CMSIS-SVD Example (Schema Version 1.1)

最新推荐文章于 2024-08-22 09:13:12 发布
最新推荐文章于 2024-08-22 09:13:12 发布
阅读量199 收藏 1
点赞数
文章标签： 嵌入式 
<?xml version="1.0" encoding="utf-8"?>

<!-- File naming: <vendor>_<part/series name>.svd -->

<!--
  Copyright (C) 2012 ARM Limited. All rights reserved.

  Purpose: System Viewer Description (SVD) Example (Schema Version 1.1)
           This is a description of a none-existent and incomplete device
           for demonstration purposes only.
 -->
 
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd" >
  <vendor>ARM Ltd.</vendor>                                       <!-- device vendor name -->
  <vendorID>ARM</vendorID>                                        <!-- device vendor short name -->
  <name>ARMCM3xxx</name>                                          <!-- name of part-->
  <series>ARMCM3</series>                                         <!-- device series the device belongs to -->
  <version>1.2</version>                                          <!-- version of this description, adding CMSIS-SVD 1.1 tags -->
  <description>ARM 32-bit Cortex-M3 Microcontroller based device, CPU clock up to 80MHz, etc. </description>
  <licenseText>                                                   <!-- this license text will appear in header file. \n force line breaks -->
    ARM Limited (ARM) is supplying this software for use with Cortex-M\n
    processor based microcontroller, but can be equally used for other\n
    suitable  processor architectures. This file can be freely distributed.\n
    Modifications to this file shall be clearly marked.\n
    \n
    THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n
    OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n
    ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR\n
    CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
  </licenseText>
  <cpu>                                                           <!-- details about the cpu embedded in the device -->
    <name>CM3</name>
    <revision>r1p0</revision>
    <endian>little</endian>
    <mpuPresent>true</mpuPresent>
    <fpuPresent>false</fpuPresent>
    <nvicPrioBits>3</nvicPrioBits>
    <vendorSystickConfig>false</vendorSystickConfig>
  </cpu>
  <addressUnitBits>8</addressUnitBits>                            <!-- byte addressable memory -->
  <width>32</width>                                               <!-- bus width is 32 bits -->
  <!-- default settings implicitly inherited by subsequent sections -->
  <size>32</size>                                                 <!-- this is the default size (number of bits) of all peripherals
                                                                       and register that do not define "size" themselves -->
  <access>read-write</access>                                     <!-- default access permission for all subsequent registers -->
  <resetValue>0x00000000</resetValue>                             <!-- by default all bits of the registers are initialized to 0 on reset -->
  <resetMask>0xFFFFFFFF</resetMask>                               <!-- by default all 32Bits of the registers are used -->

  <peripherals>
    <!-- Timer 0 -->
    <peripheral>
      <name>TIMER0</name>
      <version>1.0</version>
      <description>32 Timer / Counter, counting up or down from different sources</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x40010000</baseAddress>
      <size>32</size>
      <access>read-write</access>

      <addressBlock>
        <offset>0</offset>
        <size>0x100</size>
        <usage>registers</usage>
      </addressBlock>

      <interrupt>
        <name>TIMER0</name>
        <value>0</value>
      </interrupt>

      <registers>
      <!-- CR: Control Register -->
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0x1337F7F</resetMask>

          <fields>
            <!-- EN: Enable -->
            <field>
              <name>EN</name>
              <description>Enable</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Timer is disabled and does not operate</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Timer is enabled and can operate</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- RST: Reset -->
            <field>
              <name>RST</name>
              <description>Reset Timer</description>
              <bitRange>[1:1]</bitRange>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Reserved</name>
                  <description>Write as ZERO if necessary</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Reset_Timer</name>
                  <description>Reset the Timer</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- CNT: Counting Direction -->
            <field>
              <name>CNT</name>
              <description>Counting direction</description>
              <bitRange>[3:2]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Count_UP</name>
                  <description>Timer Counts UO and wraps, if no STOP condition is set</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Count_DOWN</name>
                  <description>Timer Counts DOWN and wraps, if no STOP condition is set</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Toggle</name>
                  <description>Timer Counts up to MAX, then DOWN to ZERO, if no STOP condition is set</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- MODE: Operation Mode -->
            <field>
              <name>MODE</name>
              <description>Operation Mode</description>
              <bitRange>[6:4]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Continous</name>
                  <description>Timer runs continously</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Single_ZERO_MAX</name>
                  <description>Timer counts to 0x00 or 0xFFFFFFFF (depending on CNT) and stops</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Single_MATCH</name>
                  <description>Timer counts to the Value of MATCH Register and stops</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Reload_ZERO_MAX</name>
                  <description>Timer counts to 0x00 or 0xFFFFFFFF (depending on CNT), loads the RELOAD Value and continues</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Reload_MATCH</name>
                  <description>Timer counts to the Value of MATCH Register, loads the RELOAD Value and continues</description>
                  <value>4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- PSC: Use Prescaler -->
            <field>
              <name>PSC</name>
              <description>Use Prescaler</description>
              <bitRange>[7:7]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Prescaler is not used</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Prescaler is used as divider</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- CNTSRC: Timer / Counter Soruce Divider -->
            <field>
              <name>CNTSRC</name>
              <description>Timer / Counter Source Divider</description>
              <bitRange>[11:8]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CAP_SRC</name>
                  <description>Capture Source is used directly</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div2</name>
                  <description>Capture Source is divided by 2</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div4</name>
                  <description>Capture Source is divided by 4</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div8</name>
                  <description>Capture Source is divided by 8</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div16</name>
                  <description>Capture Source is divided by 16</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div32</name>
                  <description>Capture Source is divided by 32</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div64</name>
                  <description>Capture Source is divided by 64</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div128</name>
                  <description>Capture Source is divided by 128</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP_SRC_div256</name>
                  <description>Capture Source is divided by 256</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- CAPSRC: Timer / COunter Capture Source -->
            <field>
              <name>CAPSRC</name>
              <description>Timer / Counter Capture Source</description>
              <bitRange>[15:12]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CClk</name>
                  <description>Core Clock</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_0</name>
                  <description>GPIO A, PIN 0</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_1</name>
                  <description>GPIO A, PIN 1</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_2</name>
                  <description>GPIO A, PIN 2</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_3</name>
                  <description>GPIO A, PIN 3</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_4</name>
                  <description>GPIO A, PIN 4</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_5</name>
                  <description>GPIO A, PIN 5</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_6</name>
                  <description>GPIO A, PIN 6</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOA_7</name>
                  <description>GPIO A, PIN 7</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOB_0</name>
                  <description>GPIO B, PIN 0</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOB_1</name>
                  <description>GPIO B, PIN 1</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOB_2</name>
                  <description>GPIO B, PIN 2</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOB_3</name>
                  <description>GPIO B, PIN 3</description>
                  <value>12</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOC_0</name>
                  <description>GPIO C, PIN 0</description>
                  <value>13</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOC_5</name>
                  <description>GPIO C, PIN 1</description>
                  <value>14</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>GPIOC_6</name>
                  <description>GPIO C, PIN 2</description>
                  <value>15</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- CAPEDGE: Capture Edge -->
            <field>
              <name>CAPEDGE</name>
              <description>Capture Edge, select which Edge should result in a counter increment or decrement</description>
              <bitRange>[17:16]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Only rising edges result in a counter increment or decrement</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Only falling edges  result in a counter increment or decrement</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BOTH</name>
                  <description>Rising and falling edges result in a counter increment or decrement</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- TRGEXT: Triggers an other Peripheral -->
            <field>
              <name>TRGEXT</name>
              <description>Triggers an other Peripheral</description>
              <bitRange>[21:20]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No Trigger is emitted</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DMA1</name>
                  <description>DMA Controller 1 is triggered, dependant on MODE</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DMA2</name>
                  <description>DMA Controller 2 is triggered, dependant on MODE</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UART</name>
                  <description>UART is triggered, dependant on MODE</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- Reload: Selects Reload Register n -->
            <field>
              <name>RELOAD</name>
              <description>Select RELOAD Register n to reload Timer on condition</description>
              <bitRange>[25:24]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RELOAD0</name>
                  <description>Selects Reload Register number 0</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD1</name>
                  <description>Selects Reload Register number 1</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD2</name>
                  <description>Selects Reload Register number 2</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD3</name>
                  <description>Selects Reload Register number 3</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- IDR: Inc or dec Reload Register Selection -->
            <field>
              <name>IDR</name>
              <description>Selects, if Reload Register number is incremented, decremented or not modified</description>
              <bitRange>[27:26]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>KEEP</name>
                  <description>Reload Register number does not change automatically</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INCREMENT</name>
                  <description>Reload Register number is incremented on each match</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENT</name>
                  <description>Reload Register number is decremented on each match</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- START: Starts / Stops the Timer/Counter -->
            <field>
              <name>S</name>
              <description>Starts and Stops the Timer / Counter</description>
              <bitRange>[31:31]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>STOP</name>
                  <description>Timer / Counter is stopped</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>START</name>
                  <description>Timer / Counter is started</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>

        <!-- SR: Status Register -->
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x04</addressOffset>
          <size>16</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xD701</resetMask>

          <fields>
            <!-- RUN: Shows if Timer is running -->
            <field>
              <name>RUN</name>
              <description>Shows if Timer is running or not</description>
              <bitRange>[0:0]</bitRange>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Stopped</name>
                  <description>Timer is not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>Timer is running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- MATCH: Shows if a Match was hit -->
            <field>
              <name>MATCH</name>
              <description>Shows if the MATCH was hit</description>
              <bitRange>[8:8]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>No_Match</name>
                  <description>The MATCH condition was not hit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Match_Hit</name>
                  <description>The MATCH condition was hit</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- UN: Shows if an underflow occured -->
            <field>
              <name>UN</name>
              <description>Shows if an underflow occured. This flag is sticky</description>
              <bitRange>[9:9]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>No_Underflow</name>
                  <description>No underflow occured since last clear</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Underflow</name>
                  <description>A minimum of one underflow occured since last clear</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- OV: Shows if an overflow occured -->
            <field>
              <name>OV</name>
              <description>Shows if an overflow occured. This flag is sticky</description>
              <bitRange>[10:10]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>No_Overflow</name>
                  <description>No overflow occured since last clear</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Overflow_occured</name>
                  <description>A minimum of one overflow occured since last clear</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- RST: Shows if Timer is in RESET state -->
            <field>
              <name>RST</name>
              <description>Shows if Timer is in RESET state</description>
              <bitRange>[12:12]</bitRange>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ready</name>
                  <description>Timer is not in RESET state and can operate</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>In_Reset</name>
                  <description>Timer is in RESET state and can not operate</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- RELOAD: Shows the currently active Reload Register -->
            <field>
              <name>RELOAD</name>
              <description>Shows the currently active RELOAD Register</description>
              <bitRange>[15:14]</bitRange>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RELOAD0</name>
                  <description>Reload Register number 0 is active</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD1</name>
                  <description>Reload Register number 1 is active</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD2</name>
                  <description>Reload Register number 2 is active</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD3</name>
                  <description>Reload Register number 3 is active</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>

        <!-- INT: Interrupt Register -->
        <register>
          <name>INT</name>
          <description>Interrupt Register</description>
          <addressOffset>0x10</addressOffset>
          <size>16</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0x0771</resetMask>

          <fields>
            <!-- EN: Interrupt Enable -->
            <field>
              <name>EN</name>
              <description>Interrupt Enable</description>
              <bitRange>[0:0]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Timer does not generate Interrupts</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Timer triggers the TIMERn Interrupt</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>

            <!-- MODE: Interrupt Mode -->
            <field>
              <name>MODE</name>
              <description>Interrupt Mode, selects on which condition the Timer should generate an Interrupt</description>
              <bitRange>[6:4]</bitRange>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Match</name>
                  <description>Timer generates an Interrupt when the MATCH condition is hit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Underflow</name>
                  <description>Timer generates an Interrupt when it underflows</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Overflow</name>
                  <description>Timer generates an Interrupt when it overflows</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>

        <!-- COUNT: Counter Register -->
        <register>
          <name>COUNT</name>
          <description>The Counter Register reflects the actual Value of the Timer/Counter</description>
          <addressOffset>0x20</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xFFFFFFFF</resetMask>
        </register>

        <!-- MATCH: Match Register -->
        <register>
          <name>MATCH</name>
          <description>The Match Register stores the compare Value for the MATCH condition</description>
          <addressOffset>0x24</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xFFFFFFFF</resetMask>
        </register>
        
        <!-- PRESCALE: Prescale Read Register -->
        <register>
          <name>PRESCALE_RD</name>
          <description>The Prescale Register stores the Value for the prescaler. The cont event gets divided by this value</description>
          <addressOffset>0x28</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xFFFFFFFF</resetMask>
        </register>
        
        <!-- PRESCALE: Prescale Write Register -->
        <register>
          <name>PRESCALE_WR</name>
          <description>The Prescale Register stores the Value for the prescaler. The cont event gets divided by this value</description>
          <addressOffset>0x28</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xFFFFFFFF</resetMask>
        </register>


        <!-- RELOAD: Array of Reload Register with 4 elements-->
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0,1,2,3</dimIndex>
          <name>RELOAD[%s]</name>
          <description>The Reload Register stores the Value the COUNT Register gets reloaded on a when a condition was met.</description>
          <addressOffset>0x50</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <resetMask>0xFFFFFFFF</resetMask>
        </register>
      </registers>
    </peripheral>

    <!-- Timer 1 -->
    <peripheral derivedFrom="TIMER0">
      <name>TIMER1</name>
      <baseAddress>0x40010100</baseAddress>
      <interrupt>
        <name>TIMER1</name>
        <value>4</value>
      </interrupt>
    </peripheral>

    <!-- Timer 2 -->
    <peripheral derivedFrom="TIMER0">
      <name>TIMER2</name>
      <baseAddress>0x40010200</baseAddress>
      <interrupt>
        <name>TIMER2</name>
        <value>6</value>
      </interrupt>
    </peripheral>
  </peripherals>
</device>

 

weixin_34195364
关注
cmsis-svd, ARM Cortex M of SVDs和相关工具的Aggegration.zip
10-10
cmsis-svd, ARM Cortex M of SVDs和相关工具的Aggegration 基于的包分解存储库 这是什么？这个仓库试图通过两种主要方式向devlopers平台提供价值：提供一个方便的地方来访问和聚合来自多个源的cmsis svd硬件描述。提供使代码生成和基于SVD的工具更易于构建的解析器。 大多数解析
CMSIS-DSP软件库
12-15
**CMSIS-DSP软件库详解** CMSIS-DSP（Cortex Microcontroller Software Interface Standard - Digital Signal Processing）是ARM公司推出的一套针对微控制器优化的数字信号处理库，它旨在为基于ARM Cortex-M系列...
CMSIS-SVD 解析器项目教程
gitblog_00403的博客
08-15 399
CMSIS-SVD 解析器项目教程 项目地址:https://gitcode.com/gh_mirrors/cms/cmsis-svd 1. 项目介绍 CMSIS-SVD（System View Description）是ARM公司推出的一种XML格式，用于规范Cortex-M微控制器系统中的外设内存映射寄存器描述。这个标准旨在让硅供应商提供类似于设备参考手册的详细信息，从外围设备的高级功能到单个...
CMSIS-SVD 开源项目使用教程
最新发布
gitblog_01021的博客
08-22 534
CMSIS-SVD 开源项目使用教程 cmsis-svdAggegration of ARM Cortex-M (and other) CMSIS SVDs and related tools项目地址:https://gitcode.com/gh_mirrors/cm/cmsis-svd 1. 项目的目录结构及介绍 CMSIS-SVD（Cortex Microcontroller Softwar...
CMSIS-SVD 项目教程
gitblog_00088的博客
06-16 327
CMSIS-SVD 项目教程 cmsis-svd 项目地址: https://gitcode.com/gh_mirrors/cms/cmsis-svd 1. 项目的目录结构及介绍 CMSIS-SVD 项目的...
CMSIS-SVD Schema File Ver. 1.1 (draft)
weixin_34129696的博客
10-03 156
http://www.keil.com/pack/doc/cmsis/svd/html/group__schema__1__1__gr.html   &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!-- date: 04.07.2012 Copyright (C) 2011 - 2012 ARM Limited. Al...
CMSIS-SVD Schema File Ver. 1.0
weixin_33915554的博客
10-03 193
&lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!-- date: 07.12.2011 Copyright (C) 2011 - 2012 ARM Limited. All rights reserved. Redistribution and use in source and binary forms, ...
CMSIS-SVD Reference
weixin_34004750的博客
10-03 354
http://www.keil.com/pack/doc/cmsis/svd/html/modules.html SVD File Schema Levels Device Level　　Peripherals Level　　　　Registers Level　　　　　　Fields Level　　　　　　　　Enumerated Values Level    CMSIS-SVD S...
CMSIS-SVD：微控制器系统接口模型标准化
gitblog_00081的博客
04-09 536
CMSIS-SVD：微控制器系统接口模型标准化 项目地址:https://gitcode.com/gh_mirrors/cms/cmsis-svd CMSIS-SVD（Cortex Microcontroller Software Interface Standard - System View Description）是一个开放的标准，用于描述微控制器硬件资源的软件可见部分，由ARM公司维护并在...
CMSIS-DAP:STM32设备上的ARM CMSIS-DAP调试器固件
05-04
CMSIS-DAP用户手册 概述 CMSIS-DAP提供了一种通过USB访问ARM Cortex M0 M0 + M3 M4 MCU的Coresight调试访问端口（DAP）的标准化方法。 它提供了从开发板到一侧上运行在主机上的调试器的直接USB连接，并通过JTAG或SWD...
RISC-V SVD 文件生成工具
10-03
RISC-V SVD 文件生成工具。详细说明见博文 RISC-V 之一 使用 ARM CMSIS 的 SVD 文件辅助调试 https://itexp.blog.csdn.net/article/details/127144450
svd2ada:SVD描述中的Ada绑定生成器，用于裸板ARM设备
05-22
svd2ada SVD2Ada是CMSIS-SVD描述中针对ARM Cortex-M设备的Ada绑定生成器。 它旨在简化，增强和加速这些平台的驱动程序开发。 建造 要构建SVD2Ada您需要一个本地GNAT编译器，例如，您可以在找到的GNAT社区版。 安装GNAT之后，您可以使用以下命令进行构建： $ gprbuild -P svd2ada.gpr 用法 要运行SVD2Ada您至少需要指定要从其生成代码的SVD文件，以及要在其中生成代码的输出目录。 $ svd2ada <SVD> -o <OUTPUT> 使用--help显示有关可用的不同代码生成选项的信息： $ svd2ada --help
CMSIS-DAP使用说明及驱动.rar
06-10
CMSIS-DAP（Core Middleware for Device Access via SWD and JTAG）是ARM公司推出的一套软件接口标准，用于通过SWD（Serial Wire Debug）和JTAG（Joint Test Action Group）接口进行微控制器的调试和编程。...
STM32F103C8T6_CMSIS-DAP_SWO-master20200509.zip
06-18
本项目"STM32F103C8T6_CMSIS-DAP_SWO-master20200509.zip"显然是关于如何将STLINK（STMicroelectronics的原厂调试工具）改造为符合CMSIS-DAP标准的自制调试器，并且可能利用了SWO（Serial Wire Output）功能。...
CMSIS-SVD 系统视图说明
weixin_33722405的博客
10-02 697
CMSIS 到底是什么？ 先来看看ARM公司对CMSIS的定义： ARM® Cortex™ 微控制器软件接口标准 (CMSIS) 是 Cortex-M 处理器系列的与供应商无关的硬件抽象层。 CMSIS 可实现与处理器和外设之间的一致且简单的软件接口，从而简化软件的重用，缩短微控制器开发人员新手的学习过程，并缩短新设备的上市时间。 软件的创建是嵌入式产品行业的一个主要成本因素。通过跨所有 ...
芯片svd文件生成
weixin_43673603的博客
02-14 1248
【代码】芯片svd文件生成。
CMSIS-SVD 解析器：构建高效ARM平台开发的利器
gitblog_00086的博客
05-15 541
CMSIS-SVD 解析器：构建高效ARM平台开发的利器 项目地址:https://gitcode.com/gh_mirrors/cm/cmsis-svd 项目介绍 CMSIS-SVD解析器是一个开源项目，旨在为针对ARM平台的开发者提供便利。这个项目包含了多种语言的解析器，可以将系统视图描述（System View Description，简称SVD）文件转化为更易于使用的数据结构。通过这种方式...
TIH64 之一 编写 TIH64Vx690 的 SVD 文件及使用 SVD 辅助调试
技术干货
10-04 3857
TIH64Vx690 是方寸微电子研发的高安全、高可靠的 RISC-V 架构的微处理器系列芯片，重点面向网络安全领域，提供安全的单芯片解决方案。TIH64Vx690 提供了 Linux SDK 和 BareMetal SDK，使用芯来的 NucleiStudio 作为集成开发环境。在使用中发现，相比于 ARM 架构，RISC-V 架构的相关基础设施要差了不少，在代码调试时尤为明显！类比于 ARM，突然想到了 SVD 文件用于 RISC-V 是否可行
CMSIS-RTOS系统展示与介绍
资源摘要信息:"CMSIS-RTOS介绍" CMSIS-RTOS（Cortex Microcontroller Software Interface Standard - Real Time Operating System）是一个由ARM公司推出的标准实时操作系统接口。该标准旨在简化针对基于ARM Cortex-...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值