1、去官网下载samba-3.0.32.tar.gz包
2、然后默认地配置、安装,如下:
[root@localhost src]# cd samba-3.0.32
[root@localhost samba-3.0.32]# cd source/
[root@localhost source]# ./configure
[root@localhost source]# make;make install
[root@localhost samba-3.0.32]# cd /usr/local/samba/
[root@localhost samba]# ls
bin   include   lib   private   sbin   share   swat   var
[root@localhost samba]# cp bin/*     /bin/
[root@localhost samba]# cp sbin/*   /sbin/
[root@localhost samba-3.0.32]# cp examples/smb.conf.default    /etc/smb.conf
[root@localhost samba]# cp /root/src/samba-3.0.32/packaging/RHEL/setup/swat    /etc/xinetd.d/swat
[root@localhost samba]# cat /etc/xinetd.d/swat
# default: off
# description: SWAT is the Samba Web Admin Tool. Use swat \
#              to configure your Samba server. To use SWAT, \
#              connect to port 901 with your favorite web browser.
service swat
{
        disable = no
        port            = 901
        socket_type     = stream
        wait            = no
        only_from       = 192.168.1.0   <——-设置成了让192.168.1.0网段内的主机可以访问
        user            = root
        server          = /usr/sbin/swat
        log_on_failure  += USERID
}
[root@localhost samba]# chkconfig swat –list
swat            off
[root@localhost samba]# chkconfig swat on
[root@localhost samba]# chkconfig swat –list
swat            on
[root@localhost samba]# chkconfig xinetd –list
xinetd          0:off   1:off   2:off   3:on    4:on    5:on    6:off
[root@localhost samba]# service xinetd restart
Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                            [  OK  ]

[root@localhost samba]# netstat -tln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 0.0.0.0:1024            0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:1089          0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:901             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN

打开192.168.1.0网段中的任意一台主机的浏览器,输入samba服务器的IP地址及端口号,

Samba-Swat-UI

这样就可以在任意一台同网段的主机里管理samba服务器了,对于Swat里的选项的配置,我在这里就不多说了,一看便知。