FLUENT 流体计算应用教程

These programs use
IJG Win32 - JPEG co-decoding library with Lossless JPEG Extentions.
IJG: Independent JPEG Group, see http://www.ijg.org/
Lossless JPEG co-decoding extensions: developed by Ken Murchison

GDCM 2.x

http://www.kuhp.kyoto-u.ac.jp/~diag_rad/intro/tech/dicom_tools.html#DOWNLOAD

http://www.softpedia.com/get/Multimedia/Graphic/Image-Convertors/Convert-Amicas-JPEG-2000-to-DICOM.shtml

1. Modern Medicine Takes Simulation to Heart

A fluid structure interaction simulation is performed to capture patient-specific modeling of hypertensive hemodynamics.

对血流动力学来说，工程设备的研究是其研究的关键，它可以受益于流固耦合的仿真模拟。集成了流体，结构，热和电磁分析功能，所有这些功能可以为人们提供一种更好的认知方式，对了解心血管设备如何在人身体内运行是有较大帮助的。同时，这些分析可以为怎样阻止这些设备产生的副作用提供有效的评估。

ANSYS软件收集到可导致血栓形成的血液凝块的重要信息。另一个例子是，在血管成形术手术中使用血管内支架技术可能会产生成血管再狭窄的危险，如果产生炎症则可能会导致血管的再次狭窄甚至血管不在流通。利用ANSYS仿真软件，医疗专业人士能够确定在这个手术过程中动脉壁上的应力分布，然后优化血管内支架的设计，以尽量减少整个手术过程的风险性。

ANSYS FSI

A CAD system is used to turn this skeletal data into a smooth representation of the vessel geometry.

The geometry is imported into ANSYS ICEM CFD software and the Hexa meshing module is used to construct a high-quality hexahedral volume mesh.

The resulting mesh uses an O-grid inflation layer from all walls so that the mesh is nearly orthogonal with excellent control over near-wall spacing.This mesh is used for the CFD component of the FSI simulation, solved using ANSYS CFX software.The quad surface elements from that same mesh are imported into ANSYS as a shell element representation of the vessel. This type of representation is a significant advantage, since it allows investigations in which the vessel wall thickness is varied without the need for geometry modifications or remeshing. A script is used to apply variable shell thickness on a node-by-node basis to the vessel mesh.

For these studies the Arruda–Boyce hyperelastic material model is used. The model parameters were suggested by biomechanical studies of the stress–strain properties of normotensive and hypertensive pulmonary arteries from a rat model and solid-only simulations of human pulmonary arteries. Residual stress is not considered here due to the difficulty of incorporating such effects in clinical models in which direct measur ements within the artery cannot be obtained. The solid model was constrained on the inflow/outflow boundaries. The remaining nodes were allowed to deform in response to applied forces.

Blood is modeled as an incompressible Newtonian fluid with constant dynamic viscosity and the flow is assumed to be laminar. Using the CFX Expression Language (CEL), it was straightforward to implement a time-varying mass flow boundary condition at the fluid inlet with a half-sinusoid profile. Exit boundary conditions were modeled using CEL and a resistive relationship in which the outlet pressure for each branch was determined by multiplying the local instantaneous flow rate by a r esistance factor.

The early results of this pilot study have confirmed the anticipated behavior of the system. Upcoming studies with improved clinical and imaging data will allow validation and refinement of the simulation methodology. Eventually, the clinical use of non-invasive, patient-specific simulation may provide better under-standing of the progression of PAH and improved predictions of the potential outcomes of available treatments.

2. Designing with Heart
CFD-based design optimization for a miniature ventricular assist implant can shave years off the medical device development cycle

3.Expanding Stent Knowledge

Simulation provides the medical industry with a closer look at stent procedures.

Multiphysics: fully integrated two-way fluid structure interaction including moving/deforming domains; electromagnetic; acoustic

Fluid Simulation Tools: gas/fluid flow analysis including flow in porous media; chemical and biological agents transport; heat transfer; multiphase flow

These surfaces are imported into meshing software from ANSYS and meshed using the hex-core approach. The team then used ANSYS FLUENT technology to model blood flow in the connection region.

For example, one could examine the effect of changes in wall geometry to predict the overall flow pattern and energy loss

转载于:https://www.cnblogs.com/iamgoodman/p/3271552.html

weixin_34174132

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
FLUENT 流体计算应用教程

温正清华大学出版２０１３.１子谓颜渊曰，用之则行，舍之则藏，惟我与尔有是夫！非常合适的一本书．直到今天我才发现原来我需要的不是ansys. fluent 的基本分析过程： 3d,dp,pbns,lam: ３Ｄ版本，双精度，基于...
复制链接

扫一扫