无论多少个vlan,以此类推进行配置即可
R1的配置
配置单臂路由
Router>enable
Router#configure t
Router#configure terminal
Router(config)#hostname RA
RA(config)#interface fastEthernet 0/0
RA(config-if)#no ip address
RA(config-if)#no shutdown
RA(config-if)#exit
RA(config)#interface fastEthernet 0/0.1
RA(config-subif)#encapsulation dot1Q 1
RA(config-subif)#ip address 192.168.1.1 255.255.255.0
RA(config)#interface fastEthernet 0/0.2
RA(config-subif)#encapsulation dot1Q 2
RA(config-subif)#ip address 192.168.2.1 255.255.255.0
RA(config)#interface fastEthernet 0/0.3
RA(config-subif)#encapsulation dot1Q 3
RA(config-subif)#ip address 192.168.3.1 255.255.255.0
存在多个vlan时类推
SA的配置
配置TRUNK(不变)
Switch>enable
Switch#configure terminal
Switch(config)#hostname SA
SA(config)#interface range fasterthernet 0/1-3
SA(config-if-range)#switchport mode trunk
SA(config-if-range)#exit
配置VTP(不变。可以修改名字和密码)
SA(config)#vtp mode server
SA(config)#vtp domain xinbin
SA(config)#vtp password xinbin
配置VLAN (存在多个vlan时自己添加)
SA(config)#vlan 2
SA(config-vlan)#exit
SA(config)#vlan 3
SA(config-vlan)#exit
SB的配置
配置TRUNK(不变)
Switch>enable
Switch#configure terminal
Switch(config)#hostname SB
SB(config)#interface range fasterthernet 0/1
SB(config-if-range)#switchport mode trunk
配置VTP(不变,可以修改名字和密码)
SA(config)#vtp mode client
SA(config)#vtp domain xinbin
SA(config)#vtp password xinbin
配置VLAN(按情况划分)
SB(config)#interface range fasterthernet 0/8-14
SB(config-if-range)#switchport mode access
SB(config-if-range)#switchport access vlan 2
SB(config-if-range)#exit
SB(config)#interface range fasterthernet 0/15-23
SB(config-if-range)#switchport mode access
SB(config-if-range)#switchport access vlan 3
SB(config-if-range)#exit
SC的配置值
配置TRUNK(不变)
Switch>enable
Switch#configure terminal
Switch(config)#hostname SC
SC(config)#interface range fasterthernet 0/1
SC(config-if-range)#switchport mode trunk
配置VTP(不变,可以修改名字和密码)
SC(config)#vtp mode client
SC(config)#vtp domain xinbin
SC(config)#vtp password xinbin
配置VLAN(按情况划分)
SC(config)#interface range fasterthernet 0/8-14
SC(config-if-range)#switchport mode access
SC(config-if-range)#switchport access vlan 2
SC(config-if-range)#exit
SC(config)#interface range fasterthernet 0/15-23
SC(config-if-range)#switchport mode access
SC(config-if-range)#switchport access vlan 3
SC(config-if-range)#exit
Pc1的配置
Ip:192.168.1.2
子网掩码:255.255.255.0
默认网关:192.168.1.1
Pc2的配置
Ip:192.168.2.2
子网掩码:255.255.255.0
默认网关:192.168.2.1
Pc3的配置
Ip:192.168.3.2
子网掩码:255.255.255.0
默认网关:192.168.3.1
Pc4的配置
Ip:192.168.1.3
子网掩码:255.255.255.0
默认网关:192.168.1.1
Pc5的配置
Ip:192.168.2.3
子网掩码:255.255.255.0
默认网关:192.168.2.1
Pc6的配置
Ip:192.168.3.2
子网掩码:255.255.255.0
默认网关:192.168.3.1
转载于:https://blog.51cto.com/251533981/1231213