Centos&Redhat下bcm43142博通无线网卡linux驱动之二

上次通过更换内核实现成功编译驱动无线网卡,但是启动到系统原内核下依然没有bcm43142的驱动,遂准备在原内核下编译驱动,记录一下

ps:更推荐这种方法,避免因更换内核出现其他兼容性问题

1.准备驱动包

hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
点我下载 密cmet
下载拷贝进u盘,将源码包拷贝至/usr

2.安装工具

安装gccyum install -y gcc,如已安装可跳过
安装内核对应版本的kernel-headers,kerner-devel,本次使用当前系统镜像作为yum源,所以版本也是一致的

 [root@king ~]# yum list|grep kernel
 kernel.x86_64                           3.10.0-327.el7             @anaconda/7.2
 kernel-devel.x86_64                     3.10.0-327.el7             @rhel7.2_iso 
 kernel-headers.x86_64                   3.10.0-327.el7             @rhel7.2_iso 
3.编译源码与安装驱动

复制源码包并解压

 [root@king ~]# mkdir -p /usr/local/other/wireless7_2
 [root@king ~]# cp /usr/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz /usr/local/other/wireless7_2
 [root@king ~]# cd /usr/local/other/wireless7_2
 [root@king wireless7_2]# tar zxf hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
 [root@king wireless7_2]# ls
 hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz  lib  Makefile  src

编译

 [root@king wireless7_2]# make
 KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
 make: *** /lib/modules/3.10.0-327.el7.x86_64/build: No such file or directory.  Stop.
 make: *** [all] Error 2

报错,分析错误原因,发现/lib/modules/3.10.0-327.el7.x86_64/build软链接失效,重做之

 ln -s /usr/src/kernels/3.10.0-327.el7.x86_64/ /lib/modules/3.10.0-327.el7.x86_64/build  #注意做软链接要写绝对路径

重新编译

 [root@king wireless7_2]# make clean && make
 KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean
 make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 CFG80211 API is prefered for this kernel version
 /usr/local/other/wireless7_2/Makefile:85: Neither CFG80211 nor Wireless Extension is enabled in kernel
  CLEAN   /usr/local/other/wireless7_2/.tmp_versions
  CLEAN   /usr/local/other/wireless7_2/Module.symvers
 make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
 make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 CFG80211 API is prefered for this kernel version
 Using CFG80211 API
  LD      /usr/local/other/wireless7_2/built-in.o
  CC [M]  /usr/local/other/wireless7_2/src/shared/linux_osl.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_linux.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_iw.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_station’:
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1460:20: error: ‘STATION_INFO_TX_BITRATE’ undeclared (first use in this function)
   sinfo->filled |= STATION_INFO_TX_BITRATE;
                    ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1460:20: note: each undeclared identifier is reported only once for each function it appears in
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1477:20: error: ‘STATION_INFO_SIGNAL’ undeclared (first use in this function)
   sinfo->filled |= STATION_INFO_SIGNAL;
                    ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: At top level:
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: initialization from incompatible pointer type [enabled by default]
  .get_station = wl_cfg80211_get_station,
  ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’) [enabled by default]
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_alloc_wdev’:
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1894:22: error: incompatible types when assigning to type ‘const struct wiphy_wowlan_support *’ from type ‘struct wiphy_wowlan_support’
  wdev->wiphy->wowlan = wl_wowlan_support;
                      ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: error: incompatible type for argument 3 of ‘cfg80211_inform_bss’
   (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
   ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4029:1: note: expected ‘enum cfg80211_bss_frame_type’ but argument is of type ‘const u8 *’
 cfg80211_inform_bss(struct wiphy *wiphy,
 ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: warning: passing argument 7 of ‘cfg80211_inform_bss’ makes integer from pointer without a cast [enabled by default]
   (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
   ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4029:1: note: expected ‘u16’ but argument is of type ‘const u8 *’
 cfg80211_inform_bss(struct wiphy *wiphy,
 ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: warning: passing argument 8 of ‘cfg80211_inform_bss’ makes pointer from integer without a cast [enabled by default]
   (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
   ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4029:1: note: expected ‘const u8 *’ but argument is of type ‘size_t’
 cfg80211_inform_bss(struct wiphy *wiphy,
 ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2037:3: error: too few arguments to function ‘cfg80211_inform_bss’
   (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
   ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4029:1: note: declared here
 cfg80211_inform_bss(struct wiphy *wiphy,
 ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2124:4: warning: passing argument 3 of ‘cfg80211_ibss_joined’ makes pointer from integer without a cast [enabled by default]
    cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, GFP_KERNEL);
    ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4219:6: note: expected ‘struct ieee80211_channel *’ but argument is of type ‘unsigned int’
 void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
      ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:2124:4: error: too few arguments to function ‘cfg80211_ibss_joined’
    cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, GFP_KERNEL);
    ^
In file included from /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
include/net/cfg80211.h:4219:6: note: declared here
 void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
      ^
make[2]: *** [/usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
make[1]: *** [_module_/usr/local/other/wireless7_2] Error 2
make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
make: *** [all] Error 2

发现报错,依次排错
由报错信息知wl_cfg80211_hybrid.c文件第1460,1477,1894,2037,2124行有错,做出如下更改

 [root@king wireless7_2]# vim src/wl/sys/wl_cfg80211_hybrid.c
 1460 //              sinfo->filled |= STATION_INFO_TX_BITRATE;
 1477 //              sinfo->filled |= STATION_INFO_SIGNAL;
 1894         wdev->wiphy->wowlan = &wl_wowlan_support;
 2035         cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, (const u8 *)(bi->BSSID.octet),
 2036                 0, beacon_proberesp->capab_info, beacon_proberesp->beacon_int,
 2037                 (const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
 2124                         cfg80211_ibss_joined(ndev, (u8 *)&wl->bssid, &wl->conf->channel, GFP_KERNEL);

tips:vim里按冒号输入set nu显示行号,冒号后接行号定位到该行

重新编译

 [root@king wireless7_2]# make clean && make
 KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean
 make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 CFG80211 API is prefered for this kernel version
 /usr/local/other/wireless7_2/Makefile:85: Neither CFG80211 nor Wireless Extension is enabled in kernel
  CLEAN   /usr/local/other/wireless7_2/.tmp_versions
  CLEAN   /usr/local/other/wireless7_2/Module.symvers
 make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
 make[1]: Entering directory `/usr/src/kernels/3.10.0-327.el7.x86_64'
 CFG80211 API is prefered for this kernel version
 Using CFG80211 API
  LD      /usr/local/other/wireless7_2/built-in.o
  CC [M]  /usr/local/other/wireless7_2/src/shared/linux_osl.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_linux.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_iw.o
  CC [M]  /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.o
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: initialization from incompatible pointer type [enabled by default]
  .get_station = wl_cfg80211_get_station,
  ^
 /usr/local/other/wireless7_2/src/wl/sys/wl_cfg80211_hybrid.c:1799:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’) [enabled by default]
  LD [M]  /usr/local/other/wireless7_2/wl.o
  Building modules, stage 2.
 CFG80211 API is prefered for this kernel version
 Using CFG80211 API
  MODPOST 1 modules
  CC      /usr/local/other/wireless7_2/wl.mod.o
  LD [M]  /usr/local/other/wireless7_2/wl.ko
 make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.el7.x86_64'

没有报错

 [root@king wireless7_2]# ls
 built-in.o                                       modules.order   wl.mod.c
 hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz  Module.symvers  wl.mod.o
 lib                                              src             wl.o
 Makefile                                         wl.ko

发现已生成驱动文件wl.ko

安装驱动文件

 [root@king wireless7_2]# make install
 install -D -m 755 wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
4.驱动文件加载和配置

加载驱动文件

 [root@king wireless7_2]# insmod wl.ko
 [root@king wireless7_2]# lsmod|grep wl
 wl                   6445574  0 
 cfg80211              572836  1 wl

发现右上角出现wifi选项,驱动加载成功,可以连接wifi啦,Enjoying it!

参考
1
2

转载于:https://blog.51cto.com/kking/2096757

  • 0
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值