编译操作参考版,没有每一步详细操作,慎入
关闭selinux和防火墙 service iptables stop chkconfig iptables off vi /etc/selinux/config 把SELINUX=enforcing 修改为disabled yum -y groupinstall "Development Tools" "Server Platform Development" yum install -y gcc gcc-c++ make cmake automake autoconf gd file bison patch mlocate flex \ diffutils zlib zlib-devel pcre pcre-devel \ libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel \ glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel \ ncurses ncurses-devel curl curl-devel libcurl libcurl-devel e2fsprogs e2fsprogs-devel \ krb5 krb5-devel openssl openssl-devel \ openldap openldap-devel nss_ldap openldap-clients openldap-servers \ openldap-devellibxslt-devel kernel-devel libtool-libs \ readline-devel gettext-devel libcap-devel php-mcrypt libmcrypt libmcrypt-devel recode-devel yum install -y libxml2 libxml2* openssl-dev libcurl3-openssl-dev openssl-devel.i686 \ openssl-perl.i686 libcurl-devel.i686 libjpeg-turbo-devel.i686 libpng.i686 libpng-devel.i686l freetype-devel php-gd yum -y install cmake ncurses ncurses-devel bison bison-devel boost boost-devel yum -y install libicu-devel 查看系统版本 cat /etc/redhat-release 主要目录 /data/lanmp/soft /data/www 安装mysql groupadd mysql useradd -s /sbin/nologin -g mysql -M mysql groupadd www useradd -s /sbin/nologin -g www -M www chown -R mysql:mysql /data/mysql chown -R mysql:mysql /usr/local/mysql chown -R www:www /usr/local/nginx chown -R www:www /usr/local/php chown -R www:www /data/wwwroot/ wget https://ftp.pcre.org/pub/pcre/pcre-8.42.tar.gz wget http://www.zlib.net/zlib-1.2.11.tar.gz ./configure \ --user=www \ --group=www \ --prefix=/usr/local/nginx nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx modules path: "/usr/local/nginx/modules" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" vi /etc/init.d/nginx 加执行权限 chmod +x /etc/init.d/nginx 开机启动 chkconfig nginx on include vhosts/*.conf; mysql tar -xvzf boost_1_59_0.tar.gz -C /usr/local/boost cmake \ -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \ -DMYSQL_DATADIR=/data/mysql/ \ -DSYSCONFDIR=/etc \ -DWITH_MYISAM_STORAGE_ENGINE=1 \ -DWITH_INNOBASE_STORAGE_ENGINE=1 \ -DWITH_MEMORY_STORAGE_ENGINE=1 \ -DWITH_READLINE=1 \ -DMYSQL_UNIX_ADDR=/tmp/mysql.sock \ -DMYSQL_TCP_PORT=3306 \ -DENABLED_LOCAL_INFILE=1 \ -DWITH_PARTITION_STORAGE_ENGINE=1 \ -DEXTRA_CHARSETS=all \ -DDEFAULT_CHARSET=utf8 \ -DDEFAULT_COLLATION=utf8_general_ci \ -DMYSQL_USER=mysql \ -DWITH_DEBUG=0 \ -DWITH_SSL=system \ -DWITH_BOOST=/usr/local/boost make && make install #拷贝mysql安装目录下support-files服务脚本到init.d目录 cp support-files/mysql.server /etc/rc.d/init.d/mysqld #赋予权限 chmod +x /etc/rc.d/init.d/mysqld cd /usr/local/mysql ./bin/mysqld --initialize --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql mysql 密码 =jjhrEadh6dR echo "PATH=$PATH:/usr/local/mysql/bin" > /etc/profile.d/mysql.sh source /etc/profile 重置密码 set password = '123456'; 新加远程访问用户,测试 GRANT ALL PRIVILEGES ON *.* TO 'zx'@'%'IDENTIFIED BY 'qyy@2018' WITH GRANT OPTION; flush privileges; php安装 yum remove libevent libevent-devel yum install libevent2-devel libevent2 yum -y install openldap yum -y install openldap-devel cp -frp /usr/lib64/libldap* /usr/lib/ yum install -y epel-release yum install -y libmcrypt-devel export LD_LIBRARY_PATH=/usr/local/lib: LD_LIBRARY_PATH ./configure --prefix=/usr/local/php \ --with-config-file-path=/usr/local/php/etc \ --with-mysql-sock=/tmp/mysql.sock \ --enable-fpm \ --with-fpm-user=www \ --with-fpm-group=www \ --enable-mysqlnd \ --with-mysqli=mysqlnd \ --with-pdo-mysql=mysqlnd \ --enable-mysqlnd-compression-support \ --with-iconv-dir \ --with-freetype-dir \ --with-jpeg-dir \ --with-png-dir \ --with-zlib \ --with-libxml-dir \ --enable-xml \ --disable-rpath \ --enable-bcmath \ --enable-shmop \ --enable-sysvsem \ --enable-inline-optimization \ --with-curl \ --enable-mbregex \ --enable-mbstring \ --enable-intl \ --with-mcrypt \ --with-libmbfl \ --enable-ftp \ --with-gd \ --enable-gd-jis-conv \ --enable-gd-native-ttf \ --with-openssl \ --with-mhash \ --enable-pcntl \ --enable-sockets \ --with-xmlrpc \ --enable-zip \ --enable-soap \ --with-gettext \ --enable-fileinfo \ --enable-opcache \ --with-pear \ --enable-maintainer-zts \ --with-ldap=shared \ --without-gdbm mv /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf #注意:发现启动时错误,配置文件无法找到,需要mv /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/default.conf #复制php.ini配置文件 cp php.ini-production /usr/local/php/etc/php.ini #复制php-fpm启动脚本到init.d cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm #赋予执行权限 chmod +x /etc/init.d/php-fpm #添加为启动项 #chkconfig --add php-fpm #设置开机启动 chkconfig php-fpm on service php-fpm start vi /etc/profile export PATH=$PATH:'/usr/local/php/bin/' source /etc/profile cp /usr/local/src/php-7.2.9/php.ini-production /usr/local/php/etc/php.ini cd /usr/local/php/etc/php-fpm.d cp www.conf.default www.conf cd /usr/local/php/etc/ mv php-fpm.conf.default php-fpm.conf /etc/hosts nodejs curl --silent --location https://rpm.nodesource.com/setup_8.x | bash - 8是版本系列 yum install -y nodejs npm install -g cnpm --registry=https://registry.npm.taobao.org curl -sS https://getcomposer.org/installer | php mv composer.phar /usr/local/bin/composer redis yum -y install tcl wget http://download.redis.io/releases/redis-4.0.11.tar.gz wget http://pecl.php.net/get/redis-4.1.1.tgz 扩展 /usr/local/php/bin/phpize ./configure --with-php-config=/usr/local/php/bin/php-config make && make install /usr/local/php/lib/php/extensions/no-debug-zts-20170718/ /usr/local/php/lib/php/extensions/no-debug-zts-20170718/ mv ./redis-4.0.11 /usr/local/redis/ make && make install mkdir /etc/redis mv /usr/local/redis/redis.conf /etc/redis/redis.conf cp /usr/local/redis/utils/redis_init_script /etc/rc.d/init.d/redis chkconfig --add redis chkconfig redis on 加入服 务失败 vi /etc/rc.d/init.d/redis ftp yum -y install vsftpd www用户 密码qyy@2018 chkconfig vsftpd on vi /etc/vsftpd/vsftpd.conf vi /etc/passwd listen_port=2111 pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES local_root=/data/wwwroot pasv_enable=YES pasv_min_port=10020 pasv_max_port=10040 cd /usr/local/php/bin/ wget http://pear.php.net/go-pear.phar -O go-pear.php php go-pear.php 默认操作按 enter ln -s /usr/local/php/bin/pecl /usr/bin/pecl pecl install event pecl install swoole 全部按找[yes]里面的默认推荐即可 extension=event.so extension=swoole.so
datetime 默认问题
sql-mode=ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION