available. 
  2. flashfs[0]: 9 files, 3 directories 
  3. flashfs[0]: 0 orphaned files, 0 orphaned directories 
  4. flashfs[0]: Total bytes: 15998976 
  5. flashfs[0]: Bytes used: 7524352 
  6. flashfs[0]: Bytes available: 8474624 
  7. flashfs[0]: flashfs fsck took 33 seconds. 
  8. Base ethernet MAC Address: XXXX 
  9. Initializing ethernet port 0... 
  10. Reset ethernet port 0... 
  11. Reset done! 
  12. ethernet link up, 100 mbps, full-duplex 
  13. Ethernet port 0 initialized: link is up 
  14. button pressed for 1 seconds 
  15. process_config_recovery: set IP address and config to default 10.0.0.1 
  16. Loading "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx"...################################################################################################################################################################################################################################################################# 
  17.  
  18. File "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000 
  19. executing... 
  20.  
  21.               Restricted Rights Legend 
  22.  
  23. Use, duplication, or disclosure by the Government is 
  24. subject to restrictions as set forth in subparagraph 
  25. (c) of the Commercial Computer Software - Restricted 
  26. Rights clause at FAR sec. 52.227-19 and subparagraph 
  27. (c) (1) (ii) of the Rights in Technical Data and Computer 
  28. Software clause at DFARS sec. 252.227-7013. 
  29.  
  30.            cisco Systems, Inc. 
  31.            170 West Tasman Drive 
  32.            San Jose, California 95134-1706 
  33.  
  34.  
  35.  
  36. Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) 
  37. Technical Support: http://www.cisco.com/techsupport 
  38. Copyright (c) 1986-2009 by Cisco Systems, Inc. 
  39. Compiled Mon 02-Nov-09 18:40 by prod_rel_team 
  40.  
  41.  
  42. Proceeding with system init 
  43.  
  44. Proceeding to unmask interrupts 
  45. Initializing flashfs... 
  46.  
  47. flashfs[1]: 9 files, 3 directories 
  48. flashfs[1]: 0 orphaned files, 0 orphaned directories 
  49. flashfs[1]: Total bytes: 15998976 
  50. flashfs[1]: Bytes used: 7524352 
  51. flashfs[1]: Bytes available: 8474624 
  52. flashfs[1]: flashfs fsck took 4 seconds. 
  53. flashfs[1]: Initialization complete....done Initializing flashfs. 
  54.  
  55. This product contains cryptographic features and is subject to United 
  56. States and local country laws governing import, export, transfer and 
  57. use. Delivery of Cisco cryptographic products does not imply 
  58. third-party authority to import, export, distribute or use encryption. 
  59. Importers, exporters, distributors and users are responsible for 
  60. compliance with U.S. and local country laws. By using this product you 
  61. agree to comply with applicable laws and regulations. If you are unable 
  62. to comply with U.S. and local laws, return this product immediately. 
  63.  
  64. A summary of U.S. laws governing Cisco cryptographic products may be found at
  65. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 
  66.  
  67. If you require further assistance please contact us by sending email to 
  68. export@cisco.com. 
  69.  
  70. cisco AIR-LAP1242AG-C-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. 
  71. Processor board ID FGL1453U071 
  72. PowerPCElvis CPU at 262Mhz, revision number 0x0950 
  73. Last reset from power-on 
  74. LWAPP p_w_picpath version 3.0.51.0 
  75. 1 FastEthernet interface 
  76.  
  77. 32K bytes of flash-simulated non-volatile configuration memory. 
  78. Base ethernet MAC Address: XXXX 
  79. Part Number                          : 73-10256-07 
  80. PCA Assembly Number                  : 800-26918-06 
  81. PCA Revision Number                  : A0 
  82. PCB Serial Number                    : FOC14493BLW 
  83. Top Assembly Part Number             : 800-29152-03 
  84. Top Assembly Serial Number           : FGL1453U071 
  85. Top Revision Number                  : A0 
  86. Product/Model Number                 : AIR-LAP1242AG-C-K9   
  87. % Please define a domain-name first
  88.  
  89.  
  90. Press RETURN to get started! 
  91.  
  92.  
  93. *Mar  1 00:00:05.942: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages) 
  94.  
  95. *Mar  1 00:00:08.018: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up 
  96. *Mar  1 00:00:08.068: %SYS-5-RESTART: System restarted -- 
  97. Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) 
  98. Technical Support: http://www.cisco.com/techsupport 
  99. Copyright (c) 1986-2009 by Cisco Systems, Inc. 
  100. Compiled Mon 02-Nov-09 18:40 by prod_rel_team 
  101. *Mar  1 00:00:08.145: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY 
  102. *Mar  1 00:00:08.654: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source 
  103. *Mar  1 00:00:09.018: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up 
  104. *Mar  1 00:00:16.412: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.16.200.43, mask 255.255.255.0, hostname AP 
  105.  
  106. *Mar  1 00:00:33.242: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established. 
  107. Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) 
  108. *Mar  1 00:00:37.968: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. 
  109.  
  110. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  111. *Mar  1 00:00:46.968: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  112.  
  113. *Mar  1 00:00:55.969: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  114. *Mar  1 00:01:05.970: %CAPWAP-3-ERRORLOG: Go join a capwap controller  
  115. *Mar  8 16:28:08.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246 
  116. *Mar  8 16:28:08.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  117. *Mar  8 16:28:09.548: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  118. *Mar  8 16:28:09.550: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  119. *Mar  8 16:28:09.550: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  120. examining p_w_picpath... 
  121. extracting info (295 bytes) 
  122. Image info: 
  123.     Version Suffix: k9w8-.124-21a.JHB1 
  124.     Image Name: c1240-k9w8-mx.124-21a.JHB1 
  125.     Version Directory: c1240-k9w8-mx.124-21a.JHB1 
  126.     Ios Image Size: 4813312 
  127.     Total Image Size: 4813312 
  128.     Image Feature: WIRELESS LAN|LWAPP 
  129.     Image Family: C1240 
  130.     Wireless Switch Management Version: 6.0.199.4 
  131. Extracting files... (这个时候失败了)
  132. c1240-k9w8-mx.124-21a.JHB1/ (directory) 0 (bytes) 
  133. extracting c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1 (4543348 bytes) 
  134. *Mar  8 16:28:14.549: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100perform archive download capwap:/c1240 tar file 
  135. *Mar  8 16:28:14.618: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE 
  136. *Mar  8 16:29:05.916: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  137. *Mar  8 16:29:05.916: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  138. *Mar  8 16:29:05.916: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  139. *Mar  8 16:29:05.916: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  140. *Mar  8 16:29:06.241: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  141. *Mar  8 16:29:06.241: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  142. *Mar  8 16:29:06.241: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  143. *Mar  8 16:29:06.241: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  144. *Mar  8 16:29:06.566: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  145. *Mar  8 16:31:27.371: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  146. *Mar  8 16:31:27.371: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  147. *Mar  8 16:31:27.372: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  148. *Mar  8 16:31:27.372: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  149. *Mar  8 16:31:27.696: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  150. *Mar  8 16:31:27.696: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  151. *Mar  8 16:31:27.696: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  152. *Mar  8 16:31:27.697: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  153. *Mar  8 16:31:28.022: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  154. *Mar  8 16:31:28.022: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  155. *Mar  8 16:31:28.023: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  156. *Mar  8 16:31:28.023: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  157. extracting c1240-k9w8-mx.124-21a.JHB1/6701.img (131328 bytes) 
  158. extracting c1240-k9w8-mx.124-21a.JHB1/info (295 bytes) 
  159. extracting info.ver (295 bytes) 
  160. Deleting target version: flash:/c1240-k9w8-mx.124-21a.JHB1...done. 
  161. New software p_w_picpath installed in flash:/c1240-k9w8-mx.124-21a.JHB1 
  162. Configuring system to use new p_w_picpath...done. 
  163. archive download: takes 282 seconds 
  164.  
  165. Writing out the event log to nvram... 
  166.  
  167. *Mar  8 16:32:56.535: p_w_picpath upgrade successfully, system is now reloading 
  168. *Mar  8 16:32:56.568: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295), size needed (29), error code (-1) 
  169. *Mar  8 16:32:56.569: %SYS-5-RELOAD: Reload requested by capwap p_w_picpath download proc. Reload Reason: NEW IMAGE DOWNLOAD. 
  170. *Mar  8 16:32:56.569: %LWAPP-5-CHANGED: CAPWAP changed state to DOWNXmodem file system is available. 
  171. flashfs[0]: 10 files, 3 directories 
  172. flashfs[0]: 0 orphaned files, 0 orphaned directories 
  173. flashfs[0]: Total bytes: 15998976 
  174. flashfs[0]: Bytes used: 7519232 
  175. flashfs[0]: Bytes available: 8479744 
  176. flashfs[0]: flashfs fsck took 32 seconds. 
  177. Base ethernet MAC Address: XXXX 
  178. Initializing ethernet port 0... 
  179. Reset ethernet port 0... 
  180. Reset done! 
  181. ethernet link up, 100 mbps, full-duplex 
  182. Ethernet port 0 initialized: link is up 
  183. Loading "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1"...######################################################################################################################################################################################################################################################################################################################################################################################################################################################################## 
  184.  
  185. File "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1" uncompressed and installed, entry point: 0x3000 
  186. executing... 
  187.  
  188.               Restricted Rights Legend 
  189.  
  190. Use, duplication, or disclosure by the Government is 
  191. subject to restrictions as set forth in subparagraph 
  192. (c) of the Commercial Computer Software - Restricted 
  193. Rights clause at FAR sec. 52.227-19 and subparagraph 
  194. (c) (1) (ii) of the Rights in Technical Data and Computer 
  195. Software clause at DFARS sec. 252.227-7013. 
  196.  
  197.            cisco Systems, Inc. 
  198.            170 West Tasman Drive 
  199.            San Jose, California 95134-1706 
  200.  
  201.  
  202.  
  203. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  204. Technical Support: http://www.cisco.com/techsupport 
  205. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  206. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  207.  
  208.  
  209. Proceeding with system init 
  210.  
  211. Proceeding to unmask interrupts 
  212. Initializing flashfs... 
  213.  
  214. flashfs[1]: 10 files, 3 directories 
  215. flashfs[1]: 0 orphaned files, 0 orphaned directories 
  216. flashfs[1]: Total bytes: 15482880 
  217. flashfs[1]: Bytes used: 7519232 
  218. flashfs[1]: Bytes available: 7963648 
  219. flashfs[1]: flashfs fsck took 7 seconds. 
  220. flashfs[1]: Initialization complete....done Initializing flashfs. 
  221.  
  222. Radio0  present A506 7100 E8000000 A0000000 80000000 3 
  223. Radio1  present A506 6700 E8000100 A0040000 80010000 2 
  224. This product contains cryptographic features and is subject to United 
  225. States and local country laws governing import, export, transfer and 
  226. use. Delivery of Cisco cryptographic products does not imply 
  227. third-party authority to import, export, distribute or use encryption. 
  228. Importers, exporters, distributors and users are responsible for 
  229. compliance with U.S. and local country laws. By using this product you 
  230. agree to comply with applicable laws and regulations. If you are unable 
  231. to comply with U.S. and local laws, return this product immediately. 
  232.  
  233. A summary of U.S. laws governing Cisco cryptographic products may be found at
  234. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 
  235.  
  236. If you require further assistance please contact us by sending email to 
  237. export@cisco.com. 
  238.  
  239. cisco AIR-LAP1242AG-C-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. 
  240. Processor board ID FGL1453U071 
  241. PowerPCElvis CPU at 262Mhz, revision number 0x0950 
  242. Last reset from power-on 
  243. LWAPP p_w_picpath version 6.0.199.4 
  244. 1 FastEthernet interface 
  245. 2 802.11 Radio(s) 
  246.  
  247. 32K bytes of flash-simulated non-volatile configuration memory. 
  248. Base ethernet MAC Address: XXXX 
  249. Part Number                          : 73-10256-07 
  250. PCA Assembly Number                  : 800-26918-06 
  251. PCA Revision Number                  : A0 
  252. PCB Serial Number                    : FOC14493BLW 
  253. Top Assembly Part Number             : 800-29152-03 
  254. Top Assembly Serial Number           : FGL1453U071 
  255. Top Revision Number                  : A0 
  256. Product/Model Number                 : AIR-LAP1242AG-C-K9   
  257. % Please define a domain-name first
  258.  
  259.  
  260. Press RETURN to get started! 
  261.  
  262.  
  263. *Mar  1 00:00:09.031: soap_prepare_new_p_w_picpath_crash: mini ios flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx 
  264. *Mar  1 00:00:09.033:  set boothlpr to mini ios 
  265. *Mar  1 00:00:09.374: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed 
  266. *Mar  1 00:00:10.984: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 
  267. *Mar  1 00:00:12.518: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 
  268. *Mar  1 00:00:12.630: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages) 
  269.  
  270. *Mar  1 00:00:14.762: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up 
  271. *Mar  1 00:00:14.803: %SYS-5-RESTART: System restarted -- 
  272. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  273. Technical Support: http://www.cisco.com/techsupport 
  274. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  275. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  276. *Mar  1 00:00:14.804: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start 
  277. *Mar  1 00:00:14.883: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY 
  278. *Mar  1 00:00:15.109: %SSH-5-ENABLED: SSH 2.0 has been enabled 
  279. *Mar  1 00:00:15.109: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  280. *Mar  1 00:00:15.109: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset 
  281. *Mar  1 00:00:15.494: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source 
  282. *Mar  1 00:00:15.771: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up 
  283. *Mar  1 00:00:15.917: %DOT11-6-FREQ_SCAN: Interface Dot11Radio1, Scanning frequencies for 22 seconds 
  284. *Mar  1 00:00:16.110: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down 
  285. *Mar  1 00:00:16.110: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down 
  286. *Mar  1 00:00:16.389: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  287. *Mar  1 00:00:17.389: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up 
  288. *Mar  1 00:00:25.233: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.16.200.44, mask 255.255.255.0, hostname AP 
  289.  
  290. *Mar  1 00:00:33.786: %DOT11-6-FREQ_SCAN: Interface Dot11Radio1, Scanning frequencies for 8 seconds 
  291. *Mar  1 00:00:33.787: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  292. *Mar  1 00:00:33.815: %LINK-3-UPDOWN: Interface Dot11Radio0, c 
  293. *Mar  1 00:00:34.492: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated 
  294. *Mar  1 00:00:41.572: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5785 selected 
  295. *Mar  1 00:00:41.573: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  296. *Mar  1 00:00:42.573: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up 
  297. Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) 
  298. *Mar  1 00:00:44.767: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. 
  299.  
  300. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  301. *Mar  1 00:00:53.768: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  302.  
  303. *Mar  1 00:01:02.769: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  304. *Mar  1 00:01:12.770: %CAPWAP-3-ERRORLOG: Go join a capwap controller  
  305. *Mar  8 16:35:21.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246 
  306. *Mar  8 16:35:21.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  307. *Mar  8 16:35:22.552: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  308. *Mar  8 16:35:22.554: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  309. *Mar  8 16:35:22.554: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  310. *Mar  8 16:35:27.553: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  311. *Mar  8 16:35:27.699: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG 
  312. *Mar  8 16:35:27.857: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  313. *Mar  8 16:35:27.871: %CAPWAP-5-CHANGED: CAPWAP changed state to UP 
  314. *Mar  8 16:35:27.872: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down 
  315. *Mar  8 16:35:27.872: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  316. *Mar  8 16:35:27.882: %LWAPP-3-CLIENTEVENTLOG: Received AP Syslog IP Address(255.255.255.255) configuration. 
  317. *Mar  8 16:35:28.013: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller WLCNAME 
  318. *Mar  8 16:35:28.068: %LWAPP-3-CLIENTEVENTLOG: SSID HNTZ1 added to the slot[0] 
  319. *Mar  8 16:35:28.071: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  320. *Mar  8 16:35:28.104: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  321. *Mar  8 16:35:28.872: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down 
高版本WLC换低版本WLC  6.0->5.2
 
 
  
  1. Xmodem file system is available. 
  2. flashfs[0]: 13 files, 4 directories 
  3. flashfs[0]: 0 orphaned files, 0 orphaned directories 
  4. flashfs[0]: Total bytes: 15998976 
  5. flashfs[0]: Bytes used: 12119040 
  6. flashfs[0]: Bytes available: 3879936 
  7. flashfs[0]: flashfs fsck took 43 seconds. 
  8. Base ethernet MAC Address: XXXX 
  9. Initializing ethernet port 0... 
  10. Reset ethernet port 0... 
  11. Reset done! 
  12. ethernet link up, 100 mbps, full-duplex 
  13. Ethernet port 0 initialized: link is up 
  14. button pressed for 2 seconds 
  15. process_config_recovery: set IP address and config to default 10.0.0.1 
  16. Loading "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx"...################################################################################################################################################################################################################################################################# 
  17.  
  18. File "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000 
  19. executing... 
  20.  
  21.               Restricted Rights Legend 
  22.  
  23. Use, duplication, or disclosure by the Government is 
  24. subject to restrictions as set forth in subparagraph 
  25. (c) of the Commercial Computer Software - Restricted 
  26. Rights clause at FAR sec. 52.227-19 and subparagraph 
  27. (c) (1) (ii) of the Rights in Technical Data and Computer 
  28. Software clause at DFARS sec. 252.227-7013. 
  29.  
  30.            cisco Systems, Inc. 
  31.            170 West Tasman Drive 
  32.            San Jose, California 95134-1706 
  33.  
  34.  
  35.  
  36. Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) 
  37. Technical Support: http://www.cisco.com/techsupport 
  38. Copyright (c) 1986-2009 by Cisco Systems, Inc. 
  39. Compiled Mon 02-Nov-09 18:40 by prod_rel_team 
  40.  
  41.  
  42. Proceeding with system init 
  43.  
  44. Proceeding to unmask interrupts 
  45. Initializing flashfs... 
  46.  
  47. flashfs[1]: 13 files, 4 directories 
  48. flashfs[1]: 0 orphaned files, 0 orphaned directories 
  49. flashfs[1]: Total bytes: 15998976 
  50. flashfs[1]: Bytes used: 12119040 
  51. flashfs[1]: Bytes available: 3879936 
  52. flashfs[1]: flashfs fsck took 6 seconds. 
  53. flashfs[1]: Initialization complete....done Initializing flashfs. 
  54.  
  55. This product contains cryptographic features and is subject to United 
  56. States and local country laws governing import, export, transfer and 
  57. use. Delivery of Cisco cryptographic products does not imply 
  58. third-party authority to import, export, distribute or use encryption. 
  59. Importers, exporters, distributors and users are responsible for 
  60. compliance with U.S. and local country laws. By using this product you 
  61. agree to comply with applicable laws and regulations. If you are unable 
  62. to comply with U.S. and local laws, return this product immediately. 
  63.  
  64. A summary of U.S. laws governing Cisco cryptographic products may be found at: 
  65. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 
  66.  
  67. If you require further assistance please contact us by sending email to 
  68. export@cisco.com. 
  69.  
  70. cisco AIR-LAP1242AG-C-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. 
  71. Processor board ID FGL1453U071 
  72. PowerPCElvis CPU at 262Mhz, revision number 0x0950 
  73. Last reset from power-on 
  74. LWAPP p_w_picpath version 3.0.51.0 
  75. 1 FastEthernet interface 
  76.  
  77. 32K bytes of flash-simulated non-volatile configuration memory. 
  78. Base ethernet MAC Address: XXXX 
  79. Part Number                          : 73-10256-07 
  80. PCA Assembly Number                  : 800-26918-06 
  81. PCA Revision Number                  : A0 
  82. PCB Serial Number                    : FOC14493BLW 
  83. Top Assembly Part Number             : 800-29152-03 
  84. Top Assembly Serial Number           : FGL1453U071 
  85. Top Revision Number                  : A0 
  86. Product/Model Number                 : AIR-LAP1242AG-C-K9   
  87. % Please define a domain-name first. 
  88.  
  89.  
  90. Press RETURN to get started! 
  91.  
  92.  
  93. *Mar  1 00:00:07.752: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages) 
  94.  
  95. *Mar  1 00:00:09.827: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up 
  96. *Mar  1 00:00:09.875: %SYS-5-RESTART: System restarted -- 
  97. Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) 
  98. Technical Support: http://www.cisco.com/techsupport 
  99. Copyright (c) 1986-2009 by Cisco Systems, Inc. 
  100. Compiled Mon 02-Nov-09 18:40 by prod_rel_team 
  101. *Mar  1 00:00:09.955: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY 
  102. *Mar  1 00:00:10.465: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source 
  103. *Mar  1 00:00:10.826: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up 
  104. *Mar  1 00:00:18.322: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.16.200.45, mask 255.255.255.0, hostname AP 
  105.  
  106. Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) 
  107. *Mar  1 00:00:39.778: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. 
  108.  
  109. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  110. *Mar  1 00:00:48.778: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  111.  
  112. *Mar  1 00:00:57.779: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  113. *Mar  1 00:01:07.780: %CAPWAP-3-ERRORLOG: Go join a capwap controller  
  114. *Mar  8 16:51:25.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246 
  115. *Mar  8 16:51:25.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  116. *Mar  8 16:51:26.550: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  117. *Mar  8 16:51:26.551: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  118. *Mar  8 16:51:26.552: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  119. examining p_w_picpath... 
  120. extracting info (295 bytes) 
  121. Image info: 
  122.     Version Suffix: k9w8-.124-21a.JHB1 
  123.     Image Name: c1240-k9w8-mx.124-21a.JHB1 
  124.     Version Directory: c1240-k9w8-mx.124-21a.JHB1 
  125.     Ios Image Size: 4813312 
  126.     Total Image Size: 4813312 
  127.     Image Feature: WIRELESS LAN|LWAPP 
  128.     Image Family: C1240 
  129.     Wireless Switch Management Version: 6.0.199.4 
  130. Not enough free space to download. 
  131. Check for crashinfo/radio coredump and non used p_w_picpath files... 
  132. Deleting flash:/c1240-k9w8-mx.124-18a.JA 
  133. *Mar  8 16:51:31.551: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100perform archive download capwap:/c1240 tar file done (free up 4594688 bytes) 
  134. Extracting files... 
  135. c1240-k9w8-mx.124-21a.JHB1/ (directory) 0 (bytes) 
  136. extracting c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1 (4543348 bytes) 
  137. *Mar  8 16:51:31.621: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE(这时亮蓝灯闪烁)  
  138. *Mar  8 16:53:50.124: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  139. *Mar  8 16:53:50.124: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  140. *Mar  8 16:53:50.124: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  141. *Mar  8 16:53:50.124: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  142. *Mar  8 16:53:50.427: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  143. *Mar  8 16:53:50.427: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  144. *Mar  8 16:53:50.428: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  145. *Mar  8 16:53:50.428: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  146. *Mar  8 16:53:50.751: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  147. *Mar  8 16:56:11.956: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  148. *Mar  8 16:56:11.956: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  149. *Mar  8 16:56:11.957: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  150. *Mar  8 16:56:11.957: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  151. *Mar  8 16:56:12.281: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  152. *Mar  8 16:56:12.282: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 34078720. 
  153. *Mar  8 16:56:12.282: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller 
  154. *Mar  8 16:56:12.282: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.61.100 
  155. *Mar  8 16:56:12.609: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 172.16.61.100 
  156. extracting c1240-k9w8-mx.124-21a.JHB1/6701.img (131328 bytes) 
  157. extracting c1240-k9w8-mx.124-21a.JHB1/info (295 bytes) 
  158. extracting info.ver (295 bytes) 
  159. Deleting target version: flash:/c1240-k9w8-mx.124-21a.JHB1...done. 
  160. New software p_w_picpath installed in flash:/c1240-k9w8-mx.124-21a.JHB1 
  161. Configuring system to use new p_w_picpath...done. 
  162. archive download: takes 294 seconds 
  163.  
  164. Writing out the event log to nvram... 
  165.  
  166. *Mar  8 16:56:25.329: p_w_picpath upgrade successfully, system is now reloading 
  167. *Mar  8 16:56:25.363: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295), size needed (29), error code (-1) 
  168. *Mar  8 16:56:25.363: %SYS-5-RELOAD: Reload requested by capwap p_w_picpath download proc. Reload Reason: NEW IMAGE DOWNLOAD. 
  169. *Mar  8 16:56:25.364: %LWAPP-5-CHANGED: CAPWAP changed state to DOWNXmodem file system is available. 
  170. flashfs[0]: 10 files, 3 directories 
  171. flashfs[0]: 0 orphaned files, 0 orphaned directories 
  172. flashfs[0]: Total bytes: 15998976 
  173. flashfs[0]: Bytes used: 7519744 
  174. flashfs[0]: Bytes available: 8479232 
  175. flashfs[0]: flashfs fsck took 32 seconds. 
  176. Base ethernet MAC Address: XXXX 
  177. Initializing ethernet port 0... 
  178. Reset ethernet port 0... 
  179. Reset done! 
  180. ethernet link up, 100 mbps, full-duplex 
  181. Ethernet port 0 initialized: link is up 
  182. Loading "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1"...######################################################################################################################################################################################################################################################################################################################################################################################################################################################################## 
  183.  
  184. File "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1" uncompressed and installed, entry point: 0x3000 
  185. executing... 
  186.  
  187.               Restricted Rights Legend 
  188.  
  189. Use, duplication, or disclosure by the Government is 
  190. subject to restrictions as set forth in subparagraph 
  191. (c) of the Commercial Computer Software - Restricted 
  192. Rights clause at FAR sec. 52.227-19 and subparagraph 
  193. (c) (1) (ii) of the Rights in Technical Data and Computer 
  194. Software clause at DFARS sec. 252.227-7013. 
  195.  
  196.            cisco Systems, Inc. 
  197.            170 West Tasman Drive 
  198.            San Jose, California 95134-1706 
  199.  
  200.  
  201.  
  202. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  203. Technical Support: http://www.cisco.com/techsupport 
  204. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  205. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  206.  
  207.  
  208. Proceeding with system init 
  209.  
  210. Proceeding to unmask interrupts 
  211. Initializing flashfs... 
  212.  
  213. flashfs[1]: 10 files, 3 directories 
  214. flashfs[1]: 0 orphaned files, 0 orphaned directories 
  215. flashfs[1]: Total bytes: 15482880 
  216. flashfs[1]: Bytes used: 7519744 
  217. flashfs[1]: Bytes available: 7963136 
  218. flashfs[1]: flashfs fsck took 7 seconds. 
  219. flashfs[1]: Initialization complete....done Initializing flashfs. 
  220.  
  221. Radio0  present A506 7100 E8000000 A0000000 80000000 3 
  222. Radio1  present A506 6700 E8000100 A0040000 80010000 2 
  223. This product contains cryptographic features and is subject to United 
  224. States and local country laws governing import, export, transfer and 
  225. use. Delivery of Cisco cryptographic products does not imply 
  226. third-party authority to import, export, distribute or use encryption. 
  227. Importers, exporters, distributors and users are responsible for 
  228. compliance with U.S. and local country laws. By using this product you 
  229. agree to comply with applicable laws and regulations. If you are unable 
  230. to comply with U.S. and local laws, return this product immediately. 
  231.  
  232. A summary of U.S. laws governing Cisco cryptographic products may be found at: 
  233. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 
  234.  
  235. If you require further assistance please contact us by sending email to 
  236. export@cisco.com. 
  237.  
  238. cisco AIR-LAP1242AG-C-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. 
  239. Processor board ID FGL1453U071 
  240. PowerPCElvis CPU at 262Mhz, revision number 0x0950 
  241. Last reset from power-on 
  242. LWAPP p_w_picpath version 6.0.199.4 
  243. 1 FastEthernet interface 
  244. 2 802.11 Radio(s) 
  245.  
  246. 32K bytes of flash-simulated non-volatile configuration memory. 
  247. Base ethernet MAC Address: XXXX 
  248. Part Number                          : 73-10256-07 
  249. PCA Assembly Number                  : 800-26918-06 
  250. PCA Revision Number                  : A0 
  251. PCB Serial Number                    : FOC14493BLW 
  252. Top Assembly Part Number             : 800-29152-03 
  253. Top Assembly Serial Number           : FGL1453U071 
  254. Top Revision Number                  : A0 
  255. Product/Model Number                 : AIR-LAP1242AG-C-K9   
  256. % Please define a domain-name first. 
  257.  
  258.  
  259. Press RETURN to get started! 
  260.  
  261.  
  262. *Mar  1 00:00:09.081: soap_prepare_new_p_w_picpath_crash: mini ios flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx 
  263. *Mar  1 00:00:09.083:  set boothlpr to mini ios 
  264. *Mar  1 00:00:09.427: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed 
  265. *Mar  1 00:00:11.037: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 
  266. *Mar  1 00:00:12.571: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 
  267. *Mar  1 00:00:12.682: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages) 
  268.  
  269. *Mar  1 00:00:14.815: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up 
  270. *Mar  1 00:00:14.856: %SYS-5-RESTART: System restarted -- 
  271. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  272. Technical Support: http://www.cisco.com/techsupport 
  273. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  274. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  275. *Mar  1 00:00:14.857: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start 
  276. *Mar  1 00:00:14.936: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY 
  277. *Mar  1 00:00:15.162: %SSH-5-ENABLED: SSH 2.0 has been enabled 
  278. *Mar  1 00:00:15.162: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  279. *Mar  1 00:00:15.162: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset 
  280. *Mar  1 00:00:15.546: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source 
  281. *Mar  1 00:00:15.815: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up 
  282. *Mar  1 00:00:15.937: %DOT11-6-FREQ_SCAN: Interface Dot11Radio1, Scanning frequencies for 17 seconds 
  283. *Mar  1 00:00:16.170: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down 
  284. *Mar  1 00:00:16.170: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down 
  285. *Mar  1 00:00:16.422: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  286. *Mar  1 00:00:17.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up 
  287. *Mar  1 00:00:25.286: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.16.200.46, mask 255.255.255.0, hostname AP 
  288.  
  289. *Mar  1 00:00:33.414: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5765 selected 
  290. *Mar  1 00:00:33.415: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  291. *Mar  1 00:00:33.817: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset 
  292. *Mar  1 00:00:33.845: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  293. *Mar  1 00:00:33.845: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  294. *Mar  1 00:00:33.875: %LINK-3-UPDOWN: Interface Dot11Radio0, c 
  295. *Mar  1 00:00:34.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up 
  296. Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) 
  297. *Mar  1 00:00:44.818: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. 
  298.  
  299. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  300. *Mar  1 00:00:53.819: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  301.  
  302. *Mar  1 00:01:02.820: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  303. *Mar  1 00:01:12.821: %CAPWAP-3-ERRORLOG: Go join a capwap controller  
  304. *Mar  8 16:58:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246  (粉 黄绿 互闪) 
  305. *Mar  8 16:58:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  306. *Mar  8 16:58:50.552: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  307. *Mar  8 16:58:50.554: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  308. *Mar  8 16:58:50.554: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  309. *Mar  8 16:58:55.553: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  310. *Mar  8 16:58:55.698: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG 
  311. *Mar  8 16:58:55.856: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  312. *Mar  8 16:58:55.870: %CAPWAP-5-CHANGED: CAPWAP changed state to UP 
  313. *Mar  8 16:58:55.871: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down 
  314. *Mar  8 16:58:55.871: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  315. *Mar  8 16:58:55.881: %LWAPP-3-CLIENTEVENTLOG: Received AP Syslog IP Address(255.255.255.255) configuration. 
  316. *Mar  8 16:58:56.015: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller WLCNAME 
  317. *Mar  8 16:58:56.069: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[0] 
  318. *Mar  8 16:58:56.072: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  319. *Mar  8 16:58:56.105: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  320. *Mar  8 16:58:56.870: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down 

AP切换H-HEAP模式

 

 
  
  1. Writing out the event log to nvram... 
  2.  
  3. *Mar  8 16:59:45.234: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: Recvd RESET req from Controller. 
  4. *Mar  8 16:59:45.238: %LWAPP-5-CHANGED: CAPWAP changed state to DOWNXmodem file system is available. 
  5. flashfs[0]: 10 files, 3 directories 
  6. flashfs[0]: 0 orphaned files, 0 orphaned directories 
  7. flashfs[0]: Total bytes: 15998976 
  8. flashfs[0]: Bytes used: 7524864 
  9. flashfs[0]: Bytes available: 8474112 
  10. flashfs[0]: flashfs fsck took 32 seconds. 
  11. Base ethernet MAC Address: XXXX 
  12. Initializing ethernet port 0... 
  13. Reset ethernet port 0... 
  14. Reset done! 
  15. ethernet link up, 100 mbps, full-duplex 
  16. Ethernet port 0 initialized: link is up 
  17. Loading "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1"...######################################################################################################################################################################################################################################################################################################################################################################################################################################################################## 
  18.  
  19. File "flash:/c1240-k9w8-mx.124-21a.JHB1/c1240-k9w8-mx.124-21a.JHB1" uncompressed and installed, entry point: 0x3000 
  20. executing... 
  21.  
  22.               Restricted Rights Legend 
  23.  
  24. Use, duplication, or disclosure by the Government is 
  25. subject to restrictions as set forth in subparagraph 
  26. (c) of the Commercial Computer Software - Restricted 
  27. Rights clause at FAR sec. 52.227-19 and subparagraph 
  28. (c) (1) (ii) of the Rights in Technical Data and Computer 
  29. Software clause at DFARS sec. 252.227-7013. 
  30.  
  31.            cisco Systems, Inc. 
  32.            170 West Tasman Drive 
  33.            San Jose, California 95134-1706 
  34.  
  35.  
  36.  
  37. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  38. Technical Support: http://www.cisco.com/techsupport 
  39. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  40. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  41.  
  42.  
  43. Proceeding with system init 
  44.  
  45. Proceeding to unmask interrupts 
  46. Initializing flashfs... 
  47.  
  48. flashfs[1]: 10 files, 3 directories 
  49. flashfs[1]: 0 orphaned files, 0 orphaned directories 
  50. flashfs[1]: Total bytes: 15482880 
  51. flashfs[1]: Bytes used: 7524864 
  52. flashfs[1]: Bytes available: 7958016 
  53. flashfs[1]: flashfs fsck took 4 seconds. 
  54. flashfs[1]: Initialization complete....done Initializing flashfs. 
  55.  
  56. Radio0  present A506 7100 E8000000 A0000000 80000000 3 
  57. Radio1  present A506 6700 E8000100 A0040000 80010000 2 
  58. This product contains cryptographic features and is subject to United 
  59. States and local country laws governing import, export, transfer and 
  60. use. Delivery of Cisco cryptographic products does not imply 
  61. third-party authority to import, export, distribute or use encryption. 
  62. Importers, exporters, distributors and users are responsible for 
  63. compliance with U.S. and local country laws. By using this product you 
  64. agree to comply with applicable laws and regulations. If you are unable 
  65. to comply with U.S. and local laws, return this product immediately. 
  66.  
  67. A summary of U.S. laws governing Cisco cryptographic products may be found at: 
  68. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 
  69.  
  70. If you require further assistance please contact us by sending email to 
  71. export@cisco.com. 
  72.  
  73. cisco AIR-LAP1242AG-C-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. 
  74. Processor board ID FGL1453U071 
  75. PowerPCElvis CPU at 262Mhz, revision number 0x0950 
  76. Last reset from power-on 
  77. LWAPP p_w_picpath version 6.0.199.4 
  78. 1 FastEthernet interface 
  79. 2 802.11 Radio(s) 
  80.  
  81. 32K bytes of flash-simulated non-volatile configuration memory. 
  82. Base ethernet MAC Address: XXXX 
  83. Part Number                          : 73-10256-07 
  84. PCA Assembly Number                  : 800-26918-06 
  85. PCA Revision Number                  : A0 
  86. PCB Serial Number                    : FOC14493BLW 
  87. Top Assembly Part Number             : 800-29152-03 
  88. Top Assembly Serial Number           : FGL1453U071 
  89. Top Revision Number                  : A0 
  90. Product/Model Number                 : AIR-LAP1242AG-C-K9   
  91. % Please define a domain-name first. 
  92.  
  93.  
  94. Press RETURN to get started! 
  95.  
  96.  
  97. *Mar  1 00:00:06.315: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS ged state to up 
  98. *Mar  1 00:00:11.391: %SYS-5-RESTART: System restarted -- 
  99. Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1) 
  100. Technical Support: http://www.cisco.com/techsupport 
  101. Copyright (c) 1986-2010 by Cisco Systems, Inc. 
  102. Compiled Wed 11-Aug-10 15:55 by prod_rel_team 
  103. *Mar  1 00:00:11.392: %SNMP-5-COLDSTART: SNMP agent on host AP is undergoing a cold start 
  104. *Mar  1 00:00:11.469: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY 
  105. *Mar  1 00:00:11.694: %SSH-5-ENABLED: SSH 2.0 has been enabled 
  106. *Mar  1 00:00:11.694: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  107. *Mar  1 00:00:11.694: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  108. *Mar  1 00:00:11.932: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset 
  109. *Mar  1 00:00:11.932: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  110. *Mar  1 00:00:12.078: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source 
  111. *Mar  1 00:00:12.334: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up 
  112. *Mar  1 00:00:12.518: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  113. *Mar  1 00:00:12.698: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down 
  114. *Mar  1 00:00:12.698: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up 
  115. *Mar  1 00:00:12.950: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  116. *Mar  1 00:00:13.960: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up 
  117. *Mar  1 00:00:21.818: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.16.200.47, mask 255.255.255.0, hostname AP 
  118.  
  119. *Mar  1 00:00:30.292: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset 
  120. *Mar  1 00:00:30.319: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up 
  121. *Mar  1 00:00:30.319: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  122. *Mar  1 00:00:30.349: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  123. *Mar  1 00:00:30.985: Logging LWAPP message to 255.255.255.255. 
  124.  
  125. *Mar  1 00:00:31.034: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated 
  126. Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) 
  127. *Mar  1 00:00:42.032: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. 
  128.  
  129. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  130. *Mar  1 00:00:51.034: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  131.  
  132. *Mar  1 00:01:00.035: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  133. *Mar  1 00:01:10.037: %CAPWAP-3-ERRORLOG: Go join a capwap controller  
  134. *Mar  8 17:02:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246 
  135. *Mar  8 17:02:07.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  136. *Mar  8 17:02:08.559: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  137. *Mar  8 17:02:08.560: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  138. *Mar  8 17:02:08.560: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  139. *Mar  8 17:02:13.559: %CAPWAP-5-SENDJOIN: sending Join RequestEVENTLOG: OfficeExtend Localssid saved in AP flash 
  140. *Mar  8 17:02:13.894: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down 
  141. *Mar  8 17:02:13.894: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  142. *Mar  8 17:02:14.251: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down 
  143. *Mar  8 17:02:14.253: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[0] 
  144. *Mar  8 17:02:14.397: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[1] 
  145. *Mar  8 17:02:14.430: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  146. *Mar  8 17:02:14.464: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  147. *Mar  8 17:02:14.467: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  148. *Mar  8 17:02:14.499: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  149. *Mar  8 17:02:14.894: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down 
  150. *Mar  8 17:02:15.158: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[1] 
  151. *Mar  8 17:02:15.490: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down 
  152. *Mar  8 17:02:15.492: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  153. *Mar  8 17:02:15.525: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  154. *Mar  8 17:02:15.809: %WIDS-6-ENABLED: IDS Signature is loaded and enabled 

AP切换AP GROUP日志

 
  
  1. Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) 
  2. *Mar  1 00:00:50.400: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER 
  3.   
  4. *Mar  1 00:00:59.401: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER 
  5. *Mar  1 00:01:09.403: %CAPWAP-3-ERRORLOG: Go join a capwap con 
  6. *Mar  8 15:47:09.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.61.100 peer_port: 5246 
  7. *Mar  8 15:47:09.001: %CAPWAP-5-CHANGED: CAPWAP changed state to   
  8. *Mar  8 15:47:10.566: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.61.100 peer_port: 5246 
  9. *Mar  8 15:47:10.567: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  10. *Mar  8 15:47:10.568: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN 
  11. *Mar  8 15:47:15.567: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.61.100 
  12. *Mar  8 15:47:15.722: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG 
  13. *Mar  8 15:47:15.881: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset 
  14. *Mar  8 15:47:15.895: %CAPWAP-5-CHANGED: CAPWAP changed state to UP 
  15. *Mar  8 15:47:15.902: %LWAPP-3-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash 
  16. *Mar  8 15:47:15.915: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down 
  17. *Mar  8 15:47:15.915: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up 
  18. *Mar  8 15:47:16.063: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller wlcname 
  19. *Mar  8 15:47:16.112: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[0] 
  20. *Mar  8 15:47:16.282: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down 
  21. *Mar  8 15:47:16.284: %LWAPP-3-CLIENTEVENTLOG: SSID (名字) added to the slot[1] 
  22. *Mar  8 15:47:16.912: %WIDS-6-ENABLED: IDS Signature is loaded and enabled 
  23. *Mar  8 15:47:16.914: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down