nagios监控多个磁盘空间

ngios默认监控第一个磁盘分区，需要在service中定义多个监控项，如：

define service {
                service_description                   check_disk3
                max_check_attempts                    3
                check_interval                        1
                retry_interval                        3
                notification_interval                 0
                notification_options                  w,u,c,r,f,s
                notifications_enabled                 1
                check_command                         check_nrpe!check_disk3
                check_period                          24x7
                notification_period                   24x7
                host_name                             AFA_EBS_DB
}
define service {
                service_description                   check_disk4
                max_check_attempts                    3
                check_interval                        1
                retry_interval                        3
                notification_interval                 0
                notification_options                  w,u,c,r,f,s
                notifications_enabled                 1
                check_command                         check_nrpe!check_disk4
                check_period                          24x7
                notification_period                   24x7
                host_name                             AFA_EBS_DB

然后再监控机上配置这些项即可，如：

command[check_disk3]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/emcpowera1
command[check_disk4]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/emcpowerb1
command[check_disk5]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sdb1
command[check_disk6]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/emcpowerc1

分别重启监控端和被监控段的服务即可

效果如下：

转载于:https://blog.51cto.com/wangfeng7399/1588170