sphinx应用(三)---sphinx分布式, XML数据源, Gearman, UpdateAttributes

为什么80%的码农都做不了架构师？>>>   

sphinx应用(三)---sphinx分布式, XML数据源, Gearman, UpdateAttributes 一.说明 本文涉及到sphinx分布式配置，XML数据源，mysql触发器，任务分发系统gearman以及sphinx属性更改。数据依赖之前写的 sphinx应用(一),sphinx应用(二)，具体请参见： http://www.ttlsa.com/html/category/os/store-system/sphinx-web-application 同时 Gearman的用法参见： http://www.ttlsa.com/html/category/os/distributed-software-systems/distributed-processing-systems/gearman-distributed-processing-systems 如有疑问，烦请更贴说明或加入Q群: 39514058 MVA的属性更改不会刷新到磁盘上。 二.分布式索引 对于大量的数据，分布式索引将会是非常有用的。如果是单一索引，性能将急剧下降，索引查询时间增大，每秒处理数量降低。 同时，如果索引数据大于服务器内存大小，将会导致sphinx无法启动的。 启动分布式索引，将index块type选项设置为distributed。 三.sphinx配置 # vi main_ttlsa.conf //mysql数据源 source ttlsa { type = mysql sql_host = 192.168.1.25 sql_user = root sql_pass = sql_db = ttlsa_com sql_query = SELECT id, title, content, UNIX_TIMESTAMP(publish_date) AS publish_date, author_id ,tags FROM posts sql_attr_uint = author_id sql_attr_multi = uint tags from field sql_attr_timestamp = publish_date sql_query_info = SELECT id, title, content, publish_date, tags, author_id FROM posts WHERE ID=$id } index ttlsa_main //主索引 { source = ttlsa path = /data/sphinx/ttlsa/main docinfo = extern mlock = 0 morphology = none html_strip = 0 min_word_len = 1 min_prefix_len = 0 min_infix_len = 1 ngram_len = 0 charset_type = utf-8 charset_table = 0..9, A..Z->a..z, _, a..z, \ U+410..U+42F->U+430..U+44F, U+430..U+44F ngram_chars = U+3000..U+2FA1F } index master //分布式索引 { type = distributed local = ttlsa_main agent = 127.0.0.1:3313:ttlsa_xml agent_connect_timeout = 1000 agent_query_timeout = 3000 } indexer { mem_limit = 512M } searchd { listen = 3312 listen = 0.0.0.0:4306:mysql41 //mysql协议接口监听地址和端口 log = /data/sphinx/ttlsa/log/searchd_3312.log query_log = /data/sphinx/ttlsa/log/query_3312.log read_timeout = 5 max_children = 200 max_matches = 1000 seamless_rotate = 1 preopen_indexes = 1 unlink_old = 1 max_filter_values = 10000 pid_file = /data/sphinx/ttlsa/log/searchd_3312.pid mva_updates_pool = 16M compat_sphinxql_magics = 0 } # vi ttlsa.pl //构造xml数据 [sourcecode language="perl"] use strict; use XML::Writer; use Sphinx::Search; my $sphinx_server="127.0.0.1"; my $sphinx_port="3312"; my $sph=Sphinx::Search->new(); $sph->SetServer($sphinx_server,$sphinx_port); $sph->SetConnectTimeout(1); $sph->SetConnectRetries(3); $sph->SetSelect("id"); $sph->SetSortMode(SPH_SORT_EXTENDED,'@id desc'); $sph->SetLimits(0,1); my $results = $sph->Query("", 'ttlsa_main'); my $max_id=$results->{'matches'}->[0]->{'id'}; $sph->Close(); my $writer = XML::Writer->new(DATA_MODE => 'true', DATA_INDENT => 2); $writer->xmlDecl('utf-8'); $writer->startTag('sphinx:docset'); $writer->startTag('sphinx:schema'); $writer->emptyTag('sphinx:field', 'name'=>'title'); $writer->emptyTag('sphinx:field', 'name'=>'content'); $writer->emptyTag('sphinx:attr', 'name'=>'publish_date', 'type'=>'timestamp',); $writer->emptyTag('sphinx:attr', 'name'=>'author_id', 'type'=>'int', 'bits'=>'32',); $writer->endTag('sphinx:schema'); $writer->startTag('sphinx:document','id'=>1000); $writer->startTag('title'); $writer->characters('0'); $writer->endTag('title'); $writer->startTag('content'); $writer->characters('0'); $writer->endTag('content'); $writer->startTag('publish_date'); $writer->characters('0'); $writer->endTag('publish_date'); $writer->startTag('author_id'); $writer->characters('0'); $writer->endTag('author_id'); $writer->endTag('sphinx:document'); $writer->endTag('sphinx:docset'); $writer->end(); [/sourcecode] # vi xml_ttlsa.conf //XML数据源 source ttlsa_xml { type = xmlpipe2 xmlpipe_command = perl /usr/local/coreseek4/etc/ttlsa.xml //XML数据流 } index ttlsa_xml { type = plain source = ttlsa_xml path = /data/sphinx/ttlsa/xml docinfo = extern mlock = 0 morphology = none html_strip = 0 min_word_len = 1 min_prefix_len = 0 min_infix_len = 1 ngram_len = 0 charset_type = utf-8 charset_table = 0..9, A..Z->a..z, _, a..z, \ U+410..U+42F->U+430..U+44F, U+430..U+44F ngram_chars = U+3000..U+2FA1F } indexer { mem_limit = 512M } searchd { listen = 3313 listen = 0.0.0.0:9307:mysql41 log = /data/sphinx/ttlsa/log/searchd_3313.log query_log = /data/sphinx/ttlsa/log/query_3313.log read_timeout = 5 max_children = 200 max_matches = 1000 seamless_rotate = 1 preopen_indexes = 1 unlink_old = 1 max_filter_values = 10000 pid_file = /data/sphinx/ttlsa/log/searchd_3313.pid mva_updates_pool = 16M compat_sphinxql_magics = 0 } 将之前的数据表结构更改下。 mysql> alter table posts add `tags` text NOT NULL; mysql> update posts set `tags`="0,0"; 建索引 # /usr/local/coreseek4/bin/indexer --config /usr/local/coreseek4/etc/main_ttlsa.conf --all # /usr/local/coreseek4/bin/indexer --config /usr/local/coreseek4/etc/xml_ttlsa.conf --all 启动服务 # /usr/local/coreseek4/bin/searchd --config /usr/local/coreseek4/etc/main_ttlsa.conf # /usr/local/coreseek4/bin/searchd --config /usr/local/coreseek4/etc/xml_ttlsa.conf 四.Gearman配置 # vi WORKER_UPDATEATTRIBUTES.pl //执行gearman任务 [sourcecode language="perl"]</pre> ################################### ### author: www.ttlsa.com ### ### QQ群: 39514058 ### ### E-mail: service@ttlsa.com ### ################################### use strict; use XML::Writer; use Sphinx::Search; use DBI; use Class::Date qw (date); use Gearman::Worker; use Time::HiRes qw(gettimeofday); my $sphinx_server="127.0.0.1"; my $sphinx_port="3312"; my $driver="DBI:mysql"; my $host="192.168.1.25:3306"; my $dbname="ttlsa_com"; my $user="root"; my $passwd=""; my $worker=new Gearman::Worker; $worker->job_servers('192.168.1.60:4731'); $worker->register_function(UPDAT_EATTRIBUTES=>\&UPDATE_ATTRIBUTES); $worker->work while 1; sub UPDATE_ATTRIBUTES{ my $sph=Sphinx::Search->new(); $sph->SetServer($sphinx_server,$sphinx_port); $sph->SetConnectTimeout(1); $sph->SetConnectRetries(3); $sph->SetFilter('publish_date',[0]); $sph->SetFilter('author_id',[0]); $sph->SetSelect('id'); $sph->SetSortMode(SPH_SORT_EXTENDED,'@id asc'); $sph->SetLimits(0,1); my $start_time=gettimeofday(); my $rt = $sph->Query("", 'master'); my $min_id = $rt->{'matches'}->[0]->{'id'}; my $ct=gettimeofday() - $start_time; print "查询当前最小document ID($min_id)耗时: $ct\n"; $sph->Close(); if($min_id){ my $dbh=DBI->connect("$driver:$dbname:$host","$user","$passwd") or die DBI->errstr; my $sql="select id,author_id,publish_date,tags from posts where id >=$min_id"; my $sth=$dbh->prepare($sql); my $rv=$sth->execute; my $attrs=['author_id','publish_date']; my $values={}; while(my $hash_ref=$sth->fetchrow_hashref){ $values->{$hash_ref->{'id'}}=[$hash_ref->{'author_id'},date($hash_ref->{'publish_date'})->epoch]; } my $start_time=gettimeofday(); my $num=$sph->UpdateAttributes('master',$attrs,$values); my $ct=gettimeofday() - $start_time; print "更改属性耗时: $ct\n"; if(defined($num)){ print "更改属性成功数量: $num\n\n\n"; }else{ print "！！！更改属性失败！！！\n\n\n"; } } } [/sourcecode] 使用MySQL UDFs来调用gearman分布式任务分发系统，具体参见： http://www.ttlsa.com/html/1269.html 如果向数据库插入大量的数据，瞬间将会添加输入数据量的任务。 mysql> SELECT gman_servers_set("192.168.1.60:4731") AS gman_server; +-------------------+ | gman_server | +-------------------+ | 192.168.1.60:4731 | +-------------------+ 1 row in set (0.11 sec) mysql> CREATE TRIGGER insert_posts after INSERT ON posts FOR each row SET @RETURN=gman_do_background('UPDAT_EATTRIBUTES','undef'); Query OK, 0 rows affected (0.08 sec) //创建触发器，当向表posts插入数据时候，添加任务。 五.测试 mysql> insert into posts values ('','xxx','xxxxxxx',1, CURRENT_TIMESTAMP(),"2,2"); gearman任务输出内容如下： 查询当前最小document ID(6)耗时: 0.00577688217163086 更改属性耗时: 0.203788042068481 更改属性成功数量: 1 # mysql -h127.0.0.1 -P4306 mysql> show tables; +------------+-------------+ | Index | Type | +------------+-------------+ | master | distributed | | ttlsa_main | local | +------------+-------------+ 上面我提到过，使用触发器来添加任务，若插入大量的数据的话，瞬间将添加插入的数据量的任务，届时将阻塞之后的任务执行。下面的脚本是插入大量的数据，大家可以测测。 任务数量可以通过一下命名查看 # telnet 192.168.1.60 4731 status # vi insert_data.php [sourcecode language="php"] <?php /* ################################### ### author: www.ttlsa.com ### ### QQ群: 39514058 ### ### E-mail: service@ttlsa.com ### ################################### */ $host="192.168.1.25"; $user="root"; $passwd=""; $dbname="ttlsa_com"; $conn=mysql_connect($host,$user,$passwd) or die(mysql_error()); mysql_select_db($dbname) or die(mysql_error()); $i=1; $count=1000; $val=array(); while($i<=$count){ $publish_date=date("Y-m-d G:i:s"); $author_id=$i; $tags=$i.",".$i; $title=$i; $content=str_pad($i,10,0,STR_PAD_LEFT); $val[].="('{$publish_date}','{$author_id}','{$tags}','{$title}','{$content}')"; $i++; } $st=microtime(true); $sql=" insert into posts (`publish_date`,`author_id`,`tags`,`title`,`content`) values " . implode(",",$val); #mysql_query($sql,$conn) or die(mysql_error()); $num=mysql_affected_rows($conn); $ct=microtime(true) - $st; print "$sql\n"; print "执行耗时： $ct\n"; print "插入行数： $num\n"; print "所耗内存： ".memory_get_usage(true)."kb\n"; print "-----------------------------------\n\n\n"; [/sourcecode] 留下两个问题共大家思索： 1. 如果是delete操作呢？索引又该如何操作？ 2. 如果是update操作呢？索引又该如何操作？

转载于:https://my.oschina.net/766/blog/211232