创建MM

SVC : ITSO_SVC1  ;  ITSO_SVC4

consistency group： CG_W2K3_MM

操作目标：

– Master: MM_DB_Pri

– Auxiliary: MM_DB_Sec

– Auxiliary SAN Volume Controller system: ITSO_SVC4

– Name: MMREL1

– Consistency Group: CG_W2K3_MM

– Master: MM_App_Pri

– Auxiliary: MM_App_Sec

– Auxiliary SAN Volume Controller system: ITSO_SVC4

– Name: MMREL3

首先通过 lspartnershipcandidate 和lspartnership 两个命令查看可建立伙伴关系的cluster

1 建立伙伴关系

 > svctask mkpartnership -bandwidth 50 ITSO_SVC4

 > svcinfo lscluster

  对端：

  > svctask mkpartnership -bandwidth 50 ITSO_SVC1

  > lspartnership

      （状态从partially_configured到full_configured才对）

2  建立一致性组

   >svctask mkrcconsistgrp -cluster ITSO_SVC4 -name CG_W2K3_MM

   >lsrcconsistgrp

3 设置磁盘间的对应关系

   通过lsvdisk  和lsrcrelationshipcandidate 来确认对端磁盘是否符合要求:

  > lsvdisk -filtervale name=MM*

  > lsrcrelationshipcandidate

  > lscrelationshipcandidate -aux ITSO_SVC4 -master MM_DB_Pri

   建立：

   > mkrcrelationship -master MM_DB_Pri -aux MM_DB_Sec -cluster ITSO_SVC4 -consistgrp CG_W2K3_MM -name MMREL1

   > lsrcrelationship

4 启动MM

  > startrcconsistgrp CG_W2K3_MM

  > lsrcconsistgrp 

 查看拷贝的进度：

   >lsrcrelationship MMREL1

 查看一致性组信息

  > lsrcconsistgrp CG_W2K3_MM

注：  也可以创建单独的relationship盘，不用组来建。

   >mkrclelationship -master MM_App_Pri -aux MM_App_Sec -sync -cluster ITSO_SVC4 -name MMREL3

   >startrcrelationship MMREL3

   >lsrcrelationship MMREL3