原文链接 https://erlang.mk/guide/building.html
Chapter 6. Building
Erlang.mk can do a lot of things, but it is, first and foremost, a build tool. In this chapter we will cover the basics of building a project with Erlang.mk.
Erlang.mk可以做很多事,但它首先是一个构建工具。在本章,我们将介绍使用Erlang.mk构建项目的基础知识。
For most of this chapter, we will assume that you are using a project generated by Erlang.mk .
在本章的大部分内容中,我们假设你正在使用一个Erlang.mk生成的项目。
6.1. How to build
6.1. 如何构建
To build a project, all you have to do is type make
:
你只需要输入make命令就能构建由Erlang.mk生成的项目:
$ make
It will work regardless of your project: OTP applications, library applications, NIFs, port drivers or even releases. Erlang.mk also automatically downloads and compiles the dependencies for your project.
无论你的项目是以下哪只:OTP应用,库应用,NIFs,端口驱动程序甚至版本,make命令都能正常工作。Erlang.mk也会自动下载和编译项目的依赖关系。
All this is possible thanks to a combination of configuration and conventions. Most of the conventions come from Erlang/OTP itself so any seasoned Erlang developers should feel right at home.
所有这些都可以归功于配置与约定的组合。大多数约定来自于Erlang/OTP,所以经验丰富的Erlang开发人员都会非常熟悉。
6.2. What to build
6.2. 要构建什么
Erlang.mk gives you control over three steps of the build process, allowing you to do a partial build if needed.
Erlang.mk让你可以控制构建过程中的三个步骤,也允许你在需要的时候执行部分构建。
A build has three phases: first any dependency is fetched and built, then the project itself is built and finally a release may be generated when applicable. A release is only generated for projects specifically configured to do so.
Erlang.mk的构建有三个阶段:首先,获取并构建项目所需的所有依赖关系;然后,构建项目本身;最后,在适用的情况下生成一个版本,只有专门配置的项目才会生成版本。
Erlang.mk handles those three phases automatically when you type make
. But sometimes you just want to repeat one or two of them.
当你在项目顶层目录下输入 make 命令时,Erlang.mk会自动处理这三个阶段。但是有时你只希望重复其中的一两个。
The commands detailed in this section are most useful after you have a successful build as they allow you to quickly redo a step instead of going through everything. This is especially useful for large projects or projects that end up generating releases.
本节详细介绍的命令在成功构建之后非常有用,因为它们允许你快速重做其中某一步,而不是遍历执行所有步骤。这对于大型项目或最终生成发行版的项目非常有用。
6.2.1. Application
6.2.1. 应用
You can build your application and dependencies without generating a release by running the following command:
你可以通过运行以下命令来生成应用程序和依赖型,而不生成版本。
$ make app
To build your application without touching dependencies at all, you can use the SKIP_DEPS
variable:
要构建你的应用程序而不涉及它的依赖项,你可以使用 SKIP_DEPS 变量。
$ make app SKIP_DEPS=1
This command is very useful if you have a lot of dependencies and develop on a machine with slow file access, like the Raspberry Pi and many other embedded devices.
如果你的项目有很多依赖关系,并且在一个文件访问缓慢的机器上开发,比如Raspberry Pi或者许多其他嵌入式设备,这条命令将非常有用。
Note that this command may fail if a required dependency is missing.
请注意,如果缺少所需的依赖关系,这条命令可能会失败。
6.2.2. Dependencies
6.2.2. 依赖
You can build all dependencies, and nothing else, by running the following command:
通过以下命令,你可以仅构建依赖项:
$ make deps
This will fetch and compile all dependencies and their dependencies, recursively.
这将递归的获取和编译所有依赖关系,以及依赖关系的依赖关系。
Packages and dependencies are covered in the next chapter.
下一章讲包和依赖。
6.2.3. Release
6.2.3. 版本
It is not possible to build the release without at least building the application itself, unless of course if there’s no application to begin with.
构建版本必须先构建应用程序本身,除非项目不是应用程序。
To generate the release, make
will generally suffice with a normal Erlang.mk. A separate target is however available, and will take care of building the release, after building the application and all dependencies:
为了生成发行版,
$ make rel
Consult the Releases chapter for more information about what releases are and how they are generated.
请参阅发行版章节以获取有关发行版机器生成方式的更多信息。
6.3. Application resource file
When building your application, Erlang.mk will generate the application resource file. This file is mandatory for all Erlang applications and is found in ebin/$(PROJECT).app.
PROJECT
is a variable defined in your Makefile and taken from the name of the directory when Erlang.mk bootstraps your project.
Erlang.mk can build the ebin/$(PROJECT).app in two different ways: from the configuration found in the Makefile, or from the src/$(PROJECT).app.src file.
6.3.1. Application configuration
Erlang.mk automatically fills the PROJECT
variable when bootstrapping a new project, but everything else is up to you. None of the values are required to build your project, although it is recommended to fill everything relevant to your situation.
PROJECT
The name of the OTP application or library.
PROJECT_DESCRIPTION
Short description of the project.
PROJECT_VERSION
Current version of the project.
PROJECT_MOD
The application callback module.
PROJECT_REGISTERED
List of the names of all registered processes.
PROJECT_ENV
Configuration parameters used by the application.
PROJECT_APP_EXTRA_KEYS
Other keys you want to add to the application .app
file. The variable content is written as-is to the .app
file, so be sure to format valid Erlang terms. For example: PROJECT_APP_EXTRA_KEYS = {maxT, 10000}, {start_phases, [...]}
.
LOCAL_DEPS
List of Erlang/OTP applications this project depends on, excluding erts
, kernel
and stdlib
, or list of dependencies local to this repository (in APPS_DIR
).
DEPS
List of applications this project depends on that need to be fetched by Erlang.mk.
There’s no need for quotes or anything. The relevant part of the Cowboy Makefile follows, if you need an example:
PROJECT = cowboy PROJECT_DESCRIPTION = Small, fast, modular HTTP server. PROJECT_VERSION = 2.0.0-pre.2 PROJECT_REGISTERED = cowboy_clock LOCAL_DEPS = crypto DEPS = cowlib ranch
Any space before and after the value is dropped.
Dependencies are covered in details in the next chapter.
6.3.2. Legacy method
The src/$(PROJECT).app.src file is a legacy method of building Erlang applications. It was introduced by the original rebar
build tool, of which Erlang.mk owes a great deal as it is its main inspiration.
The .app.src file serves as a template to generate the .app file. Erlang.mk will take it, fill in the modules
value dynamically, and save the result in ebin/$(PROJECT).app.
When using this method, Erlang.mk cannot fill the applications
key from dependencies automatically, which means you need to add them to Erlang.mk and to the .app.src at the same time, duplicating the work.
If you really can’t live without the legacy method, for one reason or another, worry not; Erlang.mk will support it. And if you need to create a new project that uses this method, you just have to say so when bootstrapping:
$ make -f erlang.mk bootstrap-lib LEGACY=1
6.4. Automatic application resource file values
When building the application resource file, Erlang.mk may automatically add an id
key with information about the Git commit (if using Git), or an empty string otherwise. It will only do this under specific conditions:
- The application was built as a dependency of another, or
- The legacy method was used, and the .app.src file contained
{id, "git"}
This value is most useful when you need to help your users, as it allows you to know which version they run exactly by asking them to look in the file, or by running a simple command on their production server:
1> application:get_all_key(cowboy). {ok,[{description,"Small, fast, modular HTTP server."}, {id,"2.0.0-pre.2-25-g0ffde50-dirty"},
6.5. File formats
Erlang.mk supports a variety of different source file formats. The following formats are supported natively:
Extension | Location | Description | Output |
---|---|---|---|
.erl | src/ | Erlang source | ebin/*.beam |
.core | src/ | Core Erlang source | ebin/*.beam |
.xrl | src/ | Leex source | src/*.erl |
.yrl | src/ | Yecc source | src/*.erl |
.asn1 | asn1/ | ASN.1 files | include/.hrl include/.asn1db src/*.erl |
.mib | mibs/ | SNMP MIB files | include/.hrl priv/mibs/.bin |
Files are always searched recursively.
The build is ordered, so that files that generate Erlang source files are run before, and the resulting Erlang source files are then built normally.
In addition, Erlang.mk keeps track of header files (.hrl
) as described at the end of this chapter. It can also compile C code, as described in the NIFs and port drivers chapter.
Erlang.mk also comes with plugins for the following formats:
Extension | Location | Description | Output |
---|---|---|---|
.dtl | templates/ | Django templates | ebin/*.beam |
.proto | src/ | Protocol buffers | ebin/*.beam |
6.6. Compilation options
Erlang.mk provides a few variables that you can use to customize the build process and the resulting files.
6.6.1. ERLC_OPTS
ERLC_OPTS
can be used to pass some options to erlc
, the Erlang compiler. Erlang.mk does not restrict any option. Please refer to the erlc Manual for the full list.
By default, Erlang.mk will set the following options:
ERLC_OPTS = -Werror +debug_info +warn_export_vars +warn_shadow_vars +warn_obsolete_guard
In other words: warnings as errors, debug info (recommended) and enable warnings for exported variables, shadow variables and obsolete guard functions.
You can redefine this variable in your Makefile to change it completely, either before or after including Erlang.mk:
ERLC_OPTS = +debug_info
You can also filter out some options from the defaults Erlang.mk sets, by defining ERLC_OPTS after including Erlang.mk using the :=
operator.
include erlang.mk ERLC_OPTS := $(filter-out -Werror,$(ERLC_OPTS))
6.6.2. ERLC_ASN1_OPTS
ERLC_ASN1_OPTS
can be used to pass compiler options when compiling ASN.1 files. Please refer to the asn1ct manual for the full list.
By default, Erlang.mk will leave this empty.
You can redefine this variable in your Makefile. Please see the ERLC_OPTS
section for instructions.
6.6.3. ERLC_EXCLUDE
ERLC_EXCLUDE
can be used to exclude some modules from the compilation. It’s there for handling special cases, you should not normally need it.
To exclude a module, simply list it in the variable, either before or after including Erlang.mk:
ERLC_EXCLUDE = cowboy_http2
6.7. Cold and hot builds
The first time you run make
, Erlang.mk will build everything.
The second time you run make
, and all subsequent times, Erlang.mk will only rebuild what changed. Erlang.mk has been optimized for this use case, as it is the most common during development.
Erlang.mk figures out what changed by using the dependency tracking feature of Make. Make automatically rebuilds a target if one of its dependency has changed (for example if a header file has changed, all the source files that include it will be rebuilt), and Erlang.mk leverages this feature to cut down on rebuild times.
Note that this applies only to building; some other features of Erlang.mk will run every time they are called regardless of files changed.
6.8. Dependency tracking
Note
This section is about the dependency tracking between files inside your project, not application dependencies.
Erlang.mk keeps track of the dependencies between the different files in your project. This information is kept in the $(PROJECT).d file in your directory. It is generated if missing, and will be generated again after every file change, by default.
Dependency tracking is what allows Erlang.mk to know when to rebuild Erlang files when header files, behaviors or parse transforms have changed. Erlang.mk also automatically keeps track of which files should be compiled first, for example when you have behaviors used by other modules in your project.
If your project is stable, you may want to disable generating the dependency tracking file every time you compile. You can do this by adding the following line to your Makefile:
NO_MAKEDEP ?= 1
As you can see, the snippet above uses ?=
instead of a simple equal sign. This is to allow you to temporarily override this value when you do make substantial changes to your project (including a new header file, new module with dependencies, etc.) and want to rebuild the dependency tracking file. You’ll be able to use the following command:
$ NO_MAKEDEP= make
Otherwise, make clean app
will of course force the recompilation of your project.
Erlang.mk can also keep track of the source files generated by other means, for example if you generate code from a data file in your repository.
6.9. Generating Erlang source
Erlang.mk provides hooks at different stages of the build process. When your goal is to generate Erlang source files, you can add your own rules before or after the dependency tracking file is generated. To do this, you would add your hook before or after including the erlang.mk file.
The easiest way is after:
PROJECT = example include erlang.mk $(PROJECT).d:: src/generated_mod.erl src/generated_mod.erl:: gen-mod.sh $(gen_verbose) ./gen-mod.sh $@
In this case we use $(gen_verbose)
to hide the details of the build by default. Erlang.mk will simply say what file is it currently generating.
When using an external script to generate the Erlang source file, it is recommended to depend on that script, so that the source file gets generated again when the script gets modified.
If for whatever reason you prefer to hook before including Erlang.mk, don’t forget to set the .DEFAULT_GOAL
variable, otherwise nothing will get built:
PROJECT = example .DEFAULT_GOAL = all $(PROJECT).d:: src/generated_mod.erl include erlang.mk src/generated_mod.erl:: gen-mod.sh $(gen_verbose) ./gen-mod.sh $@
6.10. Cleaning
Building typically involves creating a lot of new files. Some are reused in rebuilds, some are simply replaced. All can be removed safely.
Erlang.mk provides two commands to remove them: clean
and distclean
. clean
removes all the intermediate files that were created as a result of building, including the BEAM files, the dependency tracking file and the generated documentation. distclean
removes these and more, including the downloaded dependencies, Dialyzer’s PLT file and the generated release, putting your directory back to the state it was before you started working on it.
To clean:
$ make clean
Or distclean:
$ make distclean
That is the question.
Note that Erlang.mk will automatically clean some files as part of other targets, but it will never run distclean
if you don’t explicitly use it.