如果你在Ubuntu 18.04操作系统中有蓝牙鼠标连接失败问题,那就参考下面的解决方法处理。
解决方法
首先在系统终端下输入:
bluetoothctl
然后输入:
list
看清除 Controller 的 mac 地址,我的是 AC:2B:6E:91:65:4E,在终端输入:
select AC:2B:6E:91:65:4E
然后输入:
show
此时确保你的鼠标配对已打开,处于可被发现状态,输入:
scan on
在输出信息中找到你的鼠标后,即可输入:
scan off
并记下你鼠标的mac地址,如果你的鼠标连接时要求 pin code,则输入以下命令,若不用则跳过这一条(当然不确定的话需不需要 pin code 就执行一下,也没什么影响的)。
agent on
接下来使用上一条记下的鼠标mac地址,输入:
pair DC:2C:26:AE:35:41
出现 Pairing successful,即配对成功,中间要求 pin code, 就输入对应 pin code即可。这时配对成功,但是鼠标还不能操作,依次输入:
connect DC:2C:26:AE:35:41
trust DC:2C:26:AE:35:41
鼠标即可正常使用了。
参考:Bluetooth Mouse Won't Connect after Reboot - Ubuntu 18.04 LTS
device: Bluetooth Mouse M336/M337/M535
problem: mouse won't pair after restarting computer
resolution:
I have also included them below along with the additional steps I needed to perform.
// open up a command prompt and use the bluetoothctl command
// list the available bluetooth controllers
# bluetoothctl
[bluetooth]# list
Controller 01:23:45:67:89:AB fzidpc73
// choose the controller to work with
[bluetooth]# select 01:23:45:67:89:AB
// show/display the controller details
bluetooth]# show
Controller 01:23:45:67:89:AB
Name: fzidpc73
Alias: fzidpc73-0
Class: 0x000000
Powered: no
Discoverable: no
Pairable: yes
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d0517
Discovering: no
[bluetooth]# power on
[CHG] Controller 01:23:45:67:89:AB Class: 0x000104
Changing power on succeeded
[CHG] Controller 01:23:45:67:89:AB Powered: yes
// scan for bluetooth devices (make sure your mouse is in discovery mode before running this command)
[bluetooth]# scan on
Discovery started
[CHG] Controller 01:23:45:67:89:AB Discovering: yes
[NEW] Device 34:88:5D:87:C0:A6 Bluetooth Mouse M336/M337/M535
[bluetooth]# scan off
Discovery stopped
[CHG] Controller 01:23:45:67:89:AB Discovering: no
// turn the agent on just incase you need to supply a pin code[bluetooth]# agent on
Agent registered
// note that the device might not ask you for a pin code
[bluetooth]# pair 34:88:5D:87:C0:A6
Attempting to pair with 34:88:5D:87:C0:A6
[CHG] Device 34:88:5D:87:C0:A6 Connected: yes
Request PIN code
[agent] Enter PIN code: 1234
[CHG] Device 34:88:5D:87:C0:A6 UUIDs:
00001101-0000-1000-8000-00805f9b34fb
[CHG] Device 34:88:5D:87:C0:A6 Paired: yes
Pairing successful
[CHG] Device 34:88:5D:87:C0:A6 Connected: no
// once you have done this use the following two commands to
// complete setup
[bluetooth]# connect 34:88:5D:87:C0:A6
...
[bluetooth]# trust 34:88:5D:87:C0:A6
...
// your mouse should now work properly even after the computer has been restarted.
相关主题