1、新的板卡需要设置显示输出
接串口调试终端,启动系统,在启动等待界面按任意键,1 -- set mxcfb0 parameters 选择4 -- 1280x800-10-LVDS, 2 -- set mxcfb1 parameters选择O -- Off, 3 -- set ldb mode选择1 -- sin0 ,完成后重启即可
2、永久修改ip
vi /etc/network/interfaces
然后在vi /etc/rc.local 即可
3、飞凌虚拟机ubuntu交叉编译QT5程序,在ubuntu中切换到root用户, 在终端执行 source /root/qt5.sh