Authentication to the Kubernetes API Server
A number of components are involved in the authentication process and the first step is to narrow down the source of the problem, namely whether it is a problem with user authentication or with service authentication. Both authentications must work:
+-------------+ user +-------------+ service +-------------+
| | authentication | | authentication | |
| browser +------------------->+ apiserver +<-------------------+ dashboard |
| | | | | |
+-------------+ +-------------+ +-------------+
User authentication
From your workstation you can connect to Dashboard in three different ways:
-
Authentication through kubectl: This is recommended, because it is secure and easy. In your desktop environment (e.g. laptop) verify that kubectl is configured properly with
kubectl cluster-info. If you get a response then you can continue. Enter the commandkubectl proxy. kubectl will relay the user's credentials to apiserver for authentication and proxy every API request to a local server. This server is unprotected, but this is not a problem as it is only accessible from within the workstation. Now access Dashboard withhttp://localhost:8001/ui. If it fails then your problem is located with service authentication (see next section). -
Direct access to apiserver: Open a browser with the URL
https://<master>/. A login dialog should pop up. If it does not, then username & password authentication is not configured for the apiserver. See documentation if you want to configure it manually. Next, access Dashboard withhttps://<master>/ui. If it fails then your problem is located with service authentication (see next section). -
Bypass apiserver: If you are working in a trusted environment then you may access Dashboard without authentication. Expose Dashboard service via NodePort. See user guide for details.
Service authentication
Dashboard needs information from apiserver. Therefore, authentication is required, which can be achieved in two different ways:
-
Service Account: This is recommended, because nothing has to be configured. Dashboard will use information provided by the system to communicate with the API server. See 'Service Account' section for details.
-
Kubeconfig file: In some Kubernetes environments service accounts are not available. In this case a manual configuration is required. The Dashboard binary can be started with the
--kubeconfigflag. The value of the flag is a path to a file specifying how to connect to the API server. The contents of the file is identical to~/.kube/configwhich is used by kubectl to connect to the API server. See 'kubeconfig' section for details.
In the diagram below you can see the full authentication flow with all options, starting with the browser on the lower left hand side.
Workstation Kubernetes
+------------------+ +----------------------------------------------------+
| | | |
| | | |
| +------------+ | | +------------+ apiserver +------------+ |
| | | | authentication with kubectl | | | proxy | | |
| | kubectl +------------------------------------>+ apiserver +------------------->+ dashboard | |
| | proxy | | | | | | | |
| | | | | | | | | |
| +--------+---+ | | | | | | |
| ^ | +------>+ | service account/ | | |
| localhost| | | | | | kubeconfig | | |
| | | | | | +<-------------------+ | |
| +--------+---+ | | | | | | | |
| | | | direct access | | +------------+ +------+-----+ |
| | browser +-----------------------------+ | | |
| | | | | | |
| | +----------------------------------------------------------------------------->O |
| +------------+ | bypass apiserver | NodePort |
| | | |
| | | |
+------------------+ +----------------------------------------------------+
Service Account
If using a service account to connect to the API server, Dashboard expects the file/var/run/secrets/kubernetes.io/serviceaccount/token to be present. It provides a secret token that is required to authenticate with the API server.
Verify with the following commands:
# start a container that contains curl
$ kubectl run test --image=tutum/curl -- sleep 10000
# check that container is running
$ kubectl get pods
NAME READY STATUS RESTARTS AGE
test-701078429-s5kca 1/1 Running 0 16s
# check if secret exists
$ kubectl exec test-701078429-s5kca ls /var/run/secrets/kubernetes.io/serviceaccount/
ca.crt
namespace
token
# get service IP of master
$ kubectl get services
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes 10.0.0.1 <none> 443/TCP 1d
# check base connectivity from cluster inside
$ kubectl exec test-701078429-s5kca -- curl -k https://10.0.0.1
Unauthorized
# connect using tokens
$ TOKEN_VALUE=$(kubectl exec test-701078429-s5kca -- cat /var/run/secrets/kubernetes.io/serviceaccount/token)
$ echo $TOKEN_VALUE
eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3Mi....9A
$ kubectl exec test-701078429-s5kca -- curl --cacert /var/run/secrets/kubernetes.io/serviceaccount/ca.crt -H "Authorization: Bearer $TOKEN_VALUE" https://10.0.0.1
{
"paths": [
"/api",
"/api/v1",
"/apis",
"/apis/apps",
"/apis/apps/v1alpha1",
"/apis/authentication.k8s.io",
"/apis/authentication.k8s.io/v1beta1",
"/apis/authorization.k8s.io",
"/apis/authorization.k8s.io/v1beta1",
"/apis/autoscaling",
"/apis/autoscaling/v1",
"/apis/batch",
"/apis/batch/v1",
"/apis/batch/v2alpha1",
"/apis/certificates.k8s.io",
"/apis/certificates.k8s.io/v1alpha1",
"/apis/extensions",
"/apis/extensions/v1beta1",
"/apis/policy",
"/apis/policy/v1alpha1",
"/apis/rbac.authorization.k8s.io",
"/apis/rbac.authorization.k8s.io/v1alpha1",
"/apis/storage.k8s.io",
"/apis/storage.k8s.io/v1beta1",
"/healthz",
"/healthz/ping",
"/logs",
"/metrics",
"/swaggerapi/",
"/ui/",
"/version"
]
}If it is not working, there are two possible reasons:
-
The contents of the tokens is invalid. Find the secret name with
kubectl get secrets | grep service-accountand delete it withkubectl delete secret <name>. It will automatically be recreated. -
You have a non-standard Kubernetes installation and the file containing the token may not be present. The API server will mount a volume containing this file, but only if the API server is configured to use the ServiceAccount admission controller. If you experience this error, verify that your API server is using the ServiceAccount admission controller. If you are configuring the API server by hand, you can set this with the
--admission-controlparameter. Please note that you should use other admission controllers as well. Before configuring this option, you should read about admission controllers.
More information:
kubeconfig
If you want to use a kubeconfig file for authentication, create a deployment file similar to the one below:
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
labels:
app: kubernetes-dashboard
name: kubernetes-dashboard
namespace: kube-system
spec:
replicas: 1
selector:
matchLabels:
app: kubernetes-dashboard
template:
metadata:
labels:
app: kubernetes-dashboard
spec:
containers:
- name: kubernetes-dashboard
image: gcr.io/google_containers/kubernetes-dashboard-amd64:v1.x.x
imagePullPolicy: Always
ports:
- containerPort: 9090
protocol: TCP
volumeMounts:
- name: "kubeconfig"
mountPath: "/etc/kubernetes/"
readOnly: true
args:
- --kubeconfig=/etc/kubernetes/kubeconfig.yaml
livenessProbe:
httpGet:
path: /
port: 9090
initialDelaySeconds: 30
timeoutSeconds: 30
volumes:
- name: "kubeconfig"
hostPath:
path: "/etc/kubernetes/"
---
kind: Service
apiVersion: v1
metadata:
labels:
app: kubernetes-dashboard
name: kubernetes-dashboard
namespace: kube-system
spec:
type: NodePort
ports:
- port: 80
targetPort: 9090
selector:
app: kubernetes-dashboar
Cont Privacy
Security
Status
Help
https://github.com/kubernetes/dashboard/blob/master/docs/user-guide/troubleshooting.md
扫一扫
296
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
