RationalDMIS 2024两点法测量轴类零件

登录后复制

$$/*  Header
DMISMN/'Created by [山涧果子]  
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/PROG, MAN
SNSET/APPRCH, 4.0000
SNSET/RETRCT, 4.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, 5.0000
RECALL/D(MCS)
SNSLCT/S(D2L30)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, COMPLM
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
F(PT1)=FEAT/POINT,CART,541.4725,228.2484,24.9880,0.0000,0.0000,1.0000
MEAS/POINT, F(PT1), 1
  PTMEAS/CART, 541.4725,228.2484,24.9880,0.0000,0.0000,1.0000
ENDMES
F(PT2)=FEAT/POINT,CART,541.8111,225.8350,22.9232,0.0000,-1.0000,0.0000
MEAS/POINT, F(PT2), 1
  PTMEAS/CART, 541.8111,225.8350,22.9232,0.0000,-1.0000,0.0000
ENDMES
D(CRD1) = TRANS/XORIG, FA(PT1), YORIG, FA(PT2), ZORIG, FA(PT1)
MODE/PROG,MAN
F(PLN1) = FEAT/PLANE,CART, 0,0,0, 0,0,1
SNSET/APPRCH, 4
SNSET/RETRCT, 4
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5
SNSET/CLRSRF, F(PLN1), 30
F(CIR1)=FEAT/CIRCLE,OUTER,CART,0.0000,5.0000,-23.2400,-0.0000,-1.0000,-0.0000, 46.4800
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -28.2334, 5.0000, 30.9934
MEAS/CIRCLE, F(CIR1), 8
  GOTO/CART,   -28.2334, 5.0000,  30.9934
  PTMEAS/CART, -23.2400, 5.0000, -23.2400, -1.0000, 0.0000, 0.0000
  PTMEAS/CART, -20.9385, 5.0000, -13.1565, -0.9010, 0.0000, 0.4339
  PTMEAS/CART, -14.4899, 5.0000,  -5.0702, -0.6235, 0.0000, 0.7818
  PTMEAS/CART,  -5.1714, 5.0000,  -0.5827, -0.2225, 0.0000, 0.9749
  PTMEAS/CART,   5.1714, 5.0000,  -0.5827,  0.2225, 0.0000, 0.9749
  PTMEAS/CART,  14.4899, 5.0000,  -5.0702,  0.6235, 0.0000, 0.7818
  PTMEAS/CART,  20.9385, 5.0000, -13.1565,  0.9010, 0.0000, 0.4339
  PTMEAS/CART,  23.2400, 5.0000, -23.2400,  1.0000, 0.0000, 0.0000
  GOTO/CART,    28.2334, 5.0000,  30.9934
ENDMES
F(CIR2)=FEAT/CIRCLE,OUTER,CART,0.0000,41.0000,-23.2400,-0.0000,-1.0000,-0.0000, 46.4800
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 28.2334, 41.0000, 30.9934
MEAS/CIRCLE, F(CIR2), 8
  GOTO/CART,    28.2334, 41.0000,  30.9934
  PTMEAS/CART,  23.2400, 41.0000, -23.2400,  1.0000, 0.0000, 0.0000
  PTMEAS/CART,  20.9385, 41.0000, -13.1565,  0.9010, 0.0000, 0.4339
  PTMEAS/CART,  14.4899, 41.0000,  -5.0702,  0.6235, 0.0000, 0.7818
  PTMEAS/CART,   5.1714, 41.0000,  -0.5827,  0.2225, 0.0000, 0.9749
  PTMEAS/CART,  -5.1714, 41.0000,  -0.5827, -0.2225, 0.0000, 0.9749
  PTMEAS/CART, -14.4899, 41.0000,  -5.0702, -0.6235, 0.0000, 0.7818
  PTMEAS/CART, -20.9385, 41.0000, -13.1565, -0.9010, 0.0000, 0.4339
  PTMEAS/CART, -23.2400, 41.0000, -23.2400, -1.0000, 0.0000, 0.0000
  GOTO/CART,   -28.2334, 41.0000,  30.9934
ENDMES
F(LN_BF3D1)=FEAT/LINE,BND,CART,0.0000,5.0000,-23.2400,0.0000,41.0000,-23.2400
CONST/LINE,F(LN_BF3D1),BF,FA(CIR1),FA(CIR2)
D(CRD2) = DATSET/FA(LN_BF3D1), YDIR
D(CRD2) = TRANS/YORIG, FA(PT2), ZORIG, FA(LN_BF3D1), XORIG, FA(LN_BF3D1)
F(PLN2) = FEAT/PLANE,CART, 0,0,30, 0,0,1
SNSET/APPRCH, 3
SNSET/RETRCT, 3
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5
SNSET/CLRSRF, F(PLN2), 30
F(PT3) = FEAT/POINT,CART, 0,0,21, 0,-1,0
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -0.0000, -3.9935, 21.0000
MEAS/POINT, F(PT3), 1
  GOTO/CART, -0.0000,-3.9935,60.9935
  PTMEAS/CART, 0.0000,0.0000,21.0000,-0.0000,-1.0000,-0.0000
  GOTO/CART, -0.0000,-3.9935,60.9935
ENDMES
D(CRD3) = TRANS/YORIG, FA(PT3)
F(DC-1)=FEAT/CIRCLE,OUTER,CART,0.0000,5.0000,0.0000,-0.0000,-1.0000,-0.0000, 46.4800
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 27.2335, 5.0000, 60.9934
MEAS/CIRCLE, F(DC-1), 8
  GOTO/CART,    27.2335, 5.0000, 60.9934
  PTMEAS/CART,  23.2400, 5.0000,  0.0000,  1.0000,  0.0000, -0.0000
  PTMEAS/CART,  20.9385, 5.0000, 10.0835,  0.9010,  0.0000,  0.4339
  PTMEAS/CART,  14.4899, 5.0000, 18.1698,  0.6235,  0.0000,  0.7818
  PTMEAS/CART,   5.1714, 5.0000, 22.6573,  0.2225,  0.0000,  0.9749
  PTMEAS/CART,  -5.1714, 5.0000, 22.6573, -0.2225,  0.0000,  0.9749
  PTMEAS/CART, -14.4899, 5.0000, 18.1698, -0.6235,  0.0000,  0.7818
  PTMEAS/CART, -20.9385, 5.0000, 10.0835, -0.9010,  0.0000,  0.4339
  PTMEAS/CART, -23.2400, 5.0000,  0.0000, -1.0000, -0.0000,  0.0000
  GOTO/CART,   -27.2335, 5.0000, 60.9934
ENDMES
F(DC-2) = FEAT/CIRCLE,OUTER,CART, 0,41,0, 0,1,0, 46.48
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -27.2335, 41.0000, 60.9934
MEAS/CIRCLE, F(DC-2), 8
  GOTO/CART,   -27.2335, 41.0000, 60.9934
  PTMEAS/CART, -23.2400, 41.0000,  0.0000, -1.0000, -0.0000,  0.0000
  PTMEAS/CART, -20.9385, 41.0000, 10.0835, -0.9010,  0.0000,  0.4339
  PTMEAS/CART, -14.4899, 41.0000, 18.1698, -0.6235,  0.0000,  0.7818
  PTMEAS/CART,  -5.1714, 41.0000, 22.6573, -0.2225,  0.0000,  0.9749
  PTMEAS/CART,   5.1714, 41.0000, 22.6573,  0.2225,  0.0000,  0.9749
  PTMEAS/CART,  14.4899, 41.0000, 18.1698,  0.6235,  0.0000,  0.7818
  PTMEAS/CART,  20.9385, 41.0000, 10.0835,  0.9010,  0.0000,  0.4339
  PTMEAS/CART,  23.2400, 41.0000,  0.0000,  1.0000,  0.0000, -0.0000
  GOTO/CART,    27.2334, 41.0000, 60.9934
ENDMES
F(LN_BF3D2)=FEAT/LINE,BND,CART,0.0000,5.0000,0.0000,0.0000,41.0000,0.0000
CONST/LINE,F(LN_BF3D2),BF,FA(DC-1),FA(DC-2)
D(CRD4) = DATSET/FA(LN_BF3D2), YDIR
D(CRD4) = TRANS/YORIG, FA(PT3), ZORIG, FA(LN_BF3D2), XORIG, FA(LN_BF3D2)
GOTO/27.2304, 40.4531, 86.2396
SNSLCT/S(D2L30_A90_B180)
GOTO/12.8224, -47.8226, 176.3427
GOTO/-8.7596, -48.8649, -3.5465
F(PLN3) = FEAT/PLANE,CART, 0,0,0, 0,-1,0
SNSET/APPRCH, 3
SNSET/RETRCT, 3
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5
SNSET/CLRSRF, F(PLN3), 30
F(PLN4)=FEAT/PLANE,CART,0.0000,0.0000,0.0000,0.0000,-1.0000,0.0000
$$ Measurement points are created through actual points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -15.8041, -7.0401, -11.4811
MEAS/PLANE, F(PLN4), 4
  PTMEAS/CART, -15.8607, 0, -11.4262, 0, -1, 0
  PTMEAS/CART, -15.8615, 0,   6.7016, 0, -1, 0
  PTMEAS/CART,  12.8845,0,  10.5963, 0, -1, 0
  PTMEAS/CART,  11.4925, 0, -13.2617, 0, -1,0
ENDMES
GOTO/31.4801, -29.7195, -13.8072
F(J-1) = FEAT/CIRCLE,OUTER,CART, 0,5,0.005586, 0,-1.000000,0, 46.480000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 31.4811, -30.9964, -13.8072
MEAS/CIRCLE, F(J-1), 8
  GOTO/CART,    31.4811, -30.9964, -13.8072
  GOTO/CART,    27.2364, -30.9964,   0.0056
  PTMEAS/CART,  23.2400,   5.0000,   0.0056,  1.0000, -0.0000, -0.0000
  PTMEAS/CART,  20.9385,   5.0000,  10.0890,  0.9010, -0.0000,  0.4339
  PTMEAS/CART,  14.4899,   5.0000,  18.1753,  0.6235,  0.0000,  0.7818
  PTMEAS/CART,   5.1714,   5.0000,  22.6629,  0.2225,  0.0000,  0.9749
  PTMEAS/CART,  -5.1714,   5.0000,  22.6629, -0.2225,  0.0000,  0.9749
  PTMEAS/CART, -14.4899,   5.0000,  18.1754, -0.6235,  0.0000,  0.7818
  PTMEAS/CART, -20.9385,   5.0000,  10.0890, -0.9010,  0.0000,  0.4339
  PTMEAS/CART, -23.2400,   5.0000,   0.0056, -1.0000,  0.0000,  0.0000
  GOTO/CART,   -27.2364, -30.9964,   0.0056
ENDMES
GOTO/-27.2285, -33.7805, 129.0302
GOTO/-28.4722, 135.8001, 132.7577
SNSLCT/S(D2L30_A90_B0)
GOTO/-7.7215, 100.4945, 107.1896
GOTO/-7.2122, 116.6444, 8.4542
F(PLN5) = FEAT/PLANE,CART, 0,50,0, 0,1,0
SNSET/APPRCH, 3.0000
SNSET/RETRCT, 3.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, F(PLN5), 30.0000
F(PLN6) = FEAT/PLANE,CART,-2.1671,45.0000,1.1650,0.0000,1.0000,0.0000
$$ Measurement points are created through actual points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -14.5695, 49.6855, 11.0455
MEAS/PLANE, F(PLN6), 4
  PTMEAS/CART,-14.5416,45.0000,10.9577,0.0000,1.0000,0.0000
  PTMEAS/CART,-14.5415,45.0000,-10.7379,0.0000,1.0000,0.0000
  PTMEAS/CART,13.8401,45.0000,-10.7386,0.0000,1.0000,0.0000
  PTMEAS/CART,6.5746,45.0000,15.1786,0.0000,1.0000,0.0000
ENDMES
F(J-2) = FEAT/CIRCLE,OUTER,CART, 0,41,0, 0,1,0, 46.480000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 5.6784, 80.9972, 15.7504
MEAS/CIRCLE, F(J-2), 8
  GOTO/CART,     5.6784, 80.9972, 15.7504
  GOTO/CART,    27.2372, 80.9972, -0.0000
  PTMEAS/CART,  23.2400, 41.0000,  0.0000,  1.0000, -0.0000, -0.0000
  PTMEAS/CART,  20.9385, 41.0000, 10.0835,  0.9010, -0.0000,  0.4339
  PTMEAS/CART,  14.4899, 41.0000, 18.1698,  0.6235,  0.0000,  0.7818
  PTMEAS/CART,   5.1714, 41.0000, 22.6573,  0.2225,  0.0000,  0.9749
  PTMEAS/CART,  -5.1714, 41.0000, 22.6573, -0.2225,  0.0000,  0.9749
  PTMEAS/CART, -14.4899, 41.0000, 18.1698, -0.6235,  0.0000,  0.7818
  PTMEAS/CART, -20.9385, 41.0000, 10.0835, -0.9010,  0.0000,  0.4339
  PTMEAS/CART, -23.2400, 41.0000,  0.0000, -1.0000,  0.0000,  0.0000
  GOTO/CART,   -27.2372, 80.9972,  0.0000
ENDMES
GOTO/-51.1624, 77.5801, 118.2295
GOTO/39.2083, 43.1605, 257.0799
SNSLCT/S(D2L30)
GEOALG/DISTB, FEATPT, ON
FEAT/PROP, CONE, APEX
T(TDST1)=TOL/DISTB,NOMINL,45.0000,-0.0500,0.0500,YAXIS,AVG
OUTPUT/FA(PLN4),FA(PLN6),TA(TDST1)
T(TCOR1)=TOL/CORTOL,XAXIS,-0.0100,0.0100
OUTPUT/FA(J-1),TA(TCOR1)
T(TCOR2)=TOL/CORTOL,YAXIS,-0.0100,0.0100
OUTPUT/FA(J-1),TA(TCOR2)
T(TDM2)=TOL/DIAM,-0.0210,0.0000
OUTPUT/FA(J-1),TA(TDM2)
T(TCOR3)=TOL/CORTOL,XAXIS,-0.0100,0.0100
OUTPUT/FA(J-2),TA(TCOR3)
T(TCOR4)=TOL/CORTOL,YAXIS,-0.0100,0.0100
OUTPUT/FA(J-2),TA(TCOR4)
T(TDM3)=TOL/DIAM,-0.0210,0.0000
OUTPUT/FA(J-2),TA(TDM3)

• 1.
• 2.
• 3.
• 4.
• 5.
• 6.
• 7.
• 8.
• 9.
• 10.
• 11.
• 12.
• 13.
• 14.
• 15.
• 16.
• 17.
• 18.
• 19.
• 20.
• 21.
• 22.
• 23.
• 24.
• 25.
• 26.
• 27.
• 28.
• 29.
• 30.
• 31.
• 32.
• 33.
• 34.
• 35.
• 36.
• 37.
• 38.
• 39.
• 40.
• 41.
• 42.
• 43.
• 44.
• 45.
• 46.
• 47.
• 48.
• 49.
• 50.
• 51.
• 52.
• 53.
• 54.
• 55.
• 56.
• 57.
• 58.
• 59.
• 60.
• 61.
• 62.
• 63.
• 64.
• 65.
• 66.
• 67.
• 68.
• 69.
• 70.
• 71.
• 72.
• 73.
• 74.
• 75.
• 76.
• 77.
• 78.
• 79.
• 80.
• 81.
• 82.
• 83.
• 84.
• 85.
• 86.
• 87.
• 88.
• 89.
• 90.
• 91.
• 92.
• 93.
• 94.
• 95.
• 96.
• 97.
• 98.
• 99.
• 100.
• 101.
• 102.
• 103.
• 104.
• 105.
• 106.
• 107.
• 108.
• 109.
• 110.
• 111.
• 112.
• 113.
• 114.
• 115.
• 116.
• 117.
• 118.
• 119.
• 120.
• 121.
• 122.
• 123.
• 124.
• 125.
• 126.
• 127.
• 128.
• 129.
• 130.
• 131.
• 132.
• 133.
• 134.
• 135.
• 136.
• 137.
• 138.
• 139.
• 140.
• 141.
• 142.
• 143.
• 144.
• 145.
• 146.
• 147.
• 148.
• 149.
• 150.
• 151.
• 152.
• 153.
• 154.
• 155.
• 156.
• 157.
• 158.
• 159.
• 160.
• 161.
• 162.
• 163.
• 164.
• 165.
• 166.
• 167.
• 168.
• 169.
• 170.
• 171.
• 172.
• 173.
• 174.
• 175.
• 176.
• 177.
• 178.
• 179.
• 180.
• 181.
• 182.
• 183.
• 184.
• 185.
• 186.
• 187.
• 188.
• 189.
• 190.
• 191.
• 192.
• 193.
• 194.
• 195.
• 196.
• 197.
• 198.
• 199.
• 200.
• 201.
• 202.
• 203.
• 204.
• 205.
• 206.
• 207.
• 208.
• 209.
• 210.
• 211.
• 212.
• 213.

原创作者: u_14941238 转载于: https://blog.51cto.com/u_14941238/11830094