设置启动级别

[root@centos7 ~]# ll /etc/systemd/system/default.target
lrwxrwxrwx. 1 root root 37 2月  24 14:51 /etc/systemd/system/default.target -> /lib/systemd/system/multi-user.target

[root@centos7 ~]# ll /lib/systemd/system/runlevel*.target
lrwxrwxrwx. 1 root root 15 2月  24 14:36 /lib/systemd/system/runlevel0.target -> poweroff.target
lrwxrwxrwx. 1 root root 13 2月  24 14:36 /lib/systemd/system/runlevel1.target -> rescue.target
lrwxrwxrwx. 1 root root 17 2月  24 14:36 /lib/systemd/system/runlevel2.target -> multi-user.target
lrwxrwxrwx. 1 root root 17 2月  24 14:36 /lib/systemd/system/runlevel3.target -> multi-user.target
lrwxrwxrwx. 1 root root 17 2月  24 14:36 /lib/systemd/system/runlevel4.target -> multi-user.target
lrwxrwxrwx. 1 root root 16 2月  24 14:36 /lib/systemd/system/runlevel5.target -> graphical.target
lrwxrwxrwx. 1 root root 13 2月  24 14:36 /lib/systemd/system/runlevel6.target -> reboot.target

2/3/4级别都是一样的,default.target是默认启动级别

[root@centos7 ~]# ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target


systemctl管理服务

查看所有服务

[root@centos7 ~]# systemctl list-unit-files
UNIT FILE                                   STATE   
proc-sys-fs-binfmt_misc.automount           static  
dev-hugepages.mount                         static  
dev-mqueue.mount                            static  
proc-sys-fs-binfmt_misc.mount               static  
sys-fs-fuse-connections.mount               static  
sys-kernel-config.mount                     static  
sys-kernel-debug.mount                      static  
tmp.mount                                   disabled
brandbot.path                               disabled
systemd-ask-password-console.path           static  
systemd-ask-password-plymouth.path          static  
systemd-ask-password-wall.path              static  
session-1.scope                             static  
session-2.scope                             static  
session-3.scope                             static  
auditd.service                              enabled
autovt@.service                             disabled
blk-availability.service                    disabled
brandbot.service                            static  
console-getty.service                       disabled
console-shell.service                       disabled
container-getty@.service                    static 

......


查看开机自启的服务

[root@centos7 ~]# systemctl list-unit-files | grep enabled
auditd.service                              enabled
crond.service                               enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service  enabled
getty@.service                              enabled
irqbalance.service                          enabled
kdump.service                               enabled
microcode.service                           enabled
NetworkManager-dispatcher.service           enabled
NetworkManager.service                      enabled
postfix.service                             enabled
rsyslog.service                             enabled
sshd.service                                enabled
systemd-readahead-collect.service           enabled
systemd-readahead-drop.service              enabled
systemd-readahead-replay.service            enabled
tuned.service                               enabled
default.target                              enabled
multi-user.target                           enabled
remote-fs.target                            enabled


设置sshd为开机自启

[root@centos7 ~]# systemctl enable sshd
Created symlink from /etc/systemd/system/multi-user.target.wants/sshd.service to /usr/lib/systemd/system/sshd.service.

禁止sshd开机自启

[root@centos7 ~]# systemctl disable sshd
Removed symlink /etc/systemd/system/multi-user.target.wants/sshd.service.


启动vsftpd服务

[root@centos7 ~]# systemctl start vsftpd
[root@centos7 ~]# systemctl status vsftpd
● vsftpd.service - Vsftpd ftp daemon
   Loaded: loaded (/usr/lib/systemd/system/vsftpd.service; disabled; vendor preset: disabled)
   Active: active (running) since 三 2016-02-24 15:37:31 CST; 11s ago
  Process: 9847 ExecStart=/usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf (code=exited, status=0/SUCCESS)
 Main PID: 9848 (vsftpd)
   CGroup: /system.slice/vsftpd.service
           └─9848 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf

2月 24 15:37:31 centos7 systemd[1]: Starting Vsftpd ftp daemon...
2月 24 15:37:31 centos7 systemd[1]: Started Vsftpd ftp daemon.

停止vsftpd服务

[root@centos7 ~]# systemctl stop vsftpd
[root@centos7 ~]# systemctl status vsftpd
● vsftpd.service - Vsftpd ftp daemon
   Loaded: loaded (/usr/lib/systemd/system/vsftpd.service; disabled; vendor preset: disabled)
   Active: inactive (dead)

2月 24 15:37:31 centos7 systemd[1]: Starting Vsftpd ftp daemon...
2月 24 15:37:31 centos7 systemd[1]: Started Vsftpd ftp daemon.
2月 24 15:38:05 centos7 systemd[1]: Stopping Vsftpd ftp daemon...
2月 24 15:38:05 centos7 systemd[1]: Stopped Vsftpd ftp daemon.

查看vsftpd服务的状态

[root@centos7 ~]# systemctl status vsftpd
● vsftpd.service - Vsftpd ftp daemon
   Loaded: loaded (/usr/lib/systemd/system/vsftpd.service; disabled; vendor preset: disabled)
   Active: inactive (dead)

2月 24 15:37:31 centos7 systemd[1]: Starting Vsftpd ftp daemon...
2月 24 15:37:31 centos7 systemd[1]: Started Vsftpd ftp daemon.
2月 24 15:38:05 centos7 systemd[1]: Stopping Vsftpd ftp daemon...
2月 24 15:38:05 centos7 systemd[1]: Stopped Vsftpd ftp daemon.

查看ip地址

[root@xiaomo ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:8b:07:ee brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.93/23 brd 192.168.1.255 scope global dynamic enp0s3
       valid_lft 2957sec preferred_lft 2957sec
    inet6 fe80::a00:27ff:fe8b:7ee/64 scope link
       valid_lft forever preferred_lft forever

查看网络接口统计信息

[root@xiaomo ~]# ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    RX: bytes  packets  errors  dropped overrun mcast   
    0          0        0       0       0       0       
    TX: bytes  packets  errors  dropped carrier collsns
    0          0        0       0       0       0       
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 08:00:27:8b:07:ee brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast   
    30226996   27412    0       0       0       3       
    TX: bytes  packets  errors  dropped carrier collsns
    1142346    14641    0       0       0       0       


查看路由

[root@xiaomo ~]# ip route
default via 192.168.1.1 dev enp0s3  proto static  metric 100
192.168.0.0/23 dev enp0s3  proto kernel  scope link  src 192.168.1.93  metric 100


[root@xiaomo ~]# ip route | column -t
default         via  192.168.1.1  dev    enp0s3  proto  static  metric  100
192.168.0.0/23  dev  enp0s3       proto  kernel  scope  link    src     192.168.1.93  metric  100

添加静态路由(临时)

[root@xiaomo ~]# ip route add 10.10.0.0/24 via 192.168.1.1 dev enp0s3
[root@xiaomo ~]# ip route | column -t
default         via  192.168.1.1  dev    enp0s3  proto  static  metric  100
10.10.0.0/24    via  192.168.1.1  dev    enp0s3
192.168.0.0/23  dev  enp0s3       proto  kernel  scope  link    src     192.168.1.93  metric  100


删除静态路由

[root@xiaomo ~]# ip route del 10.10.0.0/24
[root@xiaomo ~]# ip route | column -t
default         via  192.168.1.1  dev    enp0s3  proto  static  metric  100
192.168.0.0/23  dev  enp0s3       proto  kernel  scope  link    src     192.168.1.93  metric  100


添加静态路由(永久)

[root@xiaomo ~]# echo "10.10.0.0/24 via 192.168.1.1 dev enp0s3" >> /etc/sysconfig/network-scripts/route-enp0s3
[root@xiaomo ~]# cat /etc/sysconfig/network-scripts/route-enp0s3
10.10.0.0/24 via 192.168.1.1 dev enp0s3

删除静态路由

[root@xiaomo ~]# rm -f /etc/sysconfig/network-scripts/route-enp0s3


ip neighbor代替arp -n

[root@xiaomo ~]# ip nei
192.168.1.121 dev enp0s3 lladdr 28:d2:44:60:bd:b9 REACHABLE
192.168.1.1 dev enp0s3 lladdr 3c:8c:40:9b:cc:79 STALE
192.168.1.105 dev enp0s3 lladdr ac:bc:32:93:af:0b STALE
192.168.1.163 dev enp0s3 lladdr d4:97:0b:50:c5:1f STALE


[root@xiaomo ~]# ip neighbor
192.168.1.121 dev enp0s3 lladdr 28:d2:44:60:bd:b9 REACHABLE
192.168.1.1 dev enp0s3 lladdr 3c:8c:40:9b:cc:79 STALE
192.168.1.105 dev enp0s3 lladdr ac:bc:32:93:af:0b STALE
192.168.1.163 dev enp0s3 lladdr d4:97:0b:50:c5:1f STALE


ss代替netstat

[root@xiaomo ~]# ss -lnpt
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              
LISTEN     0      128          *:22                       *:*                   users:(("sshd",pid=719,fd=3))
LISTEN     0      128         :::22                      :::*                   users:(("sshd",pid=719,fd=4))

网络配置文件:
/etc/hostname           主机名
/etc/resolv.conf          DNS设置
/etc/sysconfig/network-scripts/            连接配置信息 ifcfg 文件
/etc/NetworkManager/system-connections/    ×××、移动宽带、PPPoE连接


nmtui配置基本网络连接

nmtui 属于curses-based text user interface（文本用户界面),类似 CentOS6 的 setup 工具,但只能编辑连接/启用/禁用连接,更改主机名。


nmcli和其他网络设置

查看连接的设备

[root@xiaomo ~]# nmcli con show
名称    UUID                                  类型            设备   
enp0s3  5c940ebd-d27f-475f-bb7c-f0944aaa4938  802-3-ethernet  enp0s3


[root@xiaomo ~]# nmcli con show enp0s3
connection.id:                          enp0s3
connection.uuid:                        5c940ebd-d27f-475f-bb7c-f0944aaa4938
connection.interface-name:              enp0s3
connection.type:                        802-3-ethernet
connection.autoconnect:                 yes
connection.autoconnect-priority:        0
connection.timestamp:                   1456298282
connection.read-only:                   no
connection.permissions:                 
connection.zone:                        --
connection.master:                      --
connection.slave-type:                  --
connection.autoconnect-slaves:          -1 (default)
connection.secondaries:                 
connection.gateway-ping-timeout:        0
connection.metered:                     未知
802-3-ethernet.port:                    --
802-3-ethernet.speed:                   0
802-3-ethernet.duplex:                  --
802-3-ethernet.auto-negotiate:          yes
802-3-ethernet.mac-address:             --
802-3-ethernet.cloned-mac-address:      --
802-3-ethernet.mac-address-blacklist:   
802-3-ethernet.mtu:                     自动
802-3-ethernet.s390-subchannels:        
802-3-ethernet.s390-nettype:            --
802-3-ethernet.s390-options:            
802-3-ethernet.wake-on-lan:             1 (default)
802-3-ethernet.wake-on-lan-password:    --
ipv4.method:                            auto
ipv4.dns:                               
ipv4.dns-search:                        
ipv4.addresses:                         
ipv4.gateway:                           --
ipv4.routes:                            
ipv4.route-metric:                      -1
ipv4.ignore-auto-routes:                no
ipv4.ignore-auto-dns:                   no
ipv4.dhcp-client-id:                    --
ipv4.dhcp-send-hostname:                yes
ipv4.dhcp-hostname:                     --
ipv4.never-default:                     no
ipv4.may-fail:                          yes
ipv6.method:                            auto
ipv6.dns:                               
ipv6.dns-search:                        
ipv6.addresses:                         
ipv6.gateway:                           --
ipv6.routes:                            
ipv6.route-metric:                      -1
ipv6.ignore-auto-routes:                no
ipv6.ignore-auto-dns:                   no
ipv6.never-default:                     no
ipv6.may-fail:                          yes
ipv6.ip6-privacy:                       -1 (未知)
ipv6.dhcp-send-hostname:                yes
ipv6.dhcp-hostname:                     --
GENERAL.名称:                           enp0s3
GENERAL.UUID:                           5c940ebd-d27f-475f-bb7c-f0944aaa4938
GENERAL.设备:                           enp0s3
GENERAL.状态:                           已激活
GENERAL.默认:                           是
GENERAL.DEFAULT6:                       否
GENERAL.×××:                            否
GENERAL.ZONE:                           --
GENERAL.DBUS-PATH:                      /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/Settings/0
GENERAL.SPEC 对象:                      /
GENERAL.MASTER-PATH:                    --
IP4.地址[1]:                            192.168.1.93/23
IP4.网关:                               192.168.1.1
IP4.DNS[1]:                             202.106.46.151
IP4.DNS[2]:                             202.106.196.115
DHCP4.选项[1]:                          requested_domain_search = 1
DHCP4.选项[2]:                          requested_nis_domain = 1
DHCP4.选项[3]:                          requested_time_offset = 1
DHCP4.选项[4]:                          requested_broadcast_address = 1
DHCP4.选项[5]:                          requested_rfc3442_classless_static_routes = 1
DHCP4.选项[6]:                          requested_classless_static_routes = 1
DHCP4.选项[7]:                          requested_domain_name = 1
DHCP4.选项[8]:                          expiry = 1456301645
DHCP4.选项[9]:                          requested_wpad = 1
DHCP4.选项[10]:                         next_server = 192.168.1.1
DHCP4.选项[11]:                         broadcast_address = 192.168.1.255
DHCP4.选项[12]:                         dhcp_message_type = 5
DHCP4.选项[13]:                         requested_subnet_mask = 1
DHCP4.选项[14]:                         dhcp_lease_time = 3600
DHCP4.选项[15]:                         routers = 192.168.1.1
DHCP4.选项[16]:                         ip_address = 192.168.1.93
DHCP4.选项[17]:                         requested_static_routes = 1
DHCP4.选项[18]:                         requested_interface_mtu = 1
DHCP4.选项[19]:                         requested_nis_servers = 1
DHCP4.选项[20]:                         requested_ntp_servers = 1
DHCP4.选项[21]:                         subnet_mask = 255.255.254.0
DHCP4.选项[22]:                         domain_name_servers = 202.106.46.151 202.106.196.115
DHCP4.选项[23]:                         requested_ms_classless_static_routes = 1
DHCP4.选项[24]:                         requested_routers = 1
DHCP4.选项[25]:                         requested_domain_name_servers = 1
DHCP4.选项[26]:                         network_number = 192.168.0.0
DHCP4.选项[27]:                         requested_host_name = 1
DHCP4.选项[28]:                         dhcp_server_identifier = 192.168.1.1
IP6.地址[1]:                            fe80::a00:27ff:fe8b:7ee/64
IP6.网关:                               


查看设备信息

[root@xiaomo ~]# nmcli dev show enp0s3
GENERAL.设备:                           enp0s3
GENERAL.类型:                           ethernet
GENERAL.硬盘:                           08:00:27:8B:07:EE
GENERAL.MTU:                            1500
GENERAL.状态:                           100 (连接的)
GENERAL.CONNECTION:                     enp0s3
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/2
WIRED-PROPERTIES.容器:                  开
IP4.地址[1]:                            192.168.1.93/23
IP4.网关:                               192.168.1.1
IP4.DNS[1]:                             202.106.46.151
IP4.DNS[2]:                             202.106.196.115
IP6.地址[1]:                            fe80::a00:27ff:fe8b:7ee/64
IP6.网关:                               


友好的显示

[root@xiaomo ~]# nmcli -t -f IP4.ADDRESS dev show enp0s3
IP4.地址[1]:192.168.1.93/23


[root@xiaomo ~]# nmcli con load /etc/sysconfig/network-scripts/ifcfg-enp0s3

[root@xiaomo ~]# nmcli dev connect enp0s3


初次启动

装完机后，开机进系统的界面换了，乍一看以为是两个内核，原来有一个是rescue选择，而且按e后，会发现所有的grub.conf的信息全出来了，好不容易找到内核启动的地方，写了个 1（要进单用户模式），然后进了rescue模式。

字符界面

进系统后，是图形界面，想进字符界面，结果找到/etc/inittab，发现几乎是个空文件，文件中提示想改runlevel的话，可以把 /lib/systemd/system/runlevel*.target 软连到 /etc/systemd/system/default.target下（当然考过来，覆盖也行），试了一下还行，能改到字符界面runlevel3。

配置网络和主机名

然后，想配置网络，进/etc/sysconfig/network-script/一看，我靠，网卡改名了enp1s5，好有趣，配置完网络后改 主机名， 到/etc/sysconfig/network去改名字，发现这个文件也是空的，按原6版本的去修改，重启后没效果，man了一下hostname， 发现7中改名要到/etc/hostname去改名字。

本地yum源和挂载

接着，想配置一个本地yum源，配上后要挂光盘，手动挂上了，然后直接echo“mount ......”到rc.local中，毕竟是启动执行脚本，重启之后竟然没挂上，进去rc.local中看了一下，7中竟然要手动的把chmod +x rc.local, 是的，要手动加执行权限，难道我之前装的6以前的系统中这个都要手动加执行权限，我不记得啊！！！！ 当然，加了权限后，开机后启动执行了rc.local的mount命令。

LVM和xfs

后来，想着装一个lvm玩玩，于是啊就分区，格式化（特意格式化为了xfs），pv，vg，lv一步一步，都没问题，然后想着放大，缩小，这时出问 题了，执行resize2fs时，怎么一直报superblock什么的出错，这是怎么回事，然后man resize2fs一下，发现这命令只支持ext的文件系统，我艹，那我装系统是怎么是lvm的，这个问题我还没解决，应该有解决方法。

dhcp和服务

接着，想着装一个dhcp玩玩，惊奇的发现所有dhcp的包装上之后，不能service dhcpd start，然后发现/etc/init.d/中竟然没一个dhcp类似的东西，毕竟6之前有dhcpd,dhcpd6,dhcrelay的，然后发现 /sbin/dhcpd有启动文件，难道，难道，以后的服务想service启，都要手动自己编？错了，是在/usr/lib/systemd /system/dhcpd.service,还要修改好多，然后加权限，执行service 服务 restart/stop。。。。。。可以，但是指向了systemctl restart/start/stop 服务.service

iptables

又发现iptables这次也不是作为一个服务在/etc/init.d/下面了，/sbin下有；

然后，然后，就没有然后了，或许，真的是或许，发现新东西，再在这个日志上更新吧，真的是或许。

对了，我还发现/etc/sysctl.conf也空了，想做个路由转发都要到/proc/sys/net下