php37 改性,低密度碳粘接碳纤维复合材料 (CBCF) 抗氧化改性研究

References

[1]BURCHELL T D.Porous Carbon Frbier-Carbon Binder Composites.Carbon Materials for Advanced Technologies;Elsevier Science, 1999:169–204.

[2]DAVIES I J, RAWLINGS R D.Microstructural investigation of low-density carbon-carbon composites.Journal of Materials Science, 1994, 29 (2) :338–344.

[3]DAVIES I J, RAWLINGS R D.Mechanical properties in compression of low density carbon/carbon composites.Composites, 1994, 25 (3) :229–236.

[4]LIU C, HAN J, ZHANG X, et al.Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique.Carbon, 2013, 59:551–554.

[5]WRENN G E, ABBATIELLO L A, LEWIS J.Method for Fabricating Light Weight Carbon-bonded Carbon Fiber Composites.US07/063, 059.1989–4–4.

[6]MARBÁN G, FUERTES A B, NEVSKAIA D M.Dry formation of low-density NomexTM rejects-based activated carbon fiber composites.Carbon, 2000, 38 (15) :2167–2170.

[7]AGRAWAL P, CHAVEZ-GARCIA J F, PHAM J.Fracture in phenolic impregnated carbon ablator.Journal of Spacecraft and Rockets, 2013, 50 (4) :735–741.

[8]AHMED A S, RAWLINGS R D, ELLACOTT S D, et al.Oxidation and thermal degradation resistance of silicon carbide coated low density carbon-carbon composite.Advances in Applied Ceramics, 2013, 112 (1) :23–32.

[9]NATALI M, KENNY J M, TORRE L.Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices:a review.Progress in Materials Science, 2016, 84:192–275.

[10]BESSIRE B K, LAHANKAR S A, MINTON T K.Pyrolysis of phenolic impregnated carbon ablator (PICA) .ACS Applied Materials&Interfaces, 2015, 7 (3) :1383–1395.

[11]GADIOU R, SERVERIN S, GIBOT P, et al.The synthesis of Si C and Ti C protective coatings for carbon fibers by the reactive replica process.Journal of the European Ceramic Society, 2008, 28 (11) :2265–2274.

[12]HALBIG M C, MCGUFFIN-CAWLEY J D, ECKEL A J, et al.Oxidation kinetics and stress effects for the oxidation of continuous carbon fibers within a microcracked C/Si C ceramic matrix composite.Journal of the American Ceramic Society, 2008, 91 (2) :519–526.

[13]FRANK E, STEUDLE L M, INGILDEEV D, et al.Carbon fibers:precursor systems, processing, structure, and properties.Angewandte Chemie International Edition, 2014, 53 (21) :5262–5298.

[14]SUJAK K, WŁOCHOWICZ A, WYSOCKI M.IR spectroscopic analysis of changes in the molecular structure of pitch carbon fibre precursor during oxidation.Acta Polymerica, 1984, 35 (9) :580–584.

[15]LI HE-JUN, XUE HUI FU QIAN-GANG, et al.Research status and prospect of anti-oxidation coatings for carbon/carbon composite.Journal of Inorgainc Materials, 2010, 25 (4) :337–343.

[16]GAO PENG-ZHAO, WANG HONG-JIE, JIN ZHI-HAO.Influence of Si O2 coating preparation process on the oxidation resistance of 3D carbon fiber braids.Journal of Inorganic Materials, 2003, 18 (4) :849–854.

[17]XU B, HONG C, QU Q, et al.Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method.Surface and Coatings Technology, 2015, 270:109–116.

[18]XU B, HONG C, ZHOU S, et al.High-temperature erosion resistance of Zr B2-based ceramic coating for lightweight carbon/carbon composites under simulated atmospheric re-entry conditions by high frequency plasma wind tunnel test.Ceramics International, 2016, 42 (8) :9511–9518.

[19]AHMED A S, RAWLINGS R D, ELLACOTT S D, et al.Oxidation and thermal degradation resistance of silicon carbide coated low density carbon-carbon composite.Advances in Applied Ceramics, 2013, 112 (1) :23–32.

[20]AHMED A S, CHLUP Z, DLOUHY I, et al.Mechanical properties of low-density Si C-coated carbon-bonded carbon fiber composites.International Journal of Applied Ceramic Technology, 2012, 9 (2) :401–412.

[21]DAVIES I J, RAWLINGS R D.Mechanical properties in compression of CVI-densified porous carbon/carbon composite.Composites Science and Technology, 1999, 59 (1) :97–104.

[22]BAXTER R I, RAWLINGS R D, IWASHITA N, et al.Effect of chemical vapor infiltration on erosion and thermal properties of porous carbon/carbon composite thermal insulation.Carbon, 2000, 38 (3) :441–449.

[23]ZHANG X, XU B, HONG C, et al.Carbon-bonded carbon fiber composites containing uniformly distributed silicon carbide.RSC Advances, 2014, 4:6591–6596.

[24]SMEACETTO F, FERRARIS M, SALVO M, et al.Protective coatings for carbon bonded carbon fibre composites.Ceramics International, 2008, 34 (5) :1297–1301.

[25]DUMBACHER D L.X-37 Flight Demonstrator Porject:Capabilities for Future Space Transportation Systems Development.Vancouver, Canada:2004.

[26]GRANTZ A C.X-37B Orbital Test Vehicle and Derivatives.California:Long Beach, 2011.

[27]ZHANG ZONG-BO, XIAO FENG-YAN, LUO YONG-MING, et al.Research progress in perhydropolysilazane coatings.Paint&Coating Industry, 2014, 43 (4) :74–79.

[28]GÜNTHNER M, KRAUS T, KRENKEL W, et al.Particle-filled PHPS silazane-based coatings on steel.International Journal of Applied Ceramic Technology, 2009, 6 (3) :373–380.

[29]FUNAYAMA O, TASHIRO Y, KAMO A, et al.Conversion mechanism of perhydropolysilazane into silicon nitride-based ceramics.Journal of Materials Science, 1994, 29 (18) :4883–4888.

[30]PENG Z, FU X, ZHU N, et al.Preparation and growth mechanism of clustered one-dimensional Si Ox amorphous nanowires by catalytic pyrolysis of a polymer precursor.Journal of Non-Crystalline Solids, 2009, 355 (43/44) :2156–2159.

[31]MONTI M, DAL BIANCO B, BERTONCELLO R, et al.New protective coatings for ancient glass:silica thin-films from perhydropolysilazane.Journal of Cultural Heritage, 2008, 9 (Supplement) :143–145.

[32]XIAO FENG-YAN, ZHANG ZONG-BO, ZENG FAN, et al.Preparation and characterization of Si Ox coating from perhydropolysilazane.Rare Metal Materials and Engineering, 2013, 42 (S1) :151–154.

[33]QI GONG-JIN, ZHANG CHANG-RUI, HU HAI-FENG, et al.Synthesis and characterization of perhydropolysilazane.Journal of National University of Defense Technology, 2005, 27 (6) :14–19.

[34]BARROSO G S, KRENKEL W, MOTZ G.Low thermal conductivity coating system for application up to 1000℃by simple PDC processing with active and passive fillers.Journal of the European Ceramic Society, 2015, 35 (12) :3339–3348.

[35]GÜNTHNER M, SCHÜTZ A, GLATZEL U, et al.High performance environmental barrier coatings, part I:Passive filler loaded Si CN system for steel.Journal of the European Ceramic Society, 2011, 31 (15) :3003–3010.