nagios监控服务器搭建

最新推荐文章于 2024-08-24 15:46:50 发布

weixin_34278190

最新推荐文章于 2024-08-24 15:46:50 发布

阅读量92

点赞数

文章标签：操作系统 php 运维

原文链接：http://blog.51cto.com/sx521/810119

版权

原文链接：http://bbs.linuxtone.org/thread-2201-1-1.html IT运维专家网--"自由平等，互助分享！"

此贴是我使用Nagios 及其插件的总结，以后我会将最新的学习的成果，陆续加入该贴，希望这个帖子能够为大家学习nagios挫折少一些！
以下帖子，是我将老曹的三篇nagios的帖子，做了修改和修正，有什么冒犯之处，还请老曹和网友，多多海涵！哈哈！
一、安装Nagios及其插件
1.Nagios 需要的环境
LAMP 或者LEMP 这里不作论述，请在本站查找。
特别注意:yum安装必备的编译组件、库及依赖软件，必须安装GD GD-DEVEL
到Nagios官方下载下列软件包
下载 nagios-3.0.6.tar.gz -----------------------主程序
nagios-plugins-1.4.13.tar.gz------------------插件
nrpe_2.12.tar.gz --------------------------监控Linux需要
nsclient++0.3.5 ---------------------------监控 windows需要

2。安装nagios-3.0.6.tar.gz
=======================
/usr/sbin/useradd nagios
passwd nagios 输入密码
/usr/sbin/groupadd nagcmd
/usr/sbin/usermod -g nagcmd nagios
/usr/sbin/usermod -g nagcmd apache
=====================
tar xzf nagios-3.0.6.tar.gz
=======================
cd nagios-3.0.6
=======================
./configure --with-group=nagios --with-user=nagios --with-command-group=nagcmd --with-gd-lib=/usr/lib --with-gd-inc=/usr/include
================
make all
==================
make install
================
make install-init
=======================
make install-config
=====================
make install-commandmode
===============================
vi /usr/local/nagios/etc/objects/contacts.cfg
更改email地址nagiosadmin的联系人定义信息中的EMail信息为你的EMail信息以接收报警内容。
=================================
make install- webconf
=====================
/usr/local/apache/bin/htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin
输入密码（这一步很重要）
========================================================
3。译并安装Nagios插件
nagios-plugins-1.4.13.tar.gz
tar xzf nagios-plugins-1.4.13.tar.gz
cd nagios-plugins-1.4.13
============================
./configure --with-nagios-user=nagios --with-nagios-group=nagios
make
make install
============================
chkconfig --add nagios
chkconfig nagios on
=====================
验证Nagios的样例配置文件
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
================================
如果没有报错，可以启动Nagios 服务
service nagios start
=========================================
4。编辑apache 的httpd.conf
最后面添加：
ScriptAlias /nagios/cgi-bin "/usr/local/nagios/sbin"
<Directory "/usr/local/nagios/sbin">
#  SSLRequireSSL
Options ExecCGI
AllowOverride None
Order allow,deny
Allow from all
#  Order deny,allow
#  Deny from all
#  Allow from 127.0.0.1
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /usr/local/nagios/etc/htpasswd.users
Require valid-user
</Directory>
Alias /nagios "/usr/local/nagios/share"
<Directory "/usr/local/nagios/share">
#  SSLRequireSSL
Options None
AllowOverride None
Order allow,deny
Allow from all
#  Order deny,allow
#  Deny from all
#  Allow from 127.0.0.1
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /usr/local/nagios/etc/htpasswd.users
Require valid-user
</Directory>
=========================================
5。在验证下
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg

没有出错的话！重新启动nagios和apache

========================
6。关于se linux，如果selinux是关闭状态，可以忽略这部！
如果selinux开启！那么
如果是SELinux处于强制安全模式时需要做
getenforce
令SELinux处于容许模式
setenforce 0
如果要永久性更变它，需要更改/etc/selinux/config里的设置并重启系统。
不关闭SELinux或是永久性变更它的方法是让CGI 模块在SELinux下指定强制目标模式：
chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/ chcon -R -t httpd_sys_content_t /usr/local/nagios/share/

7.登陆web接口！
http://localhost/nagios
输入你刚才设置的用户名密码！ok了！看到界面了吧
ps：如果遇到问题！！！！
如果遇到关于cgi什么权限问题！察看下/usr/local/nagios的属主组权限，
包括里面的内容，
尤其是/usr/local/nagios/etc/htpasswd.users这个文件的权限！都应该是nagios:nagios
另外尝试编辑
vi /usr/local/nagios/etc/cgi.cfg
把
use_authentication=1
修改为
use_authentication=0
如果出现页面无法显示之类的，去访问bbs.itnms.net里面的 http://www.itnms.net/discuz/forumdisplay.php?fid=10&pageD4
有关于基本的错误的解决方法！
=========================================================

二、监控windows 系统
添加第一台windows2003设备来进行检测

接下来我们开始监控第一台windows设备！
windows服务器上要安装nsclient++0.3.5.zip
解压后，copy到c盘根目录
1。在nagios服务器上
vi /usr/local/nagios/etc/nagios.cfg
#cfg_file=/usr/local/nagios/etc/objects/windows.cfg 去掉这句话的注释
保存退出！
2。到win服务器上，打开命令窗口，cd到刚才解压的目录
在命令行界面执行 nsclient++ /install
然后 nsclient++ SysTray 如果出错不用管！
此时在“服务”里面已经有了nsclient的服务
3。编辑NES.ini
在 [modules] 选项里
去掉所有的注释符号；除了
CheckWMI.dll和RemoteConfiguration.dll
4。the [Settings] 选项里
修改allowd_host=61.x.x.x(nagios服务器的ip)
如果这一步要修改passwd，那么nagios服务器里面commands.cfg也要修改！
步骤: 在commands.cfg 找到check_nt 定义命令中的 Command_line 在其中添加-s 你的密码

5。[NSClient] 里面，去掉port=12489的注释！
他靠端口12489侦听，所以防火墙要打开这个端口！
然后启动nsclient
nsclient++ /start
========================================
接下来我们开始配置nagios服务器里面的内容
vi /usr/local/nagios/etc/objects/windows.cfg
=================================
define host{
use windows-server
host_name winserver alias
My Windows Server
address 192.168.1.2
}
修改hostname和address，很重要！！
然后下面的很多定义，都可以不用改，想知道每个定义的意思，去看看官方的文档！！
下面的定义全部修改hostname 都改为自己的！一定要一样！
接下来保存！退出！！
======================
然后重新启动nagios
看看你的web图形是不是变化了！它会自动连接！
如果这个时候出错！尝试去telnet win服务器的ip 12489端口！！
自己排除原因！！

三、监控Linux服务器
添加除了本机外第一台linux服务器

刚才我们配置完了之后，可以监控本机，也可以监控第一台win服务器（里面自带的windows.cfg），现在我们监控第一台linux服务器！至于为什么要用nrpe,请参考官方文档，这里我就不多说了！
1。被监控端（被监控的服务器）安装nagios-nrpe_2.12.tar.gz和插件nagios-plugins-1.4.13.tar.gz
安装过程
====================
useradd nagios
passwd nagios
tar -zxvf nagios-plugins-1.4.13.tar.gz
cd nagios-plugins-1.4.13
./configure
make
make install
=======================
这一步完成后会在/usr/local/nagios/下生成两个目录libexec和share
======================================
chown nagios.nagios /usr/local/nagios
然后
tar -zxvf nagios-nrpe_2.12.tar.gz
cd nagios-nrpe_2.12
./configure
make all
make install-plugin
make install-daemon
make install-daemon-config
========================================================

vi /usr/local/nagios/etc/nrpe.cfg
将allowed_hosts=127.0.0.1
修改成你的nagios服务器的ip
=======================================
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
启动nrpe
================================================
netstat -an|grep 5666
察看是否在5666端口上监听
注意：防火墙释放端口5666，很重要
===================================
/usr/local/nagios/libexec/check_nrpe -H localhost
察看是否能返回nrpv版本号，返回则正常！
=============================================
vi /usr/local/nagios/etc/nrpe.cfg
可以看到里面监控对象
# The following examples use hardcoded command arguments...
command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
command[check_hda1]=/usr/local/nagios/libexec/check_disk -w 20 -c 10 -p /dev/hda1
command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200

===================================================
然后再启动nrpe
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg –d
这样子，在监控端算是设置完了！！！

2。我们来设置nagios服务器端的设置！
安装nagios-nrpe_2.12.tar.gz
这里安装过程比上面再被监控服务安装少两部
=========================================
tar -zxvf nagios-nrpe_2.12.tar.gz
cd nagios-nrpe_2.12
./configure
make all
make install-plugin
================================
然后我们测试下连通性
/usr/local/nagios/libexec/check_nrpe -H 被监控端ip
如果返回nrpe版本号，那么正常！
如果返回拒绝连接！那么telnet ip 5666看是否正常
======================================================

配置：
=================================
由于nrpe外构组件，所以必须在commands.cfg中定义（我这里的nagios版本是3.0.3和2。x的版本有些不一样）
[root@localhost etc]# vi /usr/local/nagios/etc/objects/commands.cfg
最下面添加
#check nrpe
define command{
      command_name check_nrpe
      command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
      }
========================================================
[root@localhost etc]# vi /usr/local/nagios/etc/nagios.cfg
中间添加
cfg_file=/usr/local/nagios/etc/objects/aiyo-mailserver.cfg
最后面的 aiyo-mailserver.cfg你们可以自己改，或者Linux1.cfg也可以！
=================================================
新建aiyo-mailserver.cfg
[root@localhost etc]# vi /usr/local/nagios/etc/objects/aiyo-mailserver.cfg
添加
define host{
         use       linux-server
      host_name    aiyo-mailserver
      alias       aiyo-mailserver
      address             210.51.47.213
      }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    HTTP
      check_command    check_http
   }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    FTP
      check_command check_ftp
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    SSH
      check_command check_ssh
   }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    SMTP
      check_command check_smtp
   }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    POP3
      check_command check_pop
   }

define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    check-swap
      check_command          check_nrpe!check_swap
            }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    check-load
      check_command          check_nrpe!check_load
            }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    check-disk
      check_command          check_nrpe!check_had1

define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    zombie_procs
      check_command          check_nrpe!check_zombie_procs
            }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    check-users
      check_command          check_nrpe!check_users
            }
define service{
      use          generic-service
      host_name    aiyo-mailserver
      service_description    total_procs
      check_command          check_nrpe!check_total_procs
               }
保存，退出！
这个里面定义了对象和服务！
注意：
define host{
         use       linux-server
这个你要能在commands.cfg找到！如果是3.0.x版本，应该就对的
！如果是2。x版本，不一样定了！
=====================================================
我们来运行
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
检测下是不是都正确！
================================================
正确的话，那么我们重新启动nagios
那么在web页面里面就会出现！！
=====================================

三、飞信报警
飞信机器人网站 http://www.it-adv.net/
新版fetion命令是交互式的，需要登录后才能以sms命令发送短信，不方便nagios调用宏变量，所以使用旧版sms命令行
下载并安装Fetionrobot所需要的库文件
#wget http://down.freebsdsystem.org/libs/fetion/libraryrh5x32.tar.gz
#wget http://down.freebsdsystem.org/monitor/fetion_linux_20080402.tar.gz
#tar xvfz fetion_linux_20080402.tar.gz
#cd fetion_linux_20080402
#cp sms /usr/local/nagios/libexec/
#tar zvxf libraryrh5x32.tar.gz
#cp lib* /usr/lib
#sms -h
sms -f mobile -p pwd -t mobile1,.. -m message -a message -d
sms -f mobile -p pwd -t mobile1,.. -i file_name[utf8] -a invite_message -d 1
-f:Fetion mobile account(only supports mobile phone No.)
-p:Account password
-t

estination mobile list
-m:Message
-i:File name(only supports utf8)
-a:Auto send invite using invite_message.
-d

ebug on.
nagios配置
# vi /usr/local/nagios/etc/objects/commands.cfg
# ’sms send’command definiton
define command{
      command_name notify-service-by-sms
      command_line /usr/local/nagios/libexec/sms -f 139xxxxxxxx -p xxxxxx -t $CONTACTPAGER$ -m "$HOSTNAME$ $SERVICEDESC$ is $SERVICESTATE$ on $TIME$ result is $SERVICEOUTPUT$" $CONTACTPAGER$
}
define command{
      command_name notify-host-by-sms
      command_line /usr/local/nagios/libexec/sms -f 139xxxxxxxx -p xxxxxx -t $CONTACTPAGER$ -m "$HOSTNAME$ $SERVICEDESC$ is $SERVICESTATE$ on $TIME$ result is $SERVICEOUTPUT$" $CONTACTPAGER$
}
# vi /usr/local/nagios/etc/objects/contacts.cfg
define contact{
      contact_name nagios_sms
      alias nagios_sms
      host_notifications_enabled 1
      service_notifications_enabled 1
      service_notification_period 24×7
      host_notification_period 24×7
      service_notification_options u,c # UNKNOWN and CRITICAL
      host_notification_options d,u    # DOWN and UNREACHABLE
      service_notification_commands notify-service-by-sms
      host_notification_commands notify-host-by-sms
      pager 138xxxxxxxx                # 服务器管理员手机号码
      can_submit_commands 1
}

附上:解决3D Status Map查看问题
http://nagios.org/faqs/viewfaq.php?faq_id=51
Title:Where can I find a VRML client for my web browser so I can view the
3-D status map? FAQ ID:F0051 Submitted By:Ethan Galstad  Last
Updated:10/28/2004
Description:
In order to view the output from the 3-D statusmap CGI (statuswrl.cgi),
you need a
VRML
client/plugin
for your web browser.

Solution:
There are several freely available VRML web browser plugins available.
Which one you choose to install will depend on your operating system, web
browser, and your own likes/dislikes. I've provided links to some of the more
popular VRML clients below:
Cortona
   (Parallel Graphics) Cosmo Player (Computer Associates and
   NIST)
FreeWRL

OpenVRML

自：http://www.mail-archive.com/nagi ... e.net/msg05033.html
3-D Status map solution:
========================
For the 3-D Status Map option, you'll have to have the appropriate plugin
installed...  If you do have a VRML
viewer installed, then there's something
wrong on the webserver side of things, and it's not set up correctly to be
serving the .cgi as an actual CGI file.
To determine if you have the correct plugin, try this page:
http://cic.nist.gov/vrml/vbdetect.html
That will check to see if you have a VRML viewer, and it has a few
recommendations for a viewer as well.
(For a Windows machine, I would
recommend Cortona, only because I've used it before without a problem).
友情提示：在下列网址http://www.cortona3d.com/install/iexplore.php 为IE安装一个插件，就可以看3D监控图了

转载于:https://blog.51cto.com/sx521/810119

weixin_34278190

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
nagios监控服务器搭建

原文链接：http://bbs.linuxtone.org/thread-2201-1-1.html IT运维专家网--"自由平等，互助分享！" 此贴是我使用Nagios 及其插件的总结，以后我会将最新的学习的成果，陆续加入该贴，希望这个帖子能够为大家学习nagios挫折少一些！以下帖子，是我将老曹的三篇nagios的帖子，做了修改和修正，有什么冒犯之...
复制链接

扫一扫