7.
使用
STP
实现负载。
实现负载分担有两种方法:
1) 使用端口优先级。
配置:
Switch_1(config-if)# interface fa0/1
Switch_1(config-if)# spanning-tree vlan 8 9 10 port-priority 10
Switch_1(config)# interface fa0/2
Switch_1(config-if)# spanning-tree vlan 3 4 5 6 port-priority 10
2) 使用路径值。例如:
Switch_1(config)# interface fa0/1
Switch_1(config-if)# spanning-tree vlan 2 3 4 cost 30
Switch_1(config)# interface fa0/2
Switch_1(config-if)# spanning-tree vlan 8 9 10 cost 30
实现负载分担有两种方法:
1) 使用端口优先级。
配置:
Switch_1(config-if)# interface fa0/1
Switch_1(config-if)# spanning-tree vlan 8 9 10 port-priority 10
Switch_1(config)# interface fa0/2
Switch_1(config-if)# spanning-tree vlan 3 4 5 6 port-priority 10
2) 使用路径值。例如:
Switch_1(config)# interface fa0/1
Switch_1(config-if)# spanning-tree vlan 2 3 4 cost 30
Switch_1(config)# interface fa0/2
Switch_1(config-if)# spanning-tree vlan 8 9 10 cost 30
转载于:https://blog.51cto.com/xxgbblog/48429