PPPoE server 配置 Un-numbered Mode

最新推荐文章于 2023-03-05 23:38:14 发布

weixin_34342207

最新推荐文章于 2023-03-05 23:38:14 发布

阅读量128

点赞数

文章标签： python

原文链接：https://my.oschina.net/xxjbs001/blog/287956

版权

2019独角兽企业重金招聘Python工程师标准>>>

Un-numbered Mode IP Segment:
Subent Mask: 29, (255.255.255.248)
Network IP: 100.100.88.120 (reserved)
Broadcast IP: 100.100.88.127 (reserved)
Gateway IP: 100.100.88.121
Usable Range of LAN Devices: 100.100.88.122~100.100.88.126

1. PPPoE Authentication Configuration:
vim /etc/ppp/chap-secrets
unnumbered1     *       111111                    100.100.88.121
unnumbered2     *       111111           100.100.88.177
unnumbered3   *   111111           100.100.88.185
unnumbered4   *   111111           100.100.88.193
unnumbered5   *   111111           100.100.88.201
unnumbered6   *   111111           100.100.88.209
unnumbered7   *   111111           100.100.88.217
unnumbered8     *       111111           100.100.88.233

2. Enable PPPoE server
pppoe-server -L 10.18.99.1 -R 10.18.99.2 -I p2p1

3. Add NAT rule:
iptables -t nat -A POSTROUTING -s 100.100.88.120/29 -o eth0 -j SNAT --to-source 192.168.10.108

4. Add Routing item:
ip route add 100.100.88.120/29 dev ppp0

#Appendix:
#PPPoE Server Network Settings:
#eth0: 192.168.125.250/24
#ppp0: 192.168.100.1

转载于:https://my.oschina.net/xxjbs001/blog/287956