win7开机慢,关机慢,运行慢的优化解决办法

第九步: 修改 kill service 的时间

按下 windows徽标键+R键,调出“运行”对话框,输入“regedit"-----确定,弹出“注册表编辑器”,找到HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control ,鼠标点击Control ,右边框中显示Wait To Kill Service Time out ,右键将Wait To Kill Service Time out后面的数值改到很小就可以了,一般默认值是12000(12秒)。改好后重启。


不加载DLL文件:在[开始]—》[运行]—》键入[Regedit]- HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorer ,建立一个AlwaysUnloadDLL,值为1的双字节值。如果想要去除这项优化,把该键值设为0。

第十步、Memory Management 

Hey Dchan35, I finally cured the problem with some tweaks to my registry. Microsoft support did not help at all. Go here for more info : http://www.w7forums.com/turning-off-computer-t3916p3.html 


 What you want to do is go to the registry and change a couple values.  Open the registry and locate the key{ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management}, then change the value of ClearPageFile at Shutdown to a 0 IF the value is 1. If the value is 1, it will take longer for your computer to shutdown..this fix cured it all for me. I also did this : HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\
Highlight the value WaitToKillServiceTimeout
Change this value to 1000.

It seems like you are no newbie, so I would recommend doing this registry changes. Just go into the start menu and type regedit and the registry editor will pop up (you may know that already lol). Locate the above keys, change the values, save and restart, and this should work for you. I hope it does man...its really frustrating when it happens and you get no help from MS support.

检查是否是某些服务引起的

http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-is-very-slow-to-shutdown/fb35a679-c9b8-4a97-95c4-39c60e218130?auth=1

Enable half of the Services items:

 

In this step, you are trying to isolate which background service is causing the interference with the program. Start by turning half of the services on and turning half off.

 

  • Click Start Orb > type msconfig in the searchbox

  • Click msconfig in the search results

  • Click the Services tab, check the Hide all Microsoft Services box, and then click to select half of the check boxes in the Services list, leaving the other half unchecked.

  • Click OK, and when you are prompted, click Restart.



转载于:https://my.oschina.net/u/2308739/blog/668981

解决 第一次开机,开机后假死/卡顿 问题,转载+补充! 大家可能都明白,最近我在纠结这个问题,但是一直不知道问题根本,只知道出现在硬盘上面,更谈不上解决办法,因为本人对硬件不是那么深入的了解,基础的原理知识从课本上学过,只是我学专业偏软的,如果问我网络方面只是还能搞定,一些软件问题还能解释,但是例如硬盘扇区,扇区没有对齐导致的第一次开机问题,还真无法解释,那么就不用详细解释了,遇到此问题的,按照以下方法解决吧,软件也是WDC官方出的! 警告:此贴的操作有一定概率引起磁盘文件丢失,在进行操作前建议备份重要数据。(据说我没备份,对齐后文件无任何丢失) 症状描述:不管是xp还是Win7关机隔三四个小时再开机硬盘灯一直亮,大概八分钟后开始闪烁,启动到系统界面大概四分钟,然后进系统卡四分钟。之后系统一切正常,不卡了。再重启启动速度也快了,一分钟(原版系统未作任何优化)。 症状原因:极有可能是西数的技术 高级格式化使用的4K扇区,在分区时未对齐。有这个情况的应该都是在pe下用分区软件分的区然后装的系统吧。只有使用win7或者ubuntu的分区工具才不会出现未对齐情况。有些说只在大硬盘上采用了这个技术,不得不说,4830TG上使用的西数bpvt系列确实采用了这个技术。另外,有部分朋友反映日立硬盘也会出现这个问题,这时候可以上日立官网下载同样功能的工具进行对齐操作。 解决方法:很简单,下载西数wd align软件。WD align下载地址:http://dl.dbank.com/c0pegwpbtu。(注:如果你在西数官网注册你的硬盘产品,会发现下边就有提示要你安装wd align软件检测扇区是否对齐。)软件使用很简单,相信会点分区知识的都会用。有这个问题的可以去试下。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值