在本文中,我们主要介绍重复字段的内容,自我感觉有个不错的建议和大家分享下
查询及删除重复记载的SQL语句
1、查找表中多余的重复记载,重复记载是根据单个字段(peopleId)来判断
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
2、删除表中多余的重复记载,重复记载是根据单个字段(peopleId)来判断,只留有rowid最小的记载
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
注:rowid为
自带不必该.....
3、查找表中多余的重复记载(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记载(多个字段),只留有rowid最小的记载
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记载(多个字段),不包括rowid最小的记载
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
(二)
比方说在A表中存在一个字段“name”,而且不同记载之间的“name”值有可能会雷同,
现在就是需要查询出在该表中的各记载之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也雷同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
(三)
方法一
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
整个世界,因为有了阳光,城市有了生机;细小心灵,因为有了阳光,内心有了舒畅。明媚的金黄色,树丛间小影成像在叶片上泛有的点点破碎似的金灿,海面上直射反映留有的随波浪层层翻滚的碎片,为这大自然创造了美景,惹人醉的温馨之感,浓浓暖意中夹杂着的明朗与柔情,让雨过天晴后久违阳光的心灵重新得到了滋润!
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
"重复记载"有两个意义上的重复记载,一是完全重复的记载,也即全部字段均重复的记载,二是部分关键字段重复的记载,比如Name字段重复,而其他字段不一定重复或都重复可以疏忽。
1、对于第一种重复,比拟容易解决,应用
select distinct * from tableName
就能够得到无重复记载的结果集。 如果该表需要删除重复的记载(重复记载保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周发生的,增加独一索引列便可解决。
2、这类重复问题平日要求保留重复记载中的第一条记载,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段独一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,现实写时可以写在select子句中省去此列)
(四)
查询重复
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1)
=======================================
1。用rowid方法
据据Oracle带的rowid属性,进行判断,是否存在重复,语句如下:
查数据:
select * from table1 a where rowid !=(select max(rowid)
from table1 b where a.name1=b.name1 and a.name2=b.name2......)
删数据:
delete from table1 a where rowid !=(select max(rowid)
from table1 b where a.name1=b.name1 and a.name2=b.name2......)
2.group by方法
查数据:
select count(num), max(name) from student --列出重复的记载数,并列出他的name属性
group by num
having count(num) >1 --按num分组后找出表中num列重复,即出现次数大于一次
删数据:
delete from student
group by num
having count(num) >1
这样的话就把全部重复的都删除了。
3.用distinct方法 -对于小的表比拟有效
create table table_new as select distinct * from table1 minux
truncate table table1;
insert into table1 select * from table_new;
文章结束给大家分享下程序员的一些笑话语录: 手机终究会变成PC,所以ip会比wm更加畅销,但是有一天手机强大到一定程度了就会发现只有wm的支持才能完美享受。就好比树和草,草长得再高也是草,时间到了条件成熟了树就会窜天高了。www.ishuo.cn