配置指令:
SW1
switch > enable switch # configure terminal switch (config) # hostname sw1 sw1 (config) # vtp domain cisco sw1 (config) # vtp mode server sw1 (config) # vtp password cisco sw1 (config) # exit sw1 # vlan database sw1 (vlan) # vlan 2 sw1 (vlan) # vlan 3 sw1 (vlan) # exit sw1 # configure terminal sw1 (config) # interface range fastethernet 0/1 - 5 sw1 (config-if) # switchport mode trunk sw1 (config-if) # no shutdown sw1 (config-if) # interface range fastethernet 0/3 - 4 sw1 (config-if) # channel-group 1 mode on sw1 (config-if) # exit sw1 (config) # spanning-tree vlan 2 root primary sw1 (config) # spanning-tree vlan 3 root secondby sw1 (config) # exit sw1 # |
SW2
switch > enable switch # configure terminal switch (config) # hostname sw 2 sw2 (config) # vtp domain cisco sw2 (config) # vtp mode server sw2 (config) # vtp password cisco sw2 (config) # interface range fastethernet 0/1 - 5 sw2 (config-if) # switchport mode trunk sw2 (config-if) # no shutdown sw2 (config-if) # interface range fastethernet 0/3 - 4 sw2 (config-if) # channel-group 1 mode on sw2 (config-if) # exit sw2 (config) # spanning-tree vlan 3 root primary sw2 (config)# spanning-tree vlan 2 root secondby sw2 (config) # exit sw2 # |
SW3
switch > enable switch # configure terminal switch (config) # hostname sw 3 sw3 (config) # vtp domain cisco sw3 (config) # vtp mode client sw3 (config) # vtp password cisco sw3 (config) # interface range fastethernet 0/1 - 2 sw3 (config-if) # switchport mode trunk sw3 (config-if) # no shutdown sw3 (config-if) # interface fastethernet 0/3 sw3 (config-if) # switchport mode access sw3 (config-if) # switchport access vlan 2 sw3 (config-if) # spanning-tree portfast sw3 (config-if) # interface fastethernet 0/4 sw3 (config-if) # switchport mode access sw3 (config-if) # switchport access vlan 3 sw3 (config-if) # spanning-tree portfast sw3 (config-if) # exit sw3 (config) # spanning-tree uplinkfast sw3 (config) # spanning-tree vlan3 sw3 (config) # spanning-tree vlan2 sw3 (config) # exit sw3 # |
SW4
switch > enable switch # configure terminal switch (config) # hostname sw 4 sw4 (config) # vtp domain cisco sw4 (config) # vtp mode client sw4 (config) # vtp password cisco sw4 (config) # interface range fastethernet 0/1 - 2 sw4 (config-if) # switchport mode trunk sw4 (config-if) # no shutdown sw4 (config-if) # interface fastethernet 0/3 sw4 (config-if) # switchport mode access sw4 (config-if) # switchport access vlan 2 sw4 (config-if) # spanning-tree portfast sw4 (config-if) # interface fastethernet 0/4 sw4 (config-if) # switchport mode access sw4 (config-if) # switchport access vlan 3 sw4 (config-if) # spanning 每tree portfast sw4 (config-if) # exit sw4 (config) # spanning-tree uplinkfast sw4 (config) # spanning-tree vlan3 sw4 (config) # spanning-tree vlan2 sw4 (config) # exit sw4 # |
R1
router > enable router # configure terminal router (config) # hostname r1 r1 (config) # interface fastethernet 0/0.1 r1 (config-subif) # ip add 192.168.2.254 255.255.255.0 r1 (config-subif) # encapsulation dot1q 2 r1 (config-subif) # standby 2 ip 192.168.2.1 r1 (config-subif) # standby 2 priority 105 r1 (config-subif) # standby 2 preempet r1 (config-subif) # standby 2 track fastethernet 0/1 r1 (config-subif) # interface fastethernet 0/0.2 r1 (config-subif) # ip add 192.168.3.254 255.255.255.0 r1 (config-subif) # encapsulation dot1q 3 r1 (config-subif) # standby 3 ip 192.168.3.1 r1 (config-subif) # standby 3 preempet r1 (config-subif) # standby 3 track fastethernet 0/1 r1 (config-if) # interface fastethernet 0/0 r1 (config-if) # no shutdown r1 (config-if) # interface fastethernet 0/1 r1 (config-if) # ip add 192.168.4.2 255.255.255.0 r1 (config-if) # no shutdown r1 (config-if) # exit r1 (config) # exit r1 # |
R2
router > enable router # configure terminal router (config) # hostname r2 r2 (config) # interface fastethernet 0/0.1 r2 (config-subif) # ip add 192.168.2.253 255.255.255.0 r2 (config-subif) # encapsulation dot1q 2 r2 (config-subif) # standby 2 ip 192.168.2.1 r2 (config-subif) # standby 2 preempet r2 (config-subif) # standby 2 track fastethernet 0/1 r2 (config-subif) # interface fastethernet 0/0.2 r2 (config-subif) # ip add 192.168.3.253 255.255.255.0 r2 (config-subif) # encapsulation dot1q 3 r2 (config-subif) # standby 3 priority 105 r2 (config-subif) # standby 3 preempet r2 (config-subif) # standby 3 ip 192.168.3.1 r2 (config-subif) # standby 3 track fastethernet 0/1 r2 (config-if) # interface fastethernet 0/0 r2 (config-if) # no shutdown r2 (config-if) # interface fastethernet 0/1 r2 (config-if) # ip add 192.168.5.2 255.255.255.0 r2 (config-if) # no shutdown r2 (config-if) # exit r2 (config) # exit r2 # |
R3
router > enable router # configure terminal router (config) # hostname r3 r3 (config) # interface thernet 0/0 r3 (config-if) # ip add 192.168.4.1 255.255.255.0 r3 (config-if) # no shutdown r3 (config) # interface ethernet 0/1 r3 (config-if) # ip add 192.168.5.1 255.255.255.0 r3 (config-if) # no shutdown r3 (config-if) # exit r3 (config) # exit r3 # |
转载于:https://blog.51cto.com/crazylinuxwin/537626