1、安装ipmi工具

# yum -y install OpenIPMI OpenIPMI-tools
# chkconfig impi on
# service ipmi start
2、修改IDRAC的网络配置
# ipmitool -I open lan set 1 ipaddr 10.128.10.123
# ipmitool -I open lan set 1 defgw ipaddr 10.128.10.1
# ipmitool -I open lan set 1 netmask 255.255.255.0
# ipmitool -I open lan set 1 access on

 

修改IPMI的snmp信息

设置 SNMP community 串

# ipmitool -I open lan set 1 snmp 新密码

设置 null 用户密码

# ipmitool -I open lan set 1 password 新密码

設定 root 密碼

# ipmitool -I open user set password 2 新密码

可以用下免的命令检查刚才设定的值是否正确:

# ipmitool -I open lan print 1

你可以把你 iDRAC 远控管理的密码放在环境变量內方便操作.(不安全)

# export IPMI_PASSWORD="kbsonlong"

在下指令的時候可以用 "-E" 选項 就可以直接不打密码就可以下指令.

# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power status
Chassis Power is on

如果你要用交互的方式输入密码就用 "-a" 的方式下指令.

# ipmitool -I lan -U root -a -H 10.128.10.123 chassis power status
Password:
Chassis Power is on

如果你想放在 script 內. 你可以使用 "-P" 的方式加上你的密码明文. 就可以下指令.

# ipmitool -I lan -U root -P "新密码" -H 10.128.10.123 chassis power status
Chassis Power is on

再來你就可以用下列指完成开关机

## 开机 – Power On
# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power on
## 強制断电关机 – Power Off
# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power off
## 通过操作系统正常关机 – Graceful Shutdown
# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power soft
## 重新热启动 – Reset System (warm boot)
# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power reset
## 冷启动 – Power Cycle System (cold boot)
# ipmitool -I lan -U root -E -H 10.128.10.123 chassis power cycle

其他信息

## 检查电流电压
# ipmitool -I lan -U root -E -H 192.168.1.101 sdr type "Current"
Current | 94h | ok | 10.1 | 2 Amps
Current | 95h | ns | 10.2 | Disabled
System Level | 98h | ok | 7.1 | 245 Watts
## 检查温度状态
# ipmitool -I lan -U root -E -H 192.168.1.101 sdr type "Temperature"
Temp | 01h | ns | 3.1 | Disabled
Temp | 02h | ns | 3.2 | Disabled
Temp | 05h | ns | 10.1 | Disabled
Ambient Temp | 07h | ns | 10.1 | Disabled
Temp | 06h | ns | 10.2 | Disabled
Ambient Temp | 08h | ns | 10.2 | Disabled
Ambient Temp | 0Eh | ok | 7.1 | 16 degrees C
Planar Temp | 0Fh | ns | 7.1 | Disabled
IOH THERMTRIP | 5Dh | ns | 7.1 | Disabled
CPU Temp Interf | 76h | ns | 7.1 | Disabled
Temp | 0Ah | ns | 8.1 | Disabled
Temp | 0Bh | ns | 8.1 | Disabled
Temp | 0Ch | ns | 8.1 | Disabled
## 列出 event logs
# ipmitool -I lan -U root -E -H 192.168.1.101 sel list
1 | 01/11/2011 | 11:40:54 | Temperature #0x0e | Upper Non-critical going high
2 | 01/01/2011 | 12:32:41 | Temperature #0x0e | Upper Critical going high

 

 

遇见问题：

# ipmitool sensor list
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No
such file or directory
Get Device ID command failed
Unable to open SDR for reading

需要添加如下：

# modprobe ipmi_watchdog
# modprobe ipmi_poweroff
# modprobe ipmi_devintf
# modprobe ipmi_si
# modprobe ipmi_msghandler