MySQL MHA高可用环境搭建-CSDN博客

一、安装MHA基本环境

1. 安装MHA node

(1) 基本环境说明，本文参考互联网文章学习，搭建MHA与测试如下。

参考文档：http://www.cnblogs.com/xuanzhi201111/p/4231412.html

角色                IP地址            主机名
=============================================
Master              192.168.1.121     node1
Slave               192.168.1.122     node2
Slave               192.168.1.123     node3
Monitor host        192.168.1.125     node5

(2) 在node1,node2,node3,node5操作：

# vi /etc/hosts

192.168.1.121 node1
192.168.1.122 node2
192.168.1.123 node3
192.168.1.125 node5

安装MHA node节点软件包：

# rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# yum install perl-DBD-MySQL perl-CPAN -y
# tar xf mha4mysql-node-0.56.tar.gz
# cd mha4mysql-node-0.56
# perl Makefile.PL
# make && make install

2. 安装MHA Manager

在node5管理节点上操作：注：MHA Manager主机也是需要安装MHA Node,MHA Manger

# yum install perl-DBD-MySQL perl-CPAN perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager perl-Time-HiRes -y
# tar xf mha4mysql-manager-0.56.tar.gz
# cd mha4mysql-manager-0.56
# perl Makefile.PL
# make && make install

#说明：安装的脚本程序都在/usr/local/bin/目录下。

3. 节点间配置SSH登录无密码验证（MHA主机之间使用key登录）

在node5（Monitor）：

# ssh-keygen -t rsa
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node1
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node2
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node3

在node1（Master）：

# ssh-keygen -t rsa
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node2
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node3
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node5

在node2 (slave)：

# ssh-keygen -t rsa
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node1
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node3
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node5

在node3 (slave)：

# ssh-keygen -t rsa
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node1
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node2
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@node5

二、搭建主从复制环境

1. 主从复制环境配置过程

(1) mysql安装过程略,但是三节点要创建如下链接

node1(主)，node2(主备从）,node3(从)

注意：创建如下链接：
ln -s /usr/local/mysql/bin/* /usr/local/bin/

node1 my.cnf

server-id              = 1
binlog-format          = ROW
log-bin                = master-bin
log-bin-index          = master-bin.index
log-slave-updates      = true
relay_log_purge        = 0

node2 my.cnf

server-id              = 2
binlog-format          = ROW
log-bin                = master-bin
log-bin-index          = master-bin.index
log-slave-updates      = true
relay_log_purge        = 0

node3 my.cnf

binlog-format          = ROW
log-bin                = mysql-bin
relay-log              = slave-relay-bin
relay-log-index        = slave-relay-bin.index
log-slave-updates      = true
server-id              = 11
skip-name-resolve
relay_log_purge        = 0

(2) 在node1 (Master)上备份一份完整的数据：

# mysqldump -uroot -p123456 --master-data=2 --single-transaction -R --triggers -A > all.sql

其中--master-data=2代表备份时刻记录master的Binlog位置和Position。

(3) 在node1 (Master)上创建复制用户:

mysql> grant replication slave on *.* to 'repl'@'192.168.1.%' identified by '123456';
mysql> flush privileges;

(4) 查看主库备份时的binlog名称和位置，MASTER_LOG_FILE和MASTER_LOG_POS：

# head -n 30 all.sql | grep 'CHANGE MASTER TO'

-- CHANGE MASTER TO MASTER_LOG_FILE='master-bin.000004', MASTER_LOG_POS=120;

(5) 把备份复制到192.168.1.122和192.168.1.123

# scp all.sql 192.168.1.122:/root/
# scp all.sql 192.168.1.123:/root/

(6) 分别在两台服务器上导入备份，执行复制相关命令

在node2、node3 主机上操作：

# mysql -uroot -p123456 < all.sql

mysql> stop slave;

CHANGE MASTER TO
MASTER_HOST='192.168.1.121',
MASTER_USER='repl',
MASTER_PASSWORD='123456',
MASTER_LOG_FILE='master-bin.000004',
MASTER_LOG_POS=120;

mysql> start slave;
mysql> show slave status\G

2. 创建MHA管理用户,在master上创建。

mysql> grant all privileges on *.* to 'root'@'192.168.1.%' identified by '123456';
mysql> flush privileges;

三、配置Keepalived VIP

vip配置可以采用两种方式，一种通过keepalived的方式管理虚拟ip的浮动；一人是通过脚本方式，本文通过keepalived方式实现

1. 在node1(Master)与node2（备选主节点）安装keepalived。

# wget http://www.keepalived.org/software/keepalived-1.2.12.tar.gz
# tar xf keepalived-1.2.12.tar.gz
# cd keepalived-1.2.12
# ./configure --prefix=/usr/local/keepalived
# make && make install
# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
# mkdir /etc/keepalived
# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

2. 配置keepalived的配置文件，在node1(master)上配置操作如下:

注：keepalived配置成backup->backup，即IP地址切换后，主起来后IP地址不切换，本文监控脚本由MHA提供，keepalived不提供对mysqld的监控。

# vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
     notification_email {
     abc@163.com
   }
   notification_email_from dba@dbserver.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id MySQL-HA
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 150
    advert_int 1
    nopreempt

    authentication {
    auth_type PASS
    auth_pass 1111
    }

    virtual_ipaddress {
        192.168.1.130
    }
}

3. 配置keepalived的配置文件，在node2(备用节点)上配置操作如下:

# vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
     notification_email {
     abc@163.com
   }
   notification_email_from dba@dbserver.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id MySQL-HA
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 120
    advert_int 1
    nopreempt

    authentication {
    auth_type PASS
    auth_pass 1111
    }

    virtual_ipaddress {
        192.168.1.130
    }
}

4. node1,node2启动keepalived服务

# service keepalived start
# chkconfig keepalived on

5. node1查看VIP启动情况

[root@node1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:4e:53:71 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.121/24 brd 192.168.1.255 scope global eth0
    inet 192.168.1.130/32 scope global eth0
    inet6 fe80::20c:29ff:fe4e:5371/64 scope link
       valid_lft forever preferred_lft forever

四、配置MHA

1. monitor创建MHA的工作目录，并且创建相关配置文件（在软件包解压后的目录里面有样例配置文件）。

# mkdir -p /etc/masterha
# mkdir -p /var/log/masterha/app1
# cp mha4mysql-manager-0.56/samples/conf/app1.cnf /etc/masterha/

修改app1.cnf配置文件，修改后的文件内容如下:

# cat /etc/masterha/app1.cnf

[server default]
manager_workdir=/var/log/masterha/app1
manager_log=/var/log/masterha/app1/manager.log
master_binlog_dir=/usr/local/mysql/data/
master_ip_failover_script= /usr/local/bin/master_ip_failover
master_ip_online_change_script= /usr/local/bin/master_ip_online_change
password=123456
user=root
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=repl
report_script=/usr/local/bin/send_report
ssh_user=root

[server1]
hostname=192.168.1.121
port=3306

[server2]
hostname=192.168.1.122
port=3306
candidate_master=1
check_repl_delay=0

[server3]
hostname=192.168.1.123
port=3306

说明:
master_ip_failover_script= /usr/local/bin/master_ip_failover            #MHA自动切换执行的脚本，需要修改
master_ip_online_change_script= /usr/local/bin/master_ip_online_change  #手动切换需要执行的脚本，需要修改
report_script=/usr/local/bin/send_report                                #切换时发送邮件进行报告，需要修改

2. 设置relay log的清除方式（在每个slave节点上）：

(1)在node2,node3 从节点上操作：

将relay_log_purge=0加入my.cnf配置文件，前面已经配置。

(2) 设置定期清理relay脚本（node2,node3上操作）：

# cat purge_relay_log.sh
#!/bin/bash
user=root
passwd=123456
port=3306
log_dir='/data/masterha/log'
work_dir='/data'
purge='/usr/local/bin/purge_relay_logs'

if [ ! -d $log_dir ]
then
mkdir $log_dir -p
fi

$purge --user=$user --password=$passwd --disable_relay_log_purge --port=$port --workdir=$work_dir >> $log_dir/purge_relay_logs.log 2>&1

配置定时计划任务

# crontab -e
0 4 * * * /bin/bash /root/purge_relay_log.sh

3. 要想把keepalived服务引入MHA，我们只需要修改切换是触发的脚本文件master_ip_failover即可，在该脚本中添加在master发生宕机时对keepalived的处理。

(1) 编辑脚本/usr/local/bin/master_ip_failover，修改后如下:

# vi /usr/local/bin/master_ip_failover
#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';

use Getopt::Long;

my (
    $command,          $ssh_user,        $orig_master_host, $orig_master_ip,
    $orig_master_port, $new_master_host, $new_master_ip,    $new_master_port
);

my $vip = '192.168.1.130';
my $ssh_start_vip = "/etc/init.d/keepalived start";
my $ssh_stop_vip = "/etc/init.d/keepalived stop";

GetOptions(
    'command=s'          => \$command,
    'ssh_user=s'         => \$ssh_user,
    'orig_master_host=s' => \$orig_master_host,
    'orig_master_ip=s'   => \$orig_master_ip,
    'orig_master_port=i' => \$orig_master_port,
    'new_master_host=s' => \$new_master_host,
    'new_master_ip=s'    => \$new_master_ip,
    'new_master_port=i' => \$new_master_port,
);

exit &main();
sub main {
    print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
    if ( $command eq "stop" || $command eq "stopssh" ) {
        my $exit_code = 1;
        eval {
            print "Disabling the VIP on old master: $orig_master_host \n";
            &stop_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn "Got Error: $@\n";
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "start" ) {

        my $exit_code = 10;
        eval {
            print "Enabling the VIP - $vip on the new master - $new_master_host \n";
            &start_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn $@;
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "status" ) {
        print "Checking the Status of the script.. OK \n";
        exit 0;
    }
    else {
        &usage();
        exit 1;
    }
}
sub start_vip() {
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
    print
    "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

(2) 编辑脚本master_ip_online_change，修改后如下:

#!/usr/bin/env perl

# Copyright (C) 2011 DeNA Co.,Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;

my $_tstart;
my $_running_interval = 0.1;
my (
$command,              $orig_master_is_new_slave, $orig_master_host,
$orig_master_ip,       $orig_master_port,         $orig_master_user,
$orig_master_password, $orig_master_ssh_user,     $new_master_host,
$new_master_ip,        $new_master_port,          $new_master_user,
$new_master_password, $new_master_ssh_user
);
my $vip = '192.168.1.130/24';
my $key = '1';
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $orig_master_ssh_port = 22;
my $new_master_ssh_port = 22;
GetOptions(
'command=s'                => \$command,
'orig_master_is_new_slave' => \$orig_master_is_new_slave,
'orig_master_host=s'       => \$orig_master_host,
'orig_master_ip=s'         => \$orig_master_ip,
'orig_master_port=i'       => \$orig_master_port,
'orig_master_user=s'       => \$orig_master_user,
'orig_master_password=s'   => \$orig_master_password,
'orig_master_ssh_user=s'   => \$orig_master_ssh_user,
'new_master_host=s'        => \$new_master_host,
'new_master_ip=s'          => \$new_master_ip,
'new_master_port=i'        => \$new_master_port,
'new_master_user=s'        => \$new_master_user,
'new_master_password=s'    => \$new_master_password,
'new_master_ssh_user=s'    => \$new_master_ssh_user,
'orig_master_ssh_port=i'    => \$orig_master_ssh_port,
'new_master_ssh_port=i'    => \$new_master_ssh_port,
);

exit &main();

sub current_time_us {
my ( $sec, $microsec ) = gettimeofday();
my $curdate = localtime($sec);
return $curdate . " " . sprintf( "%06d", $microsec );
}

sub sleep_until {
my $elapsed = tv_interval($_tstart);
if ( $_running_interval > $elapsed ) {
sleep( $_running_interval - $elapsed );
}
}

sub get_threads_util {
my $dbh                    = shift;
my $my_connection_id       = shift;
my $running_time_threshold = shift;
my $type                   = shift;
$running_time_threshold = 0 unless ($running_time_threshold);
$type                   = 0 unless ($type);
my @threads;

my $sth = $dbh->prepare("SHOW PROCESSLIST");
$sth->execute();

while ( my $ref = $sth->fetchrow_hashref() ) {
    my $id         = $ref->{Id};
    my $user       = $ref->{User};
    my $host       = $ref->{Host};
    my $command    = $ref->{Command};
    my $state      = $ref->{State};
    my $query_time = $ref->{Time};
    my $info       = $ref->{Info};
    $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
    next if ( $my_connection_id == $id );
    next if ( defined($query_time) && $query_time < $running_time_threshold );
    next if ( defined($command)    && $command eq "Binlog Dump" );
    next if ( defined($user)       && $user eq "system user" );
    next
      if ( defined($command)
      && $command eq "Sleep"
      && defined($query_time)
      && $query_time >= 1 );

    if ( $type >= 1 ) {
      next if ( defined($command) && $command eq "Sleep" );
      next if ( defined($command) && $command eq "Connect" );
    }

    if ( $type >= 2 ) {
      next if ( defined($info) && $info =~ m/^select/i );
      next if ( defined($info) && $info =~ m/^show/i );
    }

push @threads, $ref;
}
return @threads;
}

sub main {
if ( $command eq "stop" ) {
    ## Gracefully killing connections on the current master
    # 1. Set read_only= 1 on the new master
    # 2. DROP USER so that no app user can establish new connections
    # 3. Set read_only= 1 on the current master
    # 4. Kill current queries
    # * Any database access failure will result in script die.
    my $exit_code = 1;
    eval {
      ## Setting read_only=1 on the new master (to avoid accident)
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error(die_on_error)_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );
      print current_time_us() . " Set read_only on the new master.. ";
      $new_master_handler->enable_read_only();
      if ( $new_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }
      $new_master_handler->disconnect();

      # Connecting to the orig master, die if any database error happens
      my $orig_master_handler = new MHA::DBHelper();
      $orig_master_handler->connect( $orig_master_ip, $orig_master_port,
        $orig_master_user, $orig_master_password, 1 );

      ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
      $orig_master_handler->disable_log_bin_local();
      print current_time_us() . " Drpping app user on the orig master..\n";
      #FIXME_xxx_drop_app_user($orig_master_handler);

      ## Waiting for N * 100 milliseconds so that current connections can exit
      my $time_until_read_only = 15;
      $_tstart = [gettimeofday];
      my @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_read_only > 0 && $#threads >= 0 ) {
        if ( $time_until_read_only % 5 == 0 ) {
          printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_read_only * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_read_only--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Setting read_only=1 on the current master so that nobody(except SUPER) can write
      print current_time_us() . " Set read_only=1 on the orig master.. ";
      $orig_master_handler->enable_read_only();
      if ( $orig_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }

      ## Waiting for M * 100 milliseconds so that current update queries can complete
      my $time_until_kill_threads = 5;
      @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
        if ( $time_until_kill_threads % 5 == 0 ) {
          printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_kill_threads--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Terminating all threads
      print current_time_us() . " Killing all application threads..\n";
      $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
      print current_time_us() . " done.\n";
      $orig_master_handler->enable_log_bin_local();
      $orig_master_handler->disconnect();

      ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
      eval {
      `ssh -p$orig_master_ssh_port $orig_master_ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
        };
        if ($@) {
            warn $@;
        }
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
}
elsif ( $command eq "start" ) {
    ## Activating master ip on the new master
    # 1. Create app user with write privileges
    # 2. Moving backup script if needed
    # 3. Register new master's ip to the catalog database

# We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery.
# If exit code is 0 or 10, MHA does not abort
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print current_time_us() . " Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      print current_time_us() . " Creating app user on the new master..\n";
      #FIXME_xxx_create_app_user($new_master_handler);
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      `ssh -p$new_master_ssh_port $new_master_ssh_user\@$new_master_host \" $ssh_start_vip \"`;
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
}
elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
}
else {
    &usage();
    exit 1;
}
}

sub usage {
print
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
die;
}

(3) 编辑脚本send_report，修改后如下:

#!/usr/bin/perl

use strict;
use warnings FATAL => 'all';
use Mail::Sender;
use Getopt::Long;

#new_master_host and new_slave_hosts are set only when recovering master succeeded
my ( $dead_master_host, $new_master_host, $new_slave_hosts, $subject, $body );
my $smtp='smtp.163.com';
my $mail_from='xxxx';
my $mail_user='xxxxx';
my $mail_pass='xxxxx';
my $mail_to=['xxxx','xxxx'];
GetOptions(
'orig_master_host=s' => \$dead_master_host,
'new_master_host=s' => \$new_master_host,
'new_slave_hosts=s' => \$new_slave_hosts,
'subject=s'          => \$subject,
'body=s'             => \$body,
);

mailToContacts($smtp,$mail_from,$mail_user,$mail_pass,$mail_to,$subject,$body);

sub mailToContacts {
    my ( $smtp, $mail_from, $user, $passwd, $mail_to, $subject, $msg ) = @_;
    open my $DEBUG, "> /tmp/monitormail.log"
        or die "Can't open the debug      file:$!\n";
    my $sender = new Mail::Sender {
        ctype       => 'text/plain; charset=utf-8',
        encoding    => 'utf-8',
        smtp        => $smtp,
        from        => $mail_from,
        auth        => 'LOGIN',
        TLS_allowed => '0',
        authid      => $user,
        authpwd     => $passwd,
        to          => $mail_to,
        subject     => $subject,
        debug       => $DEBUG
    };

    $sender->MailMsg(
        {   msg   => $msg,
            debug => $DEBUG
        }
    ) or print $Mail::Sender::Error;
    return 1;
}

# Do whatever you want here

exit 0;

五、MHA的日常管理

1. 检查SSH配置(node5 Monitor 监控节点上操作)，如下：

# masterha_check_ssh --conf=/etc/masterha/app1.cnf

Sun May 1 22:05:12 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sun May 1 22:05:12 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Sun May 1 22:05:12 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Sun May 1 22:05:12 2016 - [info] Starting SSH connection tests..
Sun May 1 22:05:14 2016 - [debug]
Sun May 1 22:05:12 2016 - [debug] Connecting via SSH from root@192.168.1.121(192.168.1.121:22) to root@192.168.1.122(192.168.1.122:22)..
Sun May 1 22:05:13 2016 - [debug]   ok.
Sun May 1 22:05:13 2016 - [debug] Connecting via SSH from root@192.168.1.121(192.168.1.121:22) to root@192.168.1.123(192.168.1.123:22)..
Sun May 1 22:05:13 2016 - [debug]   ok.
Sun May 1 22:05:14 2016 - [debug]
Sun May 1 22:05:13 2016 - [debug] Connecting via SSH from root@192.168.1.122(192.168.1.122:22) to root@192.168.1.121(192.168.1.121:22)..
Sun May 1 22:05:13 2016 - [debug]   ok.
Sun May 1 22:05:13 2016 - [debug] Connecting via SSH from root@192.168.1.122(192.168.1.122:22) to root@192.168.1.123(192.168.1.123:22)..
Sun May 1 22:05:14 2016 - [debug]   ok.
Sun May 1 22:05:14 2016 - [debug]
Sun May 1 22:05:13 2016 - [debug] Connecting via SSH from root@192.168.1.123(192.168.1.123:22) to root@192.168.1.121(192.168.1.121:22)..
Sun May 1 22:05:14 2016 - [debug]   ok.
Sun May 1 22:05:14 2016 - [debug] Connecting via SSH from root@192.168.1.123(192.168.1.123:22) to root@192.168.1.122(192.168.1.122:22)..
Sun May 1 22:05:14 2016 - [debug]   ok.
Sun May 1 22:05:14 2016 - [info] All SSH connection tests passed successfully.

2. 检查整个复制环境状况(node5 监控节点上操作)，如下：

# masterha_check_repl --conf=/etc/masterha/app1.cnf

Sun May 1 22:46:44 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sun May 1 22:46:44 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Sun May 1 22:46:44 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Sun May 1 22:46:44 2016 - [info] MHA::MasterMonitor version 0.56.
Sun May 1 22:46:45 2016 - [info] GTID failover mode = 0
Sun May 1 22:46:45 2016 - [info] Dead Servers:
Sun May 1 22:46:45 2016 - [info] Alive Servers:
Sun May 1 22:46:45 2016 - [info]   192.168.1.121(192.168.1.121:3306)
Sun May 1 22:46:45 2016 - [info]   192.168.1.122(192.168.1.122:3306)
Sun May 1 22:46:45 2016 - [info]   192.168.1.123(192.168.1.123:3306)
Sun May 1 22:46:45 2016 - [info] Alive Slaves:
Sun May 1 22:46:45 2016 - [info]   192.168.1.122(192.168.1.122:3306) Version=5.6.29-log (oldest major version between slaves) log-bin:enabled
Sun May 1 22:46:45 2016 - [info]     Replicating from 192.168.1.121(192.168.1.121:3306)
Sun May 1 22:46:45 2016 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun May 1 22:46:45 2016 - [info]   192.168.1.123(192.168.1.123:3306) Version=5.6.29-log (oldest major version between slaves) log-bin:enabled
Sun May 1 22:46:45 2016 - [info]     Replicating from 192.168.1.121(192.168.1.121:3306)
Sun May 1 22:46:45 2016 - [info] Current Alive Master: 192.168.1.121(192.168.1.121:3306)
Sun May 1 22:46:45 2016 - [info] Checking slave configurations..
Sun May 1 22:46:45 2016 - [info] read_only=1 is not set on slave 192.168.1.122(192.168.1.122:3306).
Sun May 1 22:46:45 2016 - [warning] relay_log_purge=0 is not set on slave 192.168.1.122(192.168.1.122:3306).
Sun May 1 22:46:45 2016 - [info] read_only=1 is not set on slave 192.168.1.123(192.168.1.123:3306).
Sun May 1 22:46:45 2016 - [warning] relay_log_purge=0 is not set on slave 192.168.1.123(192.168.1.123:3306).
Sun May 1 22:46:45 2016 - [info] Checking replication filtering settings..
Sun May 1 22:46:45 2016 - [info] binlog_do_db= , binlog_ignore_db=
Sun May 1 22:46:45 2016 - [info] Replication filtering check ok.
Sun May 1 22:46:45 2016 - [info] GTID (with auto-pos) is not supported
Sun May 1 22:46:45 2016 - [info] Starting SSH connection tests..
Sun May 1 22:46:46 2016 - [info] All SSH connection tests passed successfully.
Sun May 1 22:46:46 2016 - [info] Checking MHA Node version..
Sun May 1 22:46:47 2016 - [info] Version check ok.
Sun May 1 22:46:47 2016 - [info] Checking SSH publickey authentication settings on the current master..
Sun May 1 22:46:47 2016 - [info] HealthCheck: SSH to 192.168.1.121 is reachable.
Sun May 1 22:46:47 2016 - [info] Master MHA Node version is 0.56.
Sun May 1 22:46:47 2016 - [info] Checking recovery script configurations on 192.168.1.121(192.168.1.121:3306)..
Sun May 1 22:46:47 2016 - [info]   Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/usr/local/mysql/data/ --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=master-bin.000008
Sun May 1 22:46:47 2016 - [info]   Connecting to root@192.168.1.121(192.168.1.121:22)..
Creating /tmp if not exists..    ok.
Checking output directory is accessible or not..
   ok.
Binlog found at /usr/local/mysql/data/, up to master-bin.000008
Sun May 1 22:46:48 2016 - [info] Binlog setting check done.
Sun May 1 22:46:48 2016 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Sun May 1 22:46:48 2016 - [info]   Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=192.168.1.122 --slave_ip=192.168.1.122 --slave_port=3306 --workdir=/tmp --target_version=5.6.29-log --manager_version=0.56 --relay_log_info=/usr/local/mysql/data/relay-log.info --relay_dir=/usr/local/mysql/data/ --slave_pass=xxx
Sun May 1 22:46:48 2016 - [info]   Connecting to root@192.168.1.122(192.168.1.122:22)..
Checking slave recovery environment settings..
    Opening /usr/local/mysql/data/relay-log.info ... ok.
    Relay log found at /usr/local/mysql/data, up to node2-relay-bin.000002
    Temporary relay log file is /usr/local/mysql/data/node2-relay-bin.000002
    Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure.
done.
    Testing mysqlbinlog output.. done.
    Cleaning up test file(s).. done.
Sun May 1 22:46:48 2016 - [info]   Executing command : apply_diff_relay_logs --command=test --slave_user='root' --slave_host=192.168.1.123 --slave_ip=192.168.1.123 --slave_port=3306 --workdir=/tmp --target_version=5.6.29-log --manager_version=0.56 --relay_log_info=/usr/local/mysql/data/relay-log.info --relay_dir=/usr/local/mysql/data/ --slave_pass=xxx
Sun May 1 22:46:48 2016 - [info]   Connecting to root@192.168.1.123(192.168.1.123:22)..
Checking slave recovery environment settings..
    Opening /usr/local/mysql/data/relay-log.info ... ok.
    Relay log found at /usr/local/mysql/data, up to slave-relay-bin.000012
    Temporary relay log file is /usr/local/mysql/data/slave-relay-bin.000012
    Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure.
done.
    Testing mysqlbinlog output.. done.
    Cleaning up test file(s).. done.
Sun May 1 22:46:48 2016 - [info] Slaves settings check done.
Sun May 1 22:46:48 2016 - [info]
192.168.1.121(192.168.1.121:3306) (current master)
+--192.168.1.122(192.168.1.122:3306)
+--192.168.1.123(192.168.1.123:3306)

Sun May 1 22:46:48 2016 - [info] Checking replication health on 192.168.1.122..
Sun May 1 22:46:48 2016 - [info] ok.
Sun May 1 22:46:48 2016 - [info] Checking replication health on 192.168.1.123..
Sun May 1 22:46:48 2016 - [info] ok.
Sun May 1 22:46:48 2016 - [info] Checking master_ip_failover_script status:
Sun May 1 22:46:48 2016 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.121 --orig_master_ip=192.168.1.121 --orig_master_port=3306

IN SCRIPT TEST====/etc/init.d/keepalived stop==/etc/init.d/keepalived start===

Checking the Status of the script.. OK
Sun May 1 22:46:48 2016 - [info] OK.
Sun May 1 22:46:48 2016 - [warning] shutdown_script is not defined.
Sun May 1 22:46:48 2016 - [info] Got exit code 0 (Not master dead).

MySQL Replication Health is OK.
[root@node5 masterha]#

3. 开启MHA Manager监控(node5操作)如下：

# mkdir -p /var/log/masterha/app1/
# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &

参数说明：
--remove_dead_master_conf     #该参数代表当发生主从切换后，老的主库的ip将会从配置文件中移除。
--manger_log                  #日志存放位置
--ignore_last_failover        #在缺省情况下，如果MHA检测到连续发生宕机，会生成app1.failover.complete文件，会造成MHA管理进程无法启动。

4. 查看MHA Manager监控是否正常：

# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:2480) is running(0:PING_OK), master:192.168.1.121

5. 查看启动日志(node5操作)如下：

# tail -n20 /var/log/masterha/app1/manager.log

6. 关闭MHA Manage监控：

(1) 关闭

# masterha_stop --conf=/etc/masterha/app1.cnf

(2) 启动

# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1

六、MHA Failover切换

1. 自动Failover切换

(1) 模拟master mysql关闭
(2) VIP将会切换到node2
(3) /etc/masterha/app1.cnf中将原主服务器配置文件清掉。
(4) masterha_manager监控进程会自动退出关闭，并在/var/log/masterha/app1下生成app1.failover.complete文件，manager.log会记录全过程，从服务器会自动从新的主服务器复制。
(5) 原主服务器mysqld启动的，需要清掉/var/log/masterha/app1下生成app1.failover.complete文件，添加node1配置文件到/etc/masterha/app1.cnf，通过manager.log中的记录的故障点，重新同步主服务器，成为从节点。

2. 手动Failover切换

(1) 先停MHA Manager进程。
masterha_stop --conf=/etc/masterha/app1.cnf
(2) 停掉master mysqld
(3) 手动切换，在Manager主机上操作如下：
# masterha_master_switch --master_state=dead --conf=/etc/masterha/app1.cnf --dead_master_host=192.168.1.122 --dead_master_port=3306 --new_master_host=192.168.1.121 --new_master_port=3306 --ignore_last_failover

通过观察日志可以观察切换全过程。
(4) 如上节方式恢复节点为从服务器。