EIGRP等价负载均衡

EIGRP等价负载均衡

实验拓扑图：

 

实验过程

 

1.R1的预配置

Router>en Router#config t Enter configuration commands, one per line.  End with CNTL/Z. Router(config)#no ip domain-lookup Router(config)#line console 0 Router(config-line)#no exec-timeout Router(config-line)#loggin syn Router(config-line)#exit Router(config)#host R1 R1(config)#interface f0/0 R1(config-if)#no shut R1(config-if)#ip add 192.168.1.1 255.255.255.0 R1(config-if)#exit R1(config)#interface f1/0 R1(config-if)#no shut R1(config-if)#ip add 192.168.3.1 255.255.255.0 R1(config-if)#exit

2.R2的预配置

Router>en Router#config t Enter configuration commands, one per line.  End with CNTL/Z. Router(config)#no ip domain-lookup Router(config)#line console 0 Router(config-line)#no exec-timeout Router(config-line)#loggin syn Router(config-line)#exit Router(config)#host R2 R2(config)#interface f0/0 R2(config-if)#no shut R2(config-if)#ip add 192.168.1.2 255.255.255.0 R2(config-if)#exit R2(config)#interface f1/0 R2(config-if)#no shut R2(config-if)#ip add 192.168.2.1 255.255.255.0 R2(config-if)#exit

3.R3的预配置

Router>en Router#config t Enter configuration commands, one per line.  End with CNTL/Z. Router(config)#no ip domain-lookup Router(config)#line console 0 Router(config-line)#no exec-timeout Router(config-line)#loggin syn Router(config-line)#exit Router(config)#host R3 R3(config)#interface f1/0 R3(config-if)#no shut R3(config-if)#ip add 192.168.3.2 255.255.255.0 R3(config-if)#exit R3(config)#interface f0/0 R3(config-if)#no shut R3(config-if)#ip add 192.168.4.1 255.255.255.0 R3(config-if)#exit

4.R4的预配置

Router>en Router#config t Enter configuration commands, one per line.  End with CNTL/Z. Router(config)#no ip domain-lookup Router(config)#line console 0 Router(config-line)#no exec-timeout Router(config-line)#loggin syn Router(config-line)#exit Router(config)#host R4 R4(config)#interface f1/0 R4(config-if)#no shut R4(config-if)#ip add 192.168.2.2 255.255.255.0 R4(config-if)#exit R4(config)#interface lo0 R4(config-if)#ip add 1.1.1.1 255.255.255.0 R4(config-if)#exit R4(config)#interface f0/0 R4(config-if)#no shut R4(config-if)#ip add 192.168.4.2 255.255.255.0 R4(config-if)#exit

5.R1的EIGRP配置

R1(config)#router eigrp 100 R1(config-router)#network 192.168.1.0 R1(config-router)#network 192.168.3.0 R1(config-router)#no auto R1(config-router)#end

6.R2的 EIGRP配置

R2(config)#router eigrp 100 R2(config-router)#network 192.168.1.0 *Jan  5 20:17:54.731: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.1.1 (FastEthernet0/0) is up: new adjacency  //发现了邻居路由器R1 R2(config-router)#network 192.168.2.0 R2(config-router)#no auto R2(config-router)#end

7.R3 EIGRP配置

R3(config)#router eigrp 100 R3(config-router)#network 192.168.3.0  *Jan  5 20:19:31.859: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.3.1 (FastEthernet1/0) is up: new adjacency  R3(config-router)#network 192.168.4.0 R3(config-router)#no auto R3(config-router)#end

8.R4 EIGRP配置

R4(config)#router eigrp 100 R4(config-router)#network 192.168.2.0 *Jan  5 20:20:44.123: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.2.1 (FastEthernet1/0) is up: new adjacency R4(config-router)#network 192.168.4.0 R4(config-router)#network 1.1.1.0 *Jan  5 20:20:49.787: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.4.1 (FastEthernet0/0) is up: new adjacency R4(config-router)#no auto R4(config-router)#end

9.在R1上查看eigrp的拓扑表和路由表

R1#show ip eigrp topology IP-EIGRP Topology Table for AS(100)/ID(192.168.3.1)   Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,        r - reply Status, s - sia Status   P 1.1.1.0/24, 2 successors, FD is 158720         via 192.168.1.2 (158720/156160), FastEthernet0/0         via 192.168.3.2 (158720/156160), FastEthernet1/0  P 192.168.1.0/24, 1 successors, FD is 28160         via Connected, FastEthernet0/0 P 192.168.2.0/24, 1 successors, FD is 30720         via 192.168.1.2 (30720/28160), FastEthernet0/0 P 192.168.3.0/24, 1 successors, FD is 28160         via Connected, FastEthernet1/0 P 192.168.4.0/24, 1 successors, FD is 30720         via 192.168.3.2 (30720/28160), FastEthernet1/0 R1#show ip route eigrp      1.0.0.0/24 is subnetted, 1 subnets D       1.1.1.0 [90/158720] via 192.168.3.2, 00:03:18, FastEthernet1/0               [90/158720] via 192.168.1.2, 00:03:18, FastEthernet0/0 //R1到R4有两条有效路径，这里R1实现了等价负载均衡 D    192.168.4.0/24 [90/30720] via 192.168.3.2, 00:07:02, FastEthernet1/0 D    192.168.2.0/24 [90/30720] via 192.168.1.2, 00:07:00, FastEthernet0/0

转载于:https://blog.51cto.com/mxn19871215/482827