第一步：准备
1. 操作系统
CentOS-7-x86_64-Everything-1511
2. 安装包
kafka_2.12-0.10.2.0.tgz
zookeeper-3.4.9.tar.gz
3. Java 环境
Zookeeper 和 Kafka 的运行都需要 Java 环境，Kafka 默认使用 G1 垃圾回收器。如果不更改垃圾回收期，官方推荐使用 7u51 以上版本的 JRE 。如果使用老版本的 JRE，需要更改 Kafka 的启动脚本，指定 G1 以外的垃圾回收器。
本文使用系统自带的 Java 环境。
第二步：Zookeeper 集群搭建
1. 简介
Kafka 依赖 Zookeeper 管理自身集群（Broker、Offset、Producer、Consumer等），所以先要安装 Zookeeper。
为了达到高可用的目的，Zookeeper 自身也不能是单点，接下来就介绍如何搭建一个最小的 Zookeeper 集群（3个 zk 节点）。
2. 安装
# tar zxvf zookeeper-3.4.9.tar.gz # mv zookeeper-3.4.9 zookeeper
3. 配置
1）配置文件位置
路径：zookeeper/conf
2）生成配置文件
将 zoo_sample.cfg 复制一份，命名为 zoo.cfg，此即为Zookeeper的配置文件。
# cd zookeeper
# cd conf
# cp zoo_sample.cfg zoo.cfg
3）编辑配置文件
默认配置：
配置完成：
# The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. # do not use /tmp for storage, /tmp here is just # example sakes. dataDir=/root/zookeeper/data
dataLogDir=/root/zookeeper/logs # the port at which the clients will connect clientPort=2181 # the maximum number of client connections. # increase this if you need to handle more clients #maxClientCnxns=60 # # Be sure to read the maintenance section of the # administrator guide before turning on autopurge. # # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance # # The number of snapshots to retain in dataDir #autopurge.snapRetainCount=3 # Purge task interval in hours # Set to "0" to disable auto purge feature #autopurge.purgeInterval=1 server.0=192.168.6.128:4001:4002 server.1=192.168.6.129:4001:4002 server.2=192.168.6.130:4001:4002
说明：
- dataDir 和 dataLogDir 需要在启动前创建完成
- clientPort 为 zookeeper的服务端口
- server.0、server.1、server.2 为 zk 集群中三个 node 的信息，定义格式为 hostname:port1:port2，其中 port1 是 node 间通信使用的端口，port2 是node 选举使用的端口，需确保三台主机的这两个端口都是互通的。
4. 更改日志配置
Zookeeper 默认会将控制台信息输出到启动路径下的 zookeeper.out 中，通过如下方法，可以让 Zookeeper 输出按尺寸切分的日志文件：
1）修改conf/log4j.properties文件，将
zookeeper.root.logger=INFO, CONSOLE
改为
zookeeper.root.logger=INFO, ROLLINGFILE
2）修改bin/zkEnv.sh文件，将
ZOO_LOG4J_PROP="INFO,CONSOLE"
改为
ZOO_LOG4J_PROP="INFO,ROLLINGFILE"
5. 按照上述操作，在另外两台主机上安装并配置 zookeeper
6. 创建 myid 文件
分别在三台主机的 dataDir 路径下创建一个文件名为 myid 的文件，文件内容为该 zk 节点的编号。
例如，在第一台主机上建立的 myid 文件内容是 0，第二台是 1。
7. 启动
启动三台主机上的 zookeeper 服务
# cd bin
# ./zkServer.sh start
返回信息：
8. 查看集群状态
3个节点启动完成后，可依次执行如下命令查看集群状态：
./zkServer.sh status
192.168.6.128 返回：
192.168.6.129 返回：
192.168.6.130 返回：
如上所示，3个节点中，有1个 leader 和两个 follower。
9. 测试集群高可用性
1）停掉集群中的为 leader 的 zookeeper 服务，本文中的leader为 server2。
# ./zkServer.sh stop
返回信息：
2）查看集群中 server0 和 server1 的的状态
server0：
server1：
此时，server1 成为了集群中的 leader，server0依然为 follower。
3）启动 server2 的 zookeeper 服务，并查看状态
此时，server2 成为了集群中的 follower。
此时，Zookeeper 集群的安装及高可用性验证已完成！
第三步：Kafka 集群搭建
1. 简介
本文会安装配置一个具有两个 Broker 组成的 Kafka 集群，并在其上创建一个具有两个分区的Topic。
2. 安装
# tar zxvf kafka_2.12-0.10.2.0.tgz # mv kafka_2.12-0.10.2.0 kafka
3. 配置
1）配置文件位置
路径：kafka/config/server.properties
2）默认配置
# Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # see kafka.server.KafkaConfig for additional details and defaults ############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker. broker.id=0 # Switch to enable topic deletion or not, default value is false #delete.topic.enable=true ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from # java.net.InetAddress.getCanonicalHostName() if not configured. # FORMAT: # listeners = listener_name://host_name:port # EXAMPLE: # listeners = PLAINTEXT://your.host.name:9092 #listeners=PLAINTEXT://:9092 # Hostname and port the broker will advertise to producers and consumers. If not set, # it uses the value for "listeners" if configured. Otherwise, it will use the value # returned from java.net.InetAddress.getCanonicalHostName(). #advertised.listeners=PLAINTEXT://your.host.name:9092 # Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details #listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL # The number of threads handling network requests num.network.threads=3 # The number of threads doing disk I/O num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM) socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files log.dirs=/tmp/kafka-logs # The default number of log partitions per topic. More partitions allow greater # parallelism for consumption, but this will also result in more files across # the brokers. num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown. # This value is recommended to be increased for installations with data dirs located in RAID array. num.recovery.threads.per.data.dir=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync # the OS cache lazily. The following configurations control the flush of data to disk. # There are a few important trade-offs here: # 1. Durability: Unflushed data may be lost if you are not using replication. # 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush. # 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks. # The settings below allow one to configure the flush policy to flush data after a period of time or # every N messages (or both). This can be done globally and overridden on a per-topic basis. # The number of messages to accept before forcing a flush of data to disk #log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush #log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can # be set to delete segments after a period of time, or after a given size has accumulated. # A segment will be deleted whenever *either* of these criteria are met. Deletion always happens # from the end of the log. # The minimum age of a log file to be eligible for deletion due to age log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log as long as the remaining # segments don't drop below log.retention.bytes. Functions independently of log.retention.hours. #log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created. log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according # to the retention policies log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details). # This is a comma separated host:port pairs, each corresponding to a zk # server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002". # You can also append an optional chroot string to the urls to specify the # root directory for all kafka znodes. zookeeper.connect=localhost:2181 # Timeout in ms for connecting to zookeeper zookeeper.connection.timeout.ms=6000
3）更改配置
############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker. broker.id=0 # Switch to enable topic deletion or not, default value is false #delete.topic.enable=true ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from # java.net.InetAddress.getCanonicalHostName() if not configured. # FORMAT: # listeners = listener_name://host_name:port # EXAMPLE: # listeners = PLAINTEXT://your.host.name:9092 listeners=PLAINTEXT://:9092 port=9092 host.name=192.168.6.128 advertised.host.name=192.168.6.128 advertised.port=9092 # Hostname and port the broker will advertise to producers and consumers. If not set, # it uses the value for "listeners" if configured. Otherwise, it will use the value # returned from java.net.InetAddress.getCanonicalHostName(). #advertised.listeners=PLAINTEXT://your.host.name:9092 # Maps listener names to security protocols, the default is for them to be the same. See the config docume ntation for more details #listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SS L # The number of threads handling network requests num.network.threads=3 # The number of threads doing disk I/O num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM) socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files log.dirs=/root/kafka/logs # The default number of log partitions per topic. More partitions allow greater # parallelism for consumption, but this will also result in more files across # the brokers. num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown . # This value is recommended to be increased for installations with data dirs located in RAID array. num.recovery.threads.per.data.dir=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync # the OS cache lazily. The following configurations control the flush of data to disk. # There are a few important trade-offs here: # 1. Durability: Unflushed data may be lost if you are not using replication. # 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush. # 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may le ad to exceessive seeks. # The settings below allow one to configure the flush policy to flush data after a period of time or # every N messages (or both). This can be done globally and overridden on a per-topic basis. # The number of messages to accept before forcing a flush of data to disk #log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush #log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can # be set to delete segments after a period of time, or after a given size has accumulated. # A segment will be deleted whenever *either* of these criteria are met. Deletion always happens # from the end of the log. # The minimum age of a log file to be eligible for deletion due to age log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log as long as the remaining # segments don't drop below log.retention.bytes. Functions independently of log.retention.hours. #log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created. log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according # to the retention policies log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details). # This is a comma separated host:port pairs, each corresponding to a zk # server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002". # You can also append an optional chroot string to the urls to specify the # root directory for all kafka znodes. zookeeper.connect=192.168.6.128:2181,192.168.6.129:2181,192.168.6.130:2181 # Timeout in ms for connecting to zookeeper zookeeper.connection.timeout.ms=6000
配置的详细说明请参考官方文档：http://kafka.apache.org/documentation.html#brokerconfigs
注意：按照官方文档的说法，advertised.host.name 和 advertised.port 这两个参数用于定义集群向 Producer 和 Consumer 广播的节点 host 和 port，如果不定义，会默认使用 host.name 和 port 的定义。但在实际应用中，发现如果不定义 advertised.host.name 参数，使用 Java 客户端从远端连接集群时，会发生连接超时，抛出异常：org.apache.kafka.common.errors.TimeoutException: Batch Expired
经过过 debug 发现，连接到集群是成功的，但连接到集群后更新回来的集群 meta 信息却是错误的。metadata 中的 Cluster 信息中节点的 hostname 是一串字符，而不是实际的ip地址。这串其实是远端主机的 hostname，这说明在没有配置 advertised.host.name 的情况下，Kafka 并没有像官方文档宣称的那样改为广播我们配置的 host.name，而是广播了主机配置的 hostname 。远端的客户端并没有配置 hosts，所以自然是连接不上这个 hostname 的。要解决这一问题，把 host.name 和 advertised.host.name 都配置成绝对的 ip 地址就可以了。
4. 在另一台主机上安装 kafka，并做配置
5. 在两台主机上分别启动 Kafka 服务
# bin/kafka-server-start.sh -daemon config/server.properties
官方给出的启动方法是：bin/kafka-server-start.sh config/server.properties &
6. 创建分区和 topic
1）创建一个名为 ruready，拥有两个分区，两个副本的Topic
# bin/kafka-topics.sh --create --zookeeper 192.168.6.128:2181,192.168.6.129:2181,192.168.6.130:2181 --replication-factor 2 --partitions 2 --topic ruready
返回信息：
2）查看 Topic 状态
# bin/kafka-topics.sh --describe --zookeeper 192.168.6.128:2181,192.168.6.129:2181,192.168.6.130:2181 --topic ruready
返回信息：
4653
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
