2440休眠问题解决不了

最新推荐文章于 2021-12-21 16:29:42 发布

weixin_34082854

最新推荐文章于 2021-12-21 16:29:42 发布

阅读量40

点赞数

原文链接：http://www.cnblogs.com/gmh915/archive/2010/05/24/1945416.html

版权

在2440中进入休眠函数
void OEMPowerOff()
{
    static UINT32 saveArea[51];
    S3C2440A_INTR_REG *pIntr = (S3C2440A_INTR_REG*)OALPAtoVA(S3C2440A_BASE_REG_PA_INTR, FALSE);
    S3C2440A_IOPORT_REG *pIOPort = (S3C2440A_IOPORT_REG*)OALPAtoVA(S3C2440A_BASE_REG_PA_IOPORT, FALSE);
    S3C2440A_LCD_REG *pLCD = (S3C2440A_LCD_REG*)OALPAtoVA(S3C2440A_BASE_REG_PA_LCD, FALSE);
    RETAILMSG(1, (TEXT(":::E:\WINCE500\PLATFORM\SMDK2440A\Src\Common\Power\off.c\r\n")));
    // First do platform specific actions
    BSPPowerOff();
    // Then save system registers
    saveArea[0] = INPORT32(&pIOPort->GPACON);
    saveArea[1] = INPORT32(&pIOPort->GPADAT);
    saveArea[2] = INPORT32(&pIOPort->GPBCON);
    saveArea[3] = INPORT32(&pIOPort->GPBDAT);
    saveArea[4] = INPORT32(&pIOPort->GPBUP);
    saveArea[5] = INPORT32(&pIOPort->GPCCON);
    saveArea[6] = INPORT32(&pIOPort->GPCDAT);
    saveArea[7] = INPORT32(&pIOPort->GPCUP);
    saveArea[8] = INPORT32(&pIOPort->GPDCON);
    saveArea[9] = INPORT32(&pIOPort->GPDDAT);
    saveArea[10] = INPORT32(&pIOPort->GPDUP);
    saveArea[11] = INPORT32(&pIOPort->GPECON);
    saveArea[12] = INPORT32(&pIOPort->GPEDAT);
    saveArea[13] = INPORT32(&pIOPort->GPEUP);
    saveArea[14] = INPORT32(&pIOPort->GPFCON);
    saveArea[15] = INPORT32(&pIOPort->GPFDAT);
    saveArea[16] = INPORT32(&pIOPort->GPFUP);
    saveArea[17] = INPORT32(&pIOPort->GPGCON);
    saveArea[18] = INPORT32(&pIOPort->GPGDAT);
    saveArea[19] = INPORT32(&pIOPort->GPGUP);
    saveArea[20] = INPORT32(&pIOPort->GPHCON);
    saveArea[21] = INPORT32(&pIOPort->GPHDAT);
    saveArea[22] = INPORT32(&pIOPort->GPHUP);

    saveArea[23] = INPORT32(&pIOPort->MISCCR);
    saveArea[24] = INPORT32(&pIOPort->DCLKCON);
    saveArea[25] = INPORT32(&pIOPort->EXTINT0);
    saveArea[26] = INPORT32(&pIOPort->EXTINT1);
    saveArea[27] = INPORT32(&pIOPort->EXTINT2);
    saveArea[28] = INPORT32(&pIOPort->EINTFLT0);
    saveArea[29] = INPORT32(&pIOPort->EINTFLT1);
    saveArea[30] = INPORT32(&pIOPort->EINTFLT2);
    saveArea[31] = INPORT32(&pIOPort->EINTFLT3);
    saveArea[32] = INPORT32(&pIOPort->EINTMASK);

    saveArea[33] = INPORT32(&pIntr->INTMOD);
    saveArea[34] = INPORT32(&pIntr->INTMSK);
    saveArea[35] = INPORT32(&pIntr->INTSUBMSK);

    saveArea[36] = INPORT32(&pLCD->TCONSEL);
    saveArea[37] = INPORT32(&pLCD->LCDINTMSK);
    saveArea[38] = INPORT32(&pLCD->TPAL);
    saveArea[39] = INPORT32(&pLCD->DITHMODE);
    saveArea[40] = INPORT32(&pLCD->BLUELUT);
    saveArea[41] = INPORT32(&pLCD->GREENLUT);
    saveArea[42] = INPORT32(&pLCD->REDLUT);
    saveArea[43] = INPORT32(&pLCD->LCDSADDR3);
    saveArea[44] = INPORT32(&pLCD->LCDSADDR2);
    saveArea[45] = INPORT32(&pLCD->LCDSADDR1);
    saveArea[46] = INPORT32(&pLCD->LCDCON5);
    saveArea[47] = INPORT32(&pLCD->LCDCON4);
    saveArea[48] = INPORT32(&pLCD->LCDCON3);
    saveArea[49] = INPORT32(&pLCD->LCDCON2);
    saveArea[50] = INPORT32(&pLCD->LCDCON1);

    pLCD->LCDCON1   = 0;
    pLCD->LCDCON2   = 0;
    pLCD->LCDCON3   = 0;
    pLCD->LCDCON4   = 0;
    pLCD->LCDCON5   = 0;
    pLCD->LCDSADDR1 = 0;
    pLCD->LCDSADDR2 = 0;
    pLCD->LCDSADDR3 = 0;
    pLCD->TCONSEL    = 0;
    pLCD->TPAL      = 0;

ConfigStopGPIO();

    // Switch off power for KITL device
      OALKitlPowerOff(); // made_by_gmh

///GMH
//pIOPort->GPGCON &= 0xfcff;
// pIOPort->GPGCON |= 0x0300;
// pIOPort->GPGDAT &=0xef;
// RETAILMSG(1, (TEXT("::: pwr_en=0@josh915\r\n")));
   /GMH_END

    // Go to power off mode
     OALCPUPowerOff();//这个函数就在starup.s中

之后进入oal的starup.s中
LEAF_ENTRY OALCPUPowerOff

;       1. Push SVC state onto our stack
stmdb   sp!, {r4-r12}
stmdb   sp!, {lr}

; 2. Save MMU & CPU Register to RAM
ldr r3, =SLEEPDATA_BASE_VIRTUAL ; base of Sleep mode storage

ldr r2, =Awake_address ; store Virtual return address
str r2, [r3], #4

mrc     p15, 0, r2, c1, c0, 0           ; load r2 with MMU Control
ldr     r0, =MMU_CTL_MASK               ; mask off the undefined bits
bic     r2, r2, r0
str     r2, [r3], #4                    ; store MMU Control data

mrc     p15, 0, r2, c2, c0, 0           ; load r2 with TTB address.
ldr     r0, =MMU_TTB_MASK               ; mask off the undefined bits
bic     r2, r2, r0
str     r2, [r3], #4                    ; store TTB address

mrc p15, 0, r2, c3, c0, 0 ; load r2 with domain access control.
str r2, [r3], #4 ; store domain access control

str sp, [r3], #4 ; store SVC stack pointer

mrs r2, spsr
str r2, [r3], #4 ; store SVC status register

mov     r1, #Mode_FIQ:OR:I_Bit:OR:F_Bit ; Enter FIQ mode, no interrupts
msr     cpsr, r1
mrs     r2, spsr
stmia   r3!, {r2, r8-r12, sp, lr}       ; store the FIQ mode registers

mov     r1, #Mode_ABT:OR:I_Bit:OR:F_Bit ; Enter ABT mode, no interrupts
msr     cpsr, r1
mrs  r0, spsr
stmia   r3!, {r0, sp, lr}               ; store the ABT mode Registers

mov     r1, #Mode_IRQ:OR:I_Bit:OR:F_Bit ; Enter IRQ mode, no interrupts
msr     cpsr, r1
mrs     r0, spsr
stmia   r3!, {r0, sp, lr}               ; store the IRQ Mode Registers

mov     r1, #Mode_UND:OR:I_Bit:OR:F_Bit ; Enter UND mode, no interrupts
msr     cpsr, r1
mrs     r0, spsr
stmia   r3!, {r0, sp, lr}               ; store the UND mode Registers

mov     r1, #Mode_SYS:OR:I_Bit:OR:F_Bit ; Enter SYS mode, no interrupts
msr     cpsr, r1
stmia   r3!, {sp, lr}                   ; store the SYS mode Registers

mov r1, #Mode_SVC:OR:I_Bit:OR:F_Bit ; Back to SVC mode, no interrupts
msr cpsr, r1

;       3. do Checksum on the Sleepdata
ldr     r3, =SLEEPDATA_BASE_VIRTUAL ; get pointer to SLEEPDATA
ldr     r2, =0x0
ldr     r0, =(SLEEPDATA_SIZE-1)  ; get size of data structure (in words)
30
ldr     r1, [r3], #4
and     r1, r1, #0x1
mov     r1, r1, ROR #31
add     r2, r2, r1
subs    r0, r0, #1
bne     %b30

ldr     r0, =vGPIOBASE
;;;add  r2, r2, #1    ; test checksum of the Sleep data error
str     r2, [r0, #oGSTATUS3]  ; Store in Power Manager Scratch pad register

ldr     r0, =vGPIOBASE
ldr     r1, =0x550a
str     r1, [r0, #oGPFCON]

ldr  r1, =0x30
str  r1, [r0, #oGPFDAT]

;       4. Interrupt Disable
    ldr     r0, =vINTBASE
    mvn     r2, #0
str     r2, [r0, #oINTMSK]
str     r2, [r0, #oSRCPND]
str     r2, [r0, #oINTPND]

;;       5. Cache Flush
bl  OALClearUTLB
bl  OALFlushICache
ldr     r0, = (DCACHE_LINES_PER_SET - 1)
ldr     r1, = (DCACHE_NUM_SETS - 1)
ldr     r2, = DCACHE_SET_INDEX_BIT
ldr     r3, = DCACHE_LINE_SIZE
bl  OALFlushDCache

; 6. Setting Wakeup External Interrupt(EINT0,1,2) Mode
ldr r0, =vGPIOBASE

ldr r1, =0x550a
str r1, [r0, #oGPFCON]

; ldr r1, =0x55550100
; str r1, [r0, #oGPGCON]

;       7. Go to Power-Off Mode
ldr r0, =vMISCCR   ; hit the TLB
ldr  r0, [r0]
ldr r0, =vCLKCON
ldr  r0, [r0]

ldr     r0, =vREFRESH
ldr     r1, [r0]  ; r1=rREFRESH
orr     r1, r1, #(1 << 22)

ldr r2, =vMISCCR
ldr  r3, [r2]
orr  r3, r3, #(7<<17)        ; Make sure that SCLK0:SCLK->0, SCLK1:SCLK->0, SCKE=L during boot-up
bic  r3, r3, #(7<<20)
orr  r3, r3, #(6<<20)

ldr r4, =vCLKCON
ldr r5, =0x1ffff8 ; Power Off Mode

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Sometimes it is not working in cache mode. So I modify to jump to ROM area.
;
;;; ldr  r6, =0x92000000  ; make address to 0x9200 0020
;;; add  r6, r6, #0x20  ;
;;; mov     pc, r6    ; jump to Power off code in ROM
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

b SelfRefreshAndPowerOff

ALIGN 32 ; for I-Cache Line(32Byte, 8 Word)

SelfRefreshAndPowerOff  ; run with Instruction Cache's code
str     r1, [r0]  ; Enable SDRAM self-refresh
str  r3, [r2]  ; MISCCR Setting
str     r5, [r4]  ; Power Off !!
b       .

这个汇编代码实现真正的休眠设置，系统能一步步执行下来，执行到最后，系统电流下降了100多ma，sclk0等时钟信号也变0了，但是lcd控制信号pwren由3.3降到2.3v左右，lcd没有被关闭，出现了白屏，也就是系统没有真正进入休眠中。可能有人会说，直接用io把pwren设置为0，可是系统已经设置过了，在
BSPPowerOff();函数中：
    /* LCD Controller Disable               */
    CLRPORT32(&pIOPort->GPGDAT, 1 << 4);
已经设置过，即使强制把lcd背光关了，电流也只能再少100多ma，还有200多ma的电流，我猜想内核其实没有真正休眠下来，假如真的休眠了，lcd也会真正被关闭
对比了很多网上的bsp，基本上也差不多，没多大区别，，不知道原因出在哪里
映射地址情况如下

SLEEPDATA_BASE_VIRTUAL EQU 0xA0028000 ; keep in sync w/ config.bib
SLEEPDATA_BASE_PHYSICAL EQU 0x30028000

config.bib：MEMORY
    NK    80200000 02200000 RAMIMAGE
;    RAM    82400000 05c00000 RAM
    RAM    82400000 01c00000 RAM

转载于:https://www.cnblogs.com/gmh915/archive/2010/05/24/1945416.html

weixin_34082854

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
2440休眠问题解决不了

在2440中进入休眠函数void OEMPowerOff(){ static UINT32 saveArea[51]; S3C2440A_INTR_REG *pIntr = (S3C2440A_INTR_REG*)OALPAtoVA(S3C2440A_BASE_REG_PA_INTR, FALSE); S3C2440A_IOPORT_REG *pIOPort = (S3C2440...
复制链接

扫一扫