交换机密码恢复
1.拔掉电源插头
2.重新插好电源后,立刻按住交换机上的“mode”键,直到显示”switch:”命令提示
3.使用提示命令“flash_init”初始化Flash
4.将config.text文件名改为config.old
Switch:rename flash:config.text flash:config.old
5.重启交换机
Switch:boot
6.把配置文件的名字改回来
Switch:rename flash:config.old flash:config.text
7.手工加载配置文件
Switch#copy flash:config.text system:running-config
8.配置文件加载完成后,需进入配置模式修改密码,最后保存配置,完成密码修复。
恢复IOS
1.Switch:flash_init
2. Switch: copy Xmodem: flash:c2960-lanbase-mz.1222-35.se5.bin
3.设置超级终端的Xmodem选项,选择1K/s
4.reboot
转载于:https://blog.51cto.com/miaoyuanqiang/1639805