CCNA(Stand-ALONE)Lab1-Connecting to a Router

Objective: Become familiar with the Cisco Router.
Lab Equipment: Router 1 from the eRouters menu
Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface
1. When the lab has finished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear.

2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the > prompt indicates user mode.

Press Enter to get Started
Router>

3. Next, type the enable command to get to the privileged mode prompt.
Router>enable
Router#

4 . To return to user mode, simply type disable. From user mode, type logout or exit to exit the router.
Router#disable
Router>exit
Router con0 is now available
Press RETURN to get started

************************************************

Next: CCNA(Stand-ALONE)Lab2-Introduction to the Basic User Interface