/// <summary> /// 执行开钱箱操作 /// 没钱箱或打印机原功能都可以正常使用 /// </summary> public void ExecuteOpenCashBoxOperate() { string l_strDefaultPortName = ""; string l_strDefaultBrand = ""; if (serverCommon.ReadLocalSet("PrintSet", "UseCashBox", "0") == "0") {//如果不使用钱箱直接退出,默认不使用钱箱 return; } try { //获取默认打印机的相关信息 string l_strSQL = string.Format("SELECT * from Win32_Printer where default = true "); ManagementObjectSearcher searcher = new ManagementObjectSearcher(l_strSQL); ManagementObjectCollection printers = searcher.Get(); foreach (ManagementObject print in printers) { l_strDefaultPortName = print["PortName"].ToString(); l_strDefaultBrand = print["DriverName"].ToString();//驱动名称不能冲突 做为识别牌子的标准 } if (string.IsNullOrEmpty(l_strDefaultPortName)) return; string l_strNetIP = serverCommon.ReadLocalSet("PrintSet", "NetIP", "192.168.0.31"); string l_strNetPort = serverCommon.ReadLocalSet("PrintSet", "NetPort", "9100"); string l_strBaudRate = serverCommon.ReadLocalSet("PrintSet", "BaudRate", "38400"); string l_strDataBits = serverCommon.ReadLocalSet("PrintSet", "DataBits", "128"); int l_intPortCOM = Int32.Parse(serverCommon.ReadLocalSet("PrintSet", "PortCOM", "2")); int l_intBaudRateCOM = Int32.Parse(serverCommon.ReadLocalSet("PrintSet", "BaudRateCOM", "9600")); int l_intDataBitsCOM = Int32.Parse(serverCommon.ReadLocalSet("PrintSet", "DataBitsCOM", "8")); if (l_strDefaultBrand.IndexOf("BTP") > -1 && l_strDefaultPortName.IndexOf("USB") > -1) { OpenBYCashBox(); } else if (l_strDefaultBrand.IndexOf("GP") > -1 && l_strDefaultPortName.IndexOf("IP") > -1) { OpenJBCashBox(l_strNetIP, l_strNetPort); } else if (l_strDefaultBrand.IndexOf("EPSON") > -1) { OpenEPSONCashBox(l_intPortCOM, l_intBaudRateCOM, l_intDataBitsCOM); //OpenEPSONCashBox(2,9600,8); } } catch { } finally {// 当WMI 服务关闭的时候 } } private void OpenBYCashBox() { bool IsOpen = false; BeiYangOPOS BYOPOS = new BeiYangOPOS(); try { IsOpen = BYOPOS.OpenUSBPort("BYUSB-0"); if (IsOpen) { IntPtr res = BeiYangOPOS.POS_KickOutDrawer(0x00, 100, 80); } } finally { BYOPOS.ClosePrinterPort(); } } private void OpenJBCashBox(string a_strNetIP, string a_strPort) { IPAddress ServeIP = IPAddress.Parse(a_strNetIP); IPEndPoint remoteEP = new IPEndPoint(ServeIP, Int32.Parse(a_strPort)); Socket clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); try { clientSocket.Connect(remoteEP); byte[] byteA = new byte[] { 0x1B, 0x70, 0x00, 0x80, 0xFF };//据说是佳博所有版本通用命令 //byte[] byteA = new byte[] { 0x10, 0x14, 0x01, 0x01, 0x03 }; clientSocket.Send(byteA); } finally { clientSocket.Close(); } } private void OpenEPSONCashBox(int a_strPortName, int a_intBaudRate, int a_intDataBits) { System.IO.Ports.SerialPort sp = new System.IO.Ports.SerialPort(); sp.PortName = "COM" + a_strPortName.ToString(); sp.BaudRate = a_intBaudRate; sp.DataBits = a_intDataBits; sp.ReadTimeout = 2000; sp.Parity = System.IO.Ports.Parity.None; sp.StopBits = System.IO.Ports.StopBits.OnePointFive; try { sp.Open(); byte[] byteA = { 0x1B, 0x70, 0x00, 0x45, 0x45 }; sp.Write(byteA, 0, byteA.Length); System.Threading.Thread.Sleep(100); } finally {//如果端口被占用需要重新设置 sp.Close(); } }
读取配置文件的类
![](https://i-blog.csdnimg.cn/blog_migrate/961ddebeb323a10fe0623af514929fc1.gif)
class LocalSet
{
private const string CONFIGFILE = "Config.ini"; //配置文件的文件名
/// <summary>
/// 获取指定配置文件内的指定项目的指定设置的设定值
/// </summary>
/// <param name="lpApplicationName">项目名</param>
/// <param name="lpKeyName">设置名</param>
/// <param name="lpDefault">默认值</param>
/// <param name="lpReturnedString">返回值</param>
/// <param name="nSize">返回值大小</param>
/// <param name="lpFileName">配置文件路径</param>
/// <returns>返回设定值长度</returns>
[DllImport("kernel32.dll", CharSet = CharSet.Auto, EntryPoint = "GetPrivateProfileStringA")]
private static extern int GetPrivateProfileString([In, MarshalAs(UnmanagedType.LPStr)] string lpApplicationName, [In, MarshalAs(UnmanagedType.LPStr)] string lpKeyName, [In, MarshalAs(UnmanagedType.LPStr)] string lpDefault, [Out, MarshalAs(UnmanagedType.LPStr)] StringBuilder lpReturnedString, uint nSize, [In, MarshalAs(UnmanagedType.LPStr)] string lpFileName);
/// <summary>
/// 设置指定配置文件内的指定项目的指定设置的设定值
/// </summary>
/// <param name="lpApplicationName">项目名</param>
/// <param name="lpKeyName">设置名</param>
/// <param name="lpString">设定值</param>
/// <param name="lpFileName">配置文件路径</param>
/// <returns>返回设定值长度</returns>
[DllImport("kernel32.dll", CharSet = CharSet.Auto, EntryPoint = "WritePrivateProfileStringA")]
private static extern int WritePrivateProfileString([In, MarshalAs(UnmanagedType.LPStr)] string lpApplicationName, [In, MarshalAs(UnmanagedType.LPStr)] string lpKeyName, [In, MarshalAs(UnmanagedType.LPStr)] string lpString, [In, MarshalAs(UnmanagedType.LPStr)] string lpFileName);
/// <summary>
/// 获取指定配置文件内的指定项目的指定设置的设定值
/// </summary>
/// <param name="section">项目名</param>
/// <param name="keyName">设置名</param>
/// <param name="defaultValue">默认值</param>
/// <returns>设定值</returns>
public static string ReadLocalSet(string section, string keyName, string defaultValue)
{
StringBuilder strTemp = new StringBuilder(256);
string strPath = null;
strPath = System.Windows.Forms.Application.StartupPath;
strPath += (strPath.Substring(strPath.Length - 1) == "\\" ? CONFIGFILE : "\\" + CONFIGFILE);
int intReturn = GetPrivateProfileString(section, keyName, "", strTemp, (uint)strTemp.Capacity, strPath);
if (intReturn > 0)
{
return strTemp.ToString();
}
else
{
WritePrivateProfileString(section, keyName, defaultValue, strPath);
return defaultValue;
}
}
/// <summary>
/// 设置指定配置文件内的指定项目的指定设置的设定值
/// </summary>
/// <param name="section">项目名</param>
/// <param name="keyName">设置名</param>
/// <param name="value">设定值</param>
public static void WriteLocalSet(string section, string keyName, string value)
{
string strPath = null;
strPath = System.Windows.Forms.Application.StartupPath;
strPath += (strPath.Substring(strPath.Length - 1) == "\\" ? CONFIGFILE : "\\" + CONFIGFILE);
WritePrivateProfileString(section, keyName, value, strPath);
}
}
}
class LocalSet { private const string CONFIGFILE = "Config.ini"; //配置文件的文件名 /// <summary> /// 获取指定配置文件内的指定项目的指定设置的设定值 /// </summary> /// <param name="lpApplicationName">项目名</param> /// <param name="lpKeyName">设置名</param> /// <param name="lpDefault">默认值</param> /// <param name="lpReturnedString">返回值</param> /// <param name="nSize">返回值大小</param> /// <param name="lpFileName">配置文件路径</param> /// <returns>返回设定值长度</returns> [DllImport("kernel32.dll", CharSet = CharSet.Auto, EntryPoint = "GetPrivateProfileStringA")] private static extern int GetPrivateProfileString([In, MarshalAs(UnmanagedType.LPStr)] string lpApplicationName, [In, MarshalAs(UnmanagedType.LPStr)] string lpKeyName, [In, MarshalAs(UnmanagedType.LPStr)] string lpDefault, [Out, MarshalAs(UnmanagedType.LPStr)] StringBuilder lpReturnedString, uint nSize, [In, MarshalAs(UnmanagedType.LPStr)] string lpFileName); /// <summary> /// 设置指定配置文件内的指定项目的指定设置的设定值 /// </summary> /// <param name="lpApplicationName">项目名</param> /// <param name="lpKeyName">设置名</param> /// <param name="lpString">设定值</param> /// <param name="lpFileName">配置文件路径</param> /// <returns>返回设定值长度</returns> [DllImport("kernel32.dll", CharSet = CharSet.Auto, EntryPoint = "WritePrivateProfileStringA")] private static extern int WritePrivateProfileString([In, MarshalAs(UnmanagedType.LPStr)] string lpApplicationName, [In, MarshalAs(UnmanagedType.LPStr)] string lpKeyName, [In, MarshalAs(UnmanagedType.LPStr)] string lpString, [In, MarshalAs(UnmanagedType.LPStr)] string lpFileName); /// <summary> /// 获取指定配置文件内的指定项目的指定设置的设定值 /// </summary> /// <param name="section">项目名</param> /// <param name="keyName">设置名</param> /// <param name="defaultValue">默认值</param> /// <returns>设定值</returns> public static string ReadLocalSet(string section, string keyName, string defaultValue) { StringBuilder strTemp = new StringBuilder(256); string strPath = null; strPath = System.Windows.Forms.Application.StartupPath; strPath += (strPath.Substring(strPath.Length - 1) == "\\" ? CONFIGFILE : "\\" + CONFIGFILE); int intReturn = GetPrivateProfileString(section, keyName, "", strTemp, (uint)strTemp.Capacity, strPath); if (intReturn > 0) { return strTemp.ToString(); } else { WritePrivateProfileString(section, keyName, defaultValue, strPath); return defaultValue; } } /// <summary> /// 设置指定配置文件内的指定项目的指定设置的设定值 /// </summary> /// <param name="section">项目名</param> /// <param name="keyName">设置名</param> /// <param name="value">设定值</param> public static void WriteLocalSet(string section, string keyName, string value) { string strPath = null; strPath = System.Windows.Forms.Application.StartupPath; strPath += (strPath.Substring(strPath.Length - 1) == "\\" ? CONFIGFILE : "\\" + CONFIGFILE); WritePrivateProfileString(section, keyName, value, strPath); } } }
北洋打印机类
![](https://i-blog.csdnimg.cn/blog_migrate/961ddebeb323a10fe0623af514929fc1.gif)
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Runtime.InteropServices;
using System.IO.Ports;
using System.Drawing.Printing;
namespace ××××××××××××××
{
/// <summary>
/// 北洋OPOS指令集二次开发包DLL调用
///
/// 备注:
/// 因为北洋的demo包里没有C#的,所以参考delphi包的代码转成了C#的.
/// 北洋的dll支持市面上所有的 支持ESC/ POS指令的小票打印机的打印(EPSON,佳博,中崎等)
///
/// 如果有任何修改请邮件通知本人,欢迎志同道合的朋友共同交流;
/// coder: 萧远峰 mail: 71008973@qq.com
///
/// POSDLL 动态库的出口函数是用来直接控制 POS 打印机工作的,
/// 分为四个部分:通用函数、标准模式打印函数、页模式打印函数、调试等函数。
/// </summary>
public class BeiYangOPOS
{
const string _DllVer = "1.4";
private static PrintDocument fPrintDocument = new PrintDocument();
/// <summary>
/// 获取动态库版本号
/// </summary>
public string GetDllVer
{
get
{
return _DllVer;
}
}
/// <summary>
/// 设备打开后的句柄
/// </summary>
public IntPtr POS_IntPtr;
/// <summary>
/// 函数返回值
/// </summary>
public uint POS_SUCCESS = 1001;// 函数执行成功
public uint POS_FAIL = 1002; // 函数执行失败
public uint POS_ERROR_INVALID_HANDLE = 1101; // 端口或文件的句柄无效
public uint POS_ERROR_INVALID_PARAMETER = 1102;// 参数无效
public uint POS_ERROR_NOT_BITMAP = 1103; // 不是位图格式的文件
public uint POS_ERROR_NOT_MONO_BITMAP = 1104;// 位图不是单色的
public uint POS_ERROR_BEYONG_AREA = 1105;//位图超出打印机可以处理的大小
public uint POS_ERROR_INVALID_PATH = 1106; // 没有找到指定的文件路径或名
/// <summary>
/// 停止位
/// </summary>
public uint POS_COM_ONESTOPBIT = 0x00;//停止位为1
public uint POS_COM_ONE5STOPBITS = 0x01;//停止位为1.5
public uint POS_COM_TWOSTOPBITS = 0x02;//停止位为2
/// <summary>
/// 奇偶校验
/// </summary>
public uint POS_COM_NOPARITY = 0x00;//无校验
public uint POS_COM_ODDPARITY = 0x01;//奇校验
public uint POS_COM_EVENPARITY = 0x02;//偶校验
public uint POS_COM_MARKPARITY = 0x03;//标记校验
public uint POS_COM_SPACEPARITY = 0x04;//空格校验
/// <summary>
/// 其他COM口参数及端口类型定义
/// </summary>
public uint POS_COM_DTR_DSR = 0x00;// 流控制为DTR/DST
public uint POS_COM_RTS_CTS = 0x01;// 流控制为RTS/CTS
public uint POS_COM_XON_XOFF = 0x02;// 流控制为XON/OFF
public uint POS_COM_NO_HANDSHAKE = 0x03;//无握手
public uint POS_OPEN_PARALLEL_PORT = 0x12;//打开并口通讯端口
public uint POS_OPEN_BYUSB_PORT = 0x13;//打开USB通讯端口
public uint POS_OPEN_PRINTNAME = 0X14;// 打开打印机驱动程序
public uint POS_OPEN_NETPORT = 0x15;// 打开网络接口
public uint POS_CUT_MODE_FULL = 0x00;// 全切
public uint POS_CUT_MODE_PARTIAL = 0x01;// 半切
/// <summary>
/// 打开POS机的端口 开始会话
/// </summary>
/// <param name="lpName">
///指向以 null 结尾的打印机名称或端口名称。
///当参数nParam的值为POS_COM_DTR_DSR、POS_COM_RTS_CTS、POS_COM_XON_XOFF或POS_COM_NO_HANDSHAKE 时, “COM1”,“COM2”,“COM3”,“COM4”等表示串口;
///当参数nParam的值为POS_OPEN_PARALLEL_PORT时,“LPT1”,“LPT2”等表示并口;
///当参数nParam的值为POS_OPEN_BYUSB_PORT时,“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”等表示USB端口。
///当参数nParam的值为POS_OPEN_PRINTNAME时,表示打开指定的打印机。
///当参数nParam的值为POS_OPEN_NETPORT时,表示打开指定的网络接口,如“192.168.10.251”表示网络接口IP地址</param>
/// <param name="nComBaudrate">串口通信需要的波特率</param>
/// <param name="nComDataBits">串口通信需要的数据位</param>
/// <param name="nComStopBits">串口通信需要的停止位</param>
/// <param name="nComParity">串口通信需要的是否要奇偶校验</param>
/// <param name="nParam">指向以 null 结尾的打印机名称或端口名称。
/// 参数nParam的值为POS_COM_DTR_DSR、POS_COM_RTS_CTS、POS_COM_XON_XOFF或POS_COM_NO_HANDSHAKE 时,
/// “COM1”,“COM2”,“COM3”,“COM4”等表示串口;
/// 当参数nParam的值为POS_OPEN_PARALLEL_PORT时,“LPT1”,“LPT2”等表示并口;
/// 当参数nParam的值为POS_OPEN_BYUSB_PORT时,“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”等表示USB端口。
/// 当参数nParam的值为POS_OPEN_PRINTNAME时,表示打开指定的打印机。</param>
/// <returns>如果函数调用成功,返回一个已打开的端口句柄。如果函数调用失败,返回值为 INVALID_HANDLE_VALUE (-1)。</returns>
[DllImport("POSDLL.dll", CharSet = CharSet.Ansi)]
public static extern IntPtr POS_Open([MarshalAs(UnmanagedType.LPStr)]string lpName,
uint nComBaudrate,
uint nComDataBits,
uint nComStopBits,
uint nComParity,
uint nParam);
/// <summary>
/// 关闭已经打开的并口或串口,USB端口,网络接口或打印机。
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_Close();
/// <summary>
/// 复位打印机,把打印缓冲区中的数据清除,字符和行高的设置被清除,打印模式被恢复到上电时的缺省模式。
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_Reset();
/// <summary>
/// 设置打印机的移动单位。
/// </summary>
/// <param name="nHorizontalMU">把水平方向上的移动单位设置为 25.4 / nHorizontalMU 毫米。可以为0到255。</param>
/// <param name="nVerticalMU">把垂直方向上的移动单位设置为 25.4 / nVerticalMU 毫米。可以为0到255。</param>
/// <returns>
/// 如果函数成功,则返回值为 POS_SUCCESS。
/// 如果函数失败,则返回值为以下值之一:POS_FAIL POS_ERROR_INVALID_HANDLE POS_ERROR_INVALID_PARAMETER </returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetMotionUnit(uint nHorizontalMU, uint nVerticalMU);
/// <summary>
/// 选择国际字符集和代码页
/// </summary>
/// <param name="nCharSet">
/// 指定国际字符集。不同的国际字符集对0x23到0x7E的ASCII码值对应的符号定义是不同的。
/// 可以为以下列表中所列值之一。
/// 0x00 U.S.A 0x01 France 0x02 Germany 0x03 U.K. 0x04 Denmark I 0x05 Sweden
/// 0x06 Italy 0x07 Spain I 0x08 Japan 0x09 Nonway 0x0A Denmark II 0x0B Spain II
/// 0x0C Latin America 0x0D Korea </param>
/// <param name="nCodePage">
/// 指定字符的代码页。不同的代码页对0x80到0xFF的ASCII码值对应的符号定义是不同的。
/// 0x00 PC437 [U.S.A. Standard Europe 0x01 Reserved 0x02 PC850 [Multilingual]
/// 0x03 PC860 [Portuguese] 0x04 PC863 [Canadian-French] 0x05 PC865 [Nordic]
/// 0x12 PC852 0x13 PC858
/// </param>
/// <returns>
/// 如果函数成功,则返回值为 POS_SUCCESS。
/// 如果函数失败,则返回值为以下值之一:POS_FAIL POS_ERROR_INVALID_HANDLE POS_ERROR_INVALID_PARAMETER </returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetCharSetAndCodePage(uint nCharSet, uint nCodePage);
/// <summary>
/// POS字体样式
/// </summary>
///
public uint POS_FONT_TYPE_STANDARD = 0x00;// 标准 ASCII
public uint POS_FONT_TYPE_COMPRESSED = 0x01;// 压缩 ASCII
public uint POS_FONT_TYPE_UDC = 0x02; // 用户自定义字符
public uint POS_FONT_TYPE_CHINESE = 0x03; // 标准 “宋体”
public uint POS_FONT_STYLE_NORMAL = 0x00; // 正常
public uint POS_FONT_STYLE_BOLD = 0x08; // 加粗
public uint POS_FONT_STYLE_THIN_UNDERLINE = 0x80; // 1点粗的下划线
public uint POS_FONT_STYLE_THICK_UNDERLINE = 0x100; // 2点粗的下划线
public uint POS_FONT_STYLE_UPSIDEDOWN = 0x200; // 倒置(只在行首有效)
public uint POS_FONT_STYLE_REVERSE = 0x400; // 反显(黑底白字)
public uint POS_FONT_STYLE_SMOOTH = 0x800; // 平滑处理(用于放大时)
public uint POS_FONT_STYLE_CLOCKWISE_90 = 0x1000; // 每个字符顺时针旋转 90 度
/// <summary>
/// 把将要打印的字符串数据发送到打印缓冲区中,并指定X 方向(水平)上的绝对起始点位置,
/// 指定每个字符宽度和高度方向上的放大倍数、类型和风格。
/// </summary>
/// <param name="pszString">指向以 null 结尾的字符串缓冲区</param>
/// <param name="nOrgx">指定 X 方向(水平)的起始点位置离左边界的点数。</param>
/// <param name="nWidthTimes">指定字符的宽度方向上的放大倍数。可以为 1到 6。</param>
/// <param name="nHeightTimes">指定字符高度方向上的放大倍数。可以为 1 到 6。</param>
/// <param name="nFontType">指定字符的字体类型。</param>
/// <param name="nFontStyle">指定字符的字体风格。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_S_TextOut([MarshalAs(UnmanagedType.LPStr)]string pszString,
uint nOrgx, uint nWidthTimes, uint nHeightTimes,
uint nFontType, uint nFontStyle);
/// <summary>
/// 设置POS的打印模式 (只有两种 页模式和标准模式)
/// </summary>
/// <param name="nPrintMode">
/// POS_PRINT_MODE_STANDARD 0x00 标准模式(行模式)
/// POS_PRINT_MODE_PAGE 0x01 页模式
/// POS_PRINT_MODE_BLACK_MARK_LABEL 0x02 黑标记标签模式
/// POS_PRINT_MODE_WHITE_MARK_LABEL 0x03 白标记标签模式 </param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetMode(uint nPrintMode);
/// <summary>
/// 设置字符的行高。
/// </summary>
/// <param name="nDistance">指定行高点数。可以为 0 到 255。每点的距离与打印头分辨率相关。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetLineSpacing(uint nDistance);
/// <summary>
/// 设置字符的右间距(相邻两个字符的间隙距离)。
/// </summary>
/// <param name="nDistance">指定右间距的点数。可以为 0 到 255。每点的距离与打印头分辨率相关。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetRightSpacing(int nDistance);
/// <summary>
/// 向前走纸。
/// 1.如果在标准打印模式(行模式)下打印文本,则打印缓冲区中的数据,且打印位置自动移动到下一行的行首。
/// 2.如果在标准打印模式(行模式)下打印位图,则在指定的位置打印位图,且打印位置自动移动到下一行的行首。
/// 3.如果在页模式或标签模式下,则把需要打印的数据设置在指定的位置,同时把打印位置移动到下一个行首,
/// 但是并不立即进纸并打印,而是一直到调用 POS_PL_Print 函数时才打印。
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_FeedLine();
/// <summary>
/// 打印头换n行
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_FeedLines(uint nLines);
/// <summary>
/// 切纸
/// </summary>
/// <param name="nMode">模式编号 半切或是全切</param>
/// <param name="nDistance">走位的距离</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_CutPaper(uint nMode, uint nDistance);
/// <summary>
/// 设置右边距
/// </summary>
/// <param name="nDistance">右边距</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_SetRightSpacing(uint nDistance);
/// <summary>
/// 预下载一幅位图到打印机的 RAM 中,同时指定此位图的 ID 号。
/// </summary>
/// <param name="pszPath">指向以 null 结尾的表示位图路径及其文件名的字符串。</param>
/// <param name="nID">指定将要下载的位图的 ID 号。可以为 0 到 7。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PreDownloadBmpToRAM([MarshalAs(UnmanagedType.LPStr)]string pszPath, uint nID);
/// <summary>
/// 下载并打印位图
/// </summary>
/// <param name="pszPath">指向以null 结尾的包含位图文件路径及其名称的字符串。</param>
/// <param name="nOrgx">指定将要打印的位图和左边界的距离点数。可以为 0到 65535 点。</param>
/// <param name="nMode">指定位图的打印模式。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_S_DownloadAndPrintBmp([MarshalAs(UnmanagedType.LPStr)]string pszPath, uint nOrgx, uint nMode);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_S_PrintBmpInRAM(uint nID, uint nOrgx, uint nMode);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_S_PrintBmpInFlash(uint nID, uint nOrgx, uint nMode);
/// <summary>
/// 通过串口返回当前打印机的状态。此函数是实时的。
/// </summary>
/// <param name="address"></param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_RTQueryStatus(byte[] address);
/// <summary>
/// 通过串口查询打印机当前的状态。此函数是非实时的。
/// </summary>
/// <param name="pszStatus">
/// 指向返回的状态数据的缓冲区,缓冲区大小为 1 个字节。
/// 0,1 0/1 容纸器中有纸 / 纸将用尽 2,3 0/1 打印头处有纸 / 无纸
/// 4,5 0/1 钱箱连接器引脚 3 的电平为低 / 高(表示打开或关闭)
/// 6,7 0 保留(固定为0)
/// </param>
/// <param name="nTimeouts">设置查询状态时大约的超时时间(毫秒)。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_QueryStatus(byte[] pszStatus, int nTimeouts);
/// <summary>
/// 通过网络接口查询返回当前打印机的状态。
/// </summary>
/// <param name="ipAddress">设备IP地址。如“192.168.10.251”。</param>
/// <param name="pszStatus">
/// 指向接收返回状态的缓冲区,缓冲区大小为 1 个字节。
/// 0 0/1 钱箱连接器引脚 3 的电平为低/高(表示打开或关闭)
/// 1 0/1 打印机联机/脱机
/// 2 0/1 上盖关闭/打开
/// 3 0/1 没有/正在由Feed键按下而进纸
/// 4 0/1 打印机没有/有出错
/// 5 0/1 切刀没有/有出错
/// 6 0/1 有纸/纸将尽(纸将尽传感器探测)
/// 7 0/1 有纸/纸用尽(纸传感器探测)
/// </param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern int POS_NETQueryStatus([MarshalAs(UnmanagedType.LPStr)]string ipAddress, out Byte pszStatus);
/// <summary>
/// 设置并打印条码。
/// </summary>
/// <param name="pszInfo">指向以 null 结尾的字符串。每个字符允许的范围和格式与具体条码类型有关。</param>
/// <param name="nOrgx">指定将要打印的条码的水平起始点与左边界的距离点数。可以为 0 到65535。</param>
/// <param name="nType">
/// 指定条码的类型。可以为以下列表中所列值之一。
/// POS_BARCODE_TYPE_UPC_A 0x41 UPC-A POS_BARCODE_TYPE_UPC_E 0x42 UPC-C
/// POS_BARCODE_TYPE_JAN13 0x43 JAN13(EAN13) POS_BARCODE_TYPE_JAN8 0x44 JAN8(EAN8)
/// POS_BARCODE_TYPE_CODE39 0x45 CODE39 POS_BARCODE_TYPE_ITF 0x46 INTERLEAVED 2 OF 5
/// POS_BARCODE_TYPE_CODEBAR 0x47 CODEBAR POS_BARCODE_TYPE_CODE93 0x48 25
/// POS_BARCODE_TYPE_CODE128 0x49 CODE 128 </param>
/// <param name="nWidthX">
/// 指定条码的基本元素宽度。
/// 2 0.25mm 0.25mm 0.625mm 3 0.375mm 0.375mm 1.0mm 4 0.5mm 0.5mm 1.25mm
/// 5 0.625mm 0.625mm 1.625mm 6 0.75mm 0.75mm 1.875mm
/// </param>
/// <param name="nheight">指定条码的高度点数。可以为 1 到 255 。默认值为162 点。</param>
/// <param name="nHriFontType">
/// 指定 HRI(Human Readable Interpretation)字符的字体类型。可以为以下列表中所列值之一。
/// POS_FONT_TYPE_STANDARD 0x00 标准ASCII POS_FONT_TYPE_COMPRESSED 0x01 压缩ASCII
/// </param>
/// <param name="nHriFontPosition">
/// 指定HRI(Human Readable Interpretation)字符的位置。
/// POS_HRI_POSITION_NONE 0x00 不打印 POS_HRI_POSITION_ABOVE 0x01 只在条码上方打印
/// POS_HRI_POSITION_BELOW 0x02 只在条码下方打印 POS_HRI_POSITION_BOTH 0x03 条码上、下方都打印
/// </param>
/// <param name="nBytesOfInfo">指定由参数 pszInfoBuffer指向的字符串个数,即将要发送给打印机的字符总数。具体值与条码类型有关。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_S_SetBarcode([MarshalAs(UnmanagedType.LPStr)]string pszInfo,
uint nOrgx, uint nType, uint nWidthX, uint nheight,
uint nHriFontType, uint nHriFontPosition, uint nBytesOfInfo);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_SetArea(uint nOrgx, uint nOrgY, uint nWidth, uint nheight, uint nDirection);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_TextOut([MarshalAs(UnmanagedType.LPStr)]string pszString, uint nOrgx, uint nOrgY,
uint nWidthTimes, uint nHeightTimes, uint nFontType, uint nFontStyle);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_PrintBmpInRAM(uint nID, uint nOrgx, uint nOrgY, uint nMode);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_PrintBmpInFlash(uint nID, uint nOrgx, uint nOrgY, uint nMode);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_SetBarcode([MarshalAs(UnmanagedType.LPStr)]string pszInfo,
uint nOrgx, uint nOrgY, uint nType, uint nWidthX, uint nheight,
uint nHriFontType, uint nHriFontPosition, uint nBytesOfInfo);
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_Clear();
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_PL_Print();
/// <summary>
/// 往钱箱引脚发送脉冲以打开钱箱。
/// </summary>
/// <param name="nID">指定钱箱的引脚。0x00 钱箱连接器引脚2 0x01 钱箱连接器引脚5 </param>
/// <param name="nOnTimes">指定往钱箱发送的高电平脉冲保持时间,即 nOnTimes × 2 毫秒。可以为1 到 255。</param>
/// <param name="nOffTimes">指定往钱箱发送的低电平脉冲保持时间,即 nOffTimes × 2 毫秒。可以为1 到 255。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_KickOutDrawer(uint nID, uint nOnTimes, uint nOffTimes);
/// <summary>
/// 新建一个打印作业。
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern bool POS_StartDoc();
/// <summary>
/// 结束一个打印作业。
/// </summary>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern bool POS_EndDoc();
/// <summary>
/// 发送数据到端口或文件。通用端口打印可以使用此函数 一般不能设置字体大小样式等
/// </summary>
/// <param name="hPort">端口或文件句柄。可以通过POS_Open来获取</param>
/// <param name="pszData">指向将要发送的数据缓冲区。</param>
/// <param name="nBytesToWrite">指定将要发送的数据的字节数。</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_WriteFile(IntPtr hPort, byte[] pszData, uint nBytesToWrite);
/// <summary>
/// 从串口,或USB端口或文件读数据到指定的缓冲区。
/// </summary>
/// <param name="hPort">端口或文件句柄。可以通过POS_Open来获取</param>
/// <param name="pszData">指向将要读取的数据缓冲区。</param>
/// <param name="nBytesToRead">数据的字节数</param>
/// <param name="nTimeouts">可能是读取数据的间隔时间</param>
/// <returns></returns>
[DllImport("POSDLL.dll", SetLastError = true)]
public static extern IntPtr POS_ReadFile(IntPtr hPort, byte[] pszData, uint nBytesToRead, uint nTimeouts);
/// <summary>
/// 打开打印设备的串口
/// </summary>
/// <param name="PrintSerialPort">串口对象(需要先初始化并测试参数都有效的情况下,传进来)</param>
/// <returns>是否打开成功</returns>
public bool OpenComPort(ref SerialPort PrintSerialPort)
{
uint i_stopbits = 0;
if (PrintSerialPort.StopBits == StopBits.One)
i_stopbits = POS_COM_ONESTOPBIT;
if (PrintSerialPort.StopBits == StopBits.OnePointFive)
i_stopbits = POS_COM_ONE5STOPBITS;
if (PrintSerialPort.StopBits == StopBits.Two)
i_stopbits = POS_COM_TWOSTOPBITS;
uint i_nComParity = 0;
if (PrintSerialPort.Parity == Parity.None)
i_nComParity = POS_COM_NOPARITY;
if (PrintSerialPort.Parity == Parity.Even)
i_nComParity = POS_COM_EVENPARITY;
if (PrintSerialPort.Parity == Parity.Odd)
i_nComParity = POS_COM_ODDPARITY;
if (PrintSerialPort.Parity == Parity.Space)
i_nComParity = POS_COM_SPACEPARITY;
if (PrintSerialPort.Parity == Parity.Mark)
i_nComParity = POS_COM_MARKPARITY;
uint i_para = 0;
if (PrintSerialPort.Handshake == Handshake.None)
i_para = POS_COM_NO_HANDSHAKE;
if (PrintSerialPort.Handshake == Handshake.RequestToSend)
i_para = POS_COM_DTR_DSR;
if (PrintSerialPort.Handshake == Handshake.RequestToSendXOnXOff)
i_para = POS_COM_RTS_CTS;
if (PrintSerialPort.Handshake == Handshake.XOnXOff)
i_para = POS_COM_XON_XOFF;
POS_IntPtr = POS_Open(PrintSerialPort.PortName,
(uint)PrintSerialPort.BaudRate,
(uint)PrintSerialPort.DataBits,
i_stopbits, i_nComParity, i_para);
if ((int)POS_IntPtr != -1)
return true;
else
return false;
}
/// <summary>
/// 打开打印设备并口
/// </summary>
/// <param name="LPTPortName">并口名称</param>
/// <returns>是否打开成功</returns>
public bool OpenLPTPort(string LPTPortName)
{
POS_IntPtr = POS_Open(LPTPortName, 0, 0, 0, 0, POS_OPEN_PARALLEL_PORT);
if ((int)POS_IntPtr != -1)
return true;
else
return false;
}
/// <summary>
/// 打开打印设备的网口
/// </summary>
/// <param name="IPAddress">设备的IP地址</param>
/// <returns>是否打开成功</returns>
public bool OpenNetPort(string IPAddress)
{
POS_IntPtr = POS_Open(IPAddress, 0, 0, 0, 0, POS_OPEN_NETPORT);
if ((int)POS_IntPtr != -1)
return true;
else
return false;
}
/// <summary>
/// 打开打印设备的USB端口
/// </summary>
/// <param name="USBPortName">“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”</param>
/// <returns>是否打开成功</returns>
public bool OpenUSBPort(string USBPortName)
{
POS_IntPtr = POS_Open(USBPortName, 0, 0, 0, 0, POS_OPEN_BYUSB_PORT);
if ((int)POS_IntPtr != -1)
return true;
else
return false;
}
/// <summary>
/// 使用windows打印驱动程序来驱动OPOS设备
/// </summary>
/// <param name="PrintName">打印驱动程序对应的打印机名称</param>
/// <returns>是否打开成功</returns>
public bool OpenPrinter(string PrintName)
{
POS_IntPtr = POS_Open(PrintName, 0, 0, 0, 0, POS_OPEN_PRINTNAME);
if ((int)POS_IntPtr != -1)
return true;
else
return false;
}
/// <summary>
/// 关闭设备端口
/// </summary>
/// <returns>是否关闭成功</returns>
public bool ClosePrinterPort()
{
IntPtr tmpIntPtr = POS_Close();
return ((uint)tmpIntPtr == POS_SUCCESS);
}
/// <summary>
/// 获取本机默认打印机名称
/// </summary>
public static String DefaultPrinter
{
get
{
return fPrintDocument.PrinterSettings.PrinterName;
}
}
/// <summary>
/// 获取本机的打印机列表。列表中的第一项就是默认打印机。
/// </summary>
public static List<String> GetLocalPrinters()
{
List<String> fPrinters = new List<string>();
fPrinters.Add(DefaultPrinter); // 默认打印机始终出现在列表的第一项
foreach (String fPrinterName in PrinterSettings.InstalledPrinters)
{
if (!fPrinters.Contains(fPrinterName))
fPrinters.Add(fPrinterName);
}
return fPrinters;
}
}
}
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; using System.IO.Ports; using System.Drawing.Printing; namespace ×××××××××××××× { /// <summary> /// 北洋OPOS指令集二次开发包DLL调用 /// /// 备注: /// 因为北洋的demo包里没有C#的,所以参考delphi包的代码转成了C#的. /// 北洋的dll支持市面上所有的 支持ESC/ POS指令的小票打印机的打印(EPSON,佳博,中崎等) /// /// 如果有任何修改请邮件通知本人,欢迎志同道合的朋友共同交流; /// coder: 萧远峰 mail: 71008973@qq.com /// /// POSDLL 动态库的出口函数是用来直接控制 POS 打印机工作的, /// 分为四个部分:通用函数、标准模式打印函数、页模式打印函数、调试等函数。 /// </summary> public class BeiYangOPOS { const string _DllVer = "1.4"; private static PrintDocument fPrintDocument = new PrintDocument(); /// <summary> /// 获取动态库版本号 /// </summary> public string GetDllVer { get { return _DllVer; } } /// <summary> /// 设备打开后的句柄 /// </summary> public IntPtr POS_IntPtr; /// <summary> /// 函数返回值 /// </summary> public uint POS_SUCCESS = 1001;// 函数执行成功 public uint POS_FAIL = 1002; // 函数执行失败 public uint POS_ERROR_INVALID_HANDLE = 1101; // 端口或文件的句柄无效 public uint POS_ERROR_INVALID_PARAMETER = 1102;// 参数无效 public uint POS_ERROR_NOT_BITMAP = 1103; // 不是位图格式的文件 public uint POS_ERROR_NOT_MONO_BITMAP = 1104;// 位图不是单色的 public uint POS_ERROR_BEYONG_AREA = 1105;//位图超出打印机可以处理的大小 public uint POS_ERROR_INVALID_PATH = 1106; // 没有找到指定的文件路径或名 /// <summary> /// 停止位 /// </summary> public uint POS_COM_ONESTOPBIT = 0x00;//停止位为1 public uint POS_COM_ONE5STOPBITS = 0x01;//停止位为1.5 public uint POS_COM_TWOSTOPBITS = 0x02;//停止位为2 /// <summary> /// 奇偶校验 /// </summary> public uint POS_COM_NOPARITY = 0x00;//无校验 public uint POS_COM_ODDPARITY = 0x01;//奇校验 public uint POS_COM_EVENPARITY = 0x02;//偶校验 public uint POS_COM_MARKPARITY = 0x03;//标记校验 public uint POS_COM_SPACEPARITY = 0x04;//空格校验 /// <summary> /// 其他COM口参数及端口类型定义 /// </summary> public uint POS_COM_DTR_DSR = 0x00;// 流控制为DTR/DST public uint POS_COM_RTS_CTS = 0x01;// 流控制为RTS/CTS public uint POS_COM_XON_XOFF = 0x02;// 流控制为XON/OFF public uint POS_COM_NO_HANDSHAKE = 0x03;//无握手 public uint POS_OPEN_PARALLEL_PORT = 0x12;//打开并口通讯端口 public uint POS_OPEN_BYUSB_PORT = 0x13;//打开USB通讯端口 public uint POS_OPEN_PRINTNAME = 0X14;// 打开打印机驱动程序 public uint POS_OPEN_NETPORT = 0x15;// 打开网络接口 public uint POS_CUT_MODE_FULL = 0x00;// 全切 public uint POS_CUT_MODE_PARTIAL = 0x01;// 半切 /// <summary> /// 打开POS机的端口 开始会话 /// </summary> /// <param name="lpName"> ///指向以 null 结尾的打印机名称或端口名称。 ///当参数nParam的值为POS_COM_DTR_DSR、POS_COM_RTS_CTS、POS_COM_XON_XOFF或POS_COM_NO_HANDSHAKE 时, “COM1”,“COM2”,“COM3”,“COM4”等表示串口; ///当参数nParam的值为POS_OPEN_PARALLEL_PORT时,“LPT1”,“LPT2”等表示并口; ///当参数nParam的值为POS_OPEN_BYUSB_PORT时,“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”等表示USB端口。 ///当参数nParam的值为POS_OPEN_PRINTNAME时,表示打开指定的打印机。 ///当参数nParam的值为POS_OPEN_NETPORT时,表示打开指定的网络接口,如“192.168.10.251”表示网络接口IP地址</param> /// <param name="nComBaudrate">串口通信需要的波特率</param> /// <param name="nComDataBits">串口通信需要的数据位</param> /// <param name="nComStopBits">串口通信需要的停止位</param> /// <param name="nComParity">串口通信需要的是否要奇偶校验</param> /// <param name="nParam">指向以 null 结尾的打印机名称或端口名称。 /// 参数nParam的值为POS_COM_DTR_DSR、POS_COM_RTS_CTS、POS_COM_XON_XOFF或POS_COM_NO_HANDSHAKE 时, /// “COM1”,“COM2”,“COM3”,“COM4”等表示串口; /// 当参数nParam的值为POS_OPEN_PARALLEL_PORT时,“LPT1”,“LPT2”等表示并口; /// 当参数nParam的值为POS_OPEN_BYUSB_PORT时,“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”等表示USB端口。 /// 当参数nParam的值为POS_OPEN_PRINTNAME时,表示打开指定的打印机。</param> /// <returns>如果函数调用成功,返回一个已打开的端口句柄。如果函数调用失败,返回值为 INVALID_HANDLE_VALUE (-1)。</returns> [DllImport("POSDLL.dll", CharSet = CharSet.Ansi)] public static extern IntPtr POS_Open([MarshalAs(UnmanagedType.LPStr)]string lpName, uint nComBaudrate, uint nComDataBits, uint nComStopBits, uint nComParity, uint nParam); /// <summary> /// 关闭已经打开的并口或串口,USB端口,网络接口或打印机。 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_Close(); /// <summary> /// 复位打印机,把打印缓冲区中的数据清除,字符和行高的设置被清除,打印模式被恢复到上电时的缺省模式。 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_Reset(); /// <summary> /// 设置打印机的移动单位。 /// </summary> /// <param name="nHorizontalMU">把水平方向上的移动单位设置为 25.4 / nHorizontalMU 毫米。可以为0到255。</param> /// <param name="nVerticalMU">把垂直方向上的移动单位设置为 25.4 / nVerticalMU 毫米。可以为0到255。</param> /// <returns> /// 如果函数成功,则返回值为 POS_SUCCESS。 /// 如果函数失败,则返回值为以下值之一:POS_FAIL POS_ERROR_INVALID_HANDLE POS_ERROR_INVALID_PARAMETER </returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetMotionUnit(uint nHorizontalMU, uint nVerticalMU); /// <summary> /// 选择国际字符集和代码页 /// </summary> /// <param name="nCharSet"> /// 指定国际字符集。不同的国际字符集对0x23到0x7E的ASCII码值对应的符号定义是不同的。 /// 可以为以下列表中所列值之一。 /// 0x00 U.S.A 0x01 France 0x02 Germany 0x03 U.K. 0x04 Denmark I 0x05 Sweden /// 0x06 Italy 0x07 Spain I 0x08 Japan 0x09 Nonway 0x0A Denmark II 0x0B Spain II /// 0x0C Latin America 0x0D Korea </param> /// <param name="nCodePage"> /// 指定字符的代码页。不同的代码页对0x80到0xFF的ASCII码值对应的符号定义是不同的。 /// 0x00 PC437 [U.S.A. Standard Europe 0x01 Reserved 0x02 PC850 [Multilingual] /// 0x03 PC860 [Portuguese] 0x04 PC863 [Canadian-French] 0x05 PC865 [Nordic] /// 0x12 PC852 0x13 PC858 /// </param> /// <returns> /// 如果函数成功,则返回值为 POS_SUCCESS。 /// 如果函数失败,则返回值为以下值之一:POS_FAIL POS_ERROR_INVALID_HANDLE POS_ERROR_INVALID_PARAMETER </returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetCharSetAndCodePage(uint nCharSet, uint nCodePage); /// <summary> /// POS字体样式 /// </summary> /// public uint POS_FONT_TYPE_STANDARD = 0x00;// 标准 ASCII public uint POS_FONT_TYPE_COMPRESSED = 0x01;// 压缩 ASCII public uint POS_FONT_TYPE_UDC = 0x02; // 用户自定义字符 public uint POS_FONT_TYPE_CHINESE = 0x03; // 标准 “宋体” public uint POS_FONT_STYLE_NORMAL = 0x00; // 正常 public uint POS_FONT_STYLE_BOLD = 0x08; // 加粗 public uint POS_FONT_STYLE_THIN_UNDERLINE = 0x80; // 1点粗的下划线 public uint POS_FONT_STYLE_THICK_UNDERLINE = 0x100; // 2点粗的下划线 public uint POS_FONT_STYLE_UPSIDEDOWN = 0x200; // 倒置(只在行首有效) public uint POS_FONT_STYLE_REVERSE = 0x400; // 反显(黑底白字) public uint POS_FONT_STYLE_SMOOTH = 0x800; // 平滑处理(用于放大时) public uint POS_FONT_STYLE_CLOCKWISE_90 = 0x1000; // 每个字符顺时针旋转 90 度 /// <summary> /// 把将要打印的字符串数据发送到打印缓冲区中,并指定X 方向(水平)上的绝对起始点位置, /// 指定每个字符宽度和高度方向上的放大倍数、类型和风格。 /// </summary> /// <param name="pszString">指向以 null 结尾的字符串缓冲区</param> /// <param name="nOrgx">指定 X 方向(水平)的起始点位置离左边界的点数。</param> /// <param name="nWidthTimes">指定字符的宽度方向上的放大倍数。可以为 1到 6。</param> /// <param name="nHeightTimes">指定字符高度方向上的放大倍数。可以为 1 到 6。</param> /// <param name="nFontType">指定字符的字体类型。</param> /// <param name="nFontStyle">指定字符的字体风格。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_S_TextOut([MarshalAs(UnmanagedType.LPStr)]string pszString, uint nOrgx, uint nWidthTimes, uint nHeightTimes, uint nFontType, uint nFontStyle); /// <summary> /// 设置POS的打印模式 (只有两种 页模式和标准模式) /// </summary> /// <param name="nPrintMode"> /// POS_PRINT_MODE_STANDARD 0x00 标准模式(行模式) /// POS_PRINT_MODE_PAGE 0x01 页模式 /// POS_PRINT_MODE_BLACK_MARK_LABEL 0x02 黑标记标签模式 /// POS_PRINT_MODE_WHITE_MARK_LABEL 0x03 白标记标签模式 </param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetMode(uint nPrintMode); /// <summary> /// 设置字符的行高。 /// </summary> /// <param name="nDistance">指定行高点数。可以为 0 到 255。每点的距离与打印头分辨率相关。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetLineSpacing(uint nDistance); /// <summary> /// 设置字符的右间距(相邻两个字符的间隙距离)。 /// </summary> /// <param name="nDistance">指定右间距的点数。可以为 0 到 255。每点的距离与打印头分辨率相关。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetRightSpacing(int nDistance); /// <summary> /// 向前走纸。 /// 1.如果在标准打印模式(行模式)下打印文本,则打印缓冲区中的数据,且打印位置自动移动到下一行的行首。 /// 2.如果在标准打印模式(行模式)下打印位图,则在指定的位置打印位图,且打印位置自动移动到下一行的行首。 /// 3.如果在页模式或标签模式下,则把需要打印的数据设置在指定的位置,同时把打印位置移动到下一个行首, /// 但是并不立即进纸并打印,而是一直到调用 POS_PL_Print 函数时才打印。 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_FeedLine(); /// <summary> /// 打印头换n行 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_FeedLines(uint nLines); /// <summary> /// 切纸 /// </summary> /// <param name="nMode">模式编号 半切或是全切</param> /// <param name="nDistance">走位的距离</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_CutPaper(uint nMode, uint nDistance); /// <summary> /// 设置右边距 /// </summary> /// <param name="nDistance">右边距</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_SetRightSpacing(uint nDistance); /// <summary> /// 预下载一幅位图到打印机的 RAM 中,同时指定此位图的 ID 号。 /// </summary> /// <param name="pszPath">指向以 null 结尾的表示位图路径及其文件名的字符串。</param> /// <param name="nID">指定将要下载的位图的 ID 号。可以为 0 到 7。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PreDownloadBmpToRAM([MarshalAs(UnmanagedType.LPStr)]string pszPath, uint nID); /// <summary> /// 下载并打印位图 /// </summary> /// <param name="pszPath">指向以null 结尾的包含位图文件路径及其名称的字符串。</param> /// <param name="nOrgx">指定将要打印的位图和左边界的距离点数。可以为 0到 65535 点。</param> /// <param name="nMode">指定位图的打印模式。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_S_DownloadAndPrintBmp([MarshalAs(UnmanagedType.LPStr)]string pszPath, uint nOrgx, uint nMode); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_S_PrintBmpInRAM(uint nID, uint nOrgx, uint nMode); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_S_PrintBmpInFlash(uint nID, uint nOrgx, uint nMode); /// <summary> /// 通过串口返回当前打印机的状态。此函数是实时的。 /// </summary> /// <param name="address"></param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_RTQueryStatus(byte[] address); /// <summary> /// 通过串口查询打印机当前的状态。此函数是非实时的。 /// </summary> /// <param name="pszStatus"> /// 指向返回的状态数据的缓冲区,缓冲区大小为 1 个字节。 /// 0,1 0/1 容纸器中有纸 / 纸将用尽 2,3 0/1 打印头处有纸 / 无纸 /// 4,5 0/1 钱箱连接器引脚 3 的电平为低 / 高(表示打开或关闭) /// 6,7 0 保留(固定为0) /// </param> /// <param name="nTimeouts">设置查询状态时大约的超时时间(毫秒)。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_QueryStatus(byte[] pszStatus, int nTimeouts); /// <summary> /// 通过网络接口查询返回当前打印机的状态。 /// </summary> /// <param name="ipAddress">设备IP地址。如“192.168.10.251”。</param> /// <param name="pszStatus"> /// 指向接收返回状态的缓冲区,缓冲区大小为 1 个字节。 /// 0 0/1 钱箱连接器引脚 3 的电平为低/高(表示打开或关闭) /// 1 0/1 打印机联机/脱机 /// 2 0/1 上盖关闭/打开 /// 3 0/1 没有/正在由Feed键按下而进纸 /// 4 0/1 打印机没有/有出错 /// 5 0/1 切刀没有/有出错 /// 6 0/1 有纸/纸将尽(纸将尽传感器探测) /// 7 0/1 有纸/纸用尽(纸传感器探测) /// </param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern int POS_NETQueryStatus([MarshalAs(UnmanagedType.LPStr)]string ipAddress, out Byte pszStatus); /// <summary> /// 设置并打印条码。 /// </summary> /// <param name="pszInfo">指向以 null 结尾的字符串。每个字符允许的范围和格式与具体条码类型有关。</param> /// <param name="nOrgx">指定将要打印的条码的水平起始点与左边界的距离点数。可以为 0 到65535。</param> /// <param name="nType"> /// 指定条码的类型。可以为以下列表中所列值之一。 /// POS_BARCODE_TYPE_UPC_A 0x41 UPC-A POS_BARCODE_TYPE_UPC_E 0x42 UPC-C /// POS_BARCODE_TYPE_JAN13 0x43 JAN13(EAN13) POS_BARCODE_TYPE_JAN8 0x44 JAN8(EAN8) /// POS_BARCODE_TYPE_CODE39 0x45 CODE39 POS_BARCODE_TYPE_ITF 0x46 INTERLEAVED 2 OF 5 /// POS_BARCODE_TYPE_CODEBAR 0x47 CODEBAR POS_BARCODE_TYPE_CODE93 0x48 25 /// POS_BARCODE_TYPE_CODE128 0x49 CODE 128 </param> /// <param name="nWidthX"> /// 指定条码的基本元素宽度。 /// 2 0.25mm 0.25mm 0.625mm 3 0.375mm 0.375mm 1.0mm 4 0.5mm 0.5mm 1.25mm /// 5 0.625mm 0.625mm 1.625mm 6 0.75mm 0.75mm 1.875mm /// </param> /// <param name="nheight">指定条码的高度点数。可以为 1 到 255 。默认值为162 点。</param> /// <param name="nHriFontType"> /// 指定 HRI(Human Readable Interpretation)字符的字体类型。可以为以下列表中所列值之一。 /// POS_FONT_TYPE_STANDARD 0x00 标准ASCII POS_FONT_TYPE_COMPRESSED 0x01 压缩ASCII /// </param> /// <param name="nHriFontPosition"> /// 指定HRI(Human Readable Interpretation)字符的位置。 /// POS_HRI_POSITION_NONE 0x00 不打印 POS_HRI_POSITION_ABOVE 0x01 只在条码上方打印 /// POS_HRI_POSITION_BELOW 0x02 只在条码下方打印 POS_HRI_POSITION_BOTH 0x03 条码上、下方都打印 /// </param> /// <param name="nBytesOfInfo">指定由参数 pszInfoBuffer指向的字符串个数,即将要发送给打印机的字符总数。具体值与条码类型有关。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_S_SetBarcode([MarshalAs(UnmanagedType.LPStr)]string pszInfo, uint nOrgx, uint nType, uint nWidthX, uint nheight, uint nHriFontType, uint nHriFontPosition, uint nBytesOfInfo); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_SetArea(uint nOrgx, uint nOrgY, uint nWidth, uint nheight, uint nDirection); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_TextOut([MarshalAs(UnmanagedType.LPStr)]string pszString, uint nOrgx, uint nOrgY, uint nWidthTimes, uint nHeightTimes, uint nFontType, uint nFontStyle); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_PrintBmpInRAM(uint nID, uint nOrgx, uint nOrgY, uint nMode); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_PrintBmpInFlash(uint nID, uint nOrgx, uint nOrgY, uint nMode); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_SetBarcode([MarshalAs(UnmanagedType.LPStr)]string pszInfo, uint nOrgx, uint nOrgY, uint nType, uint nWidthX, uint nheight, uint nHriFontType, uint nHriFontPosition, uint nBytesOfInfo); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_Clear(); [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_PL_Print(); /// <summary> /// 往钱箱引脚发送脉冲以打开钱箱。 /// </summary> /// <param name="nID">指定钱箱的引脚。0x00 钱箱连接器引脚2 0x01 钱箱连接器引脚5 </param> /// <param name="nOnTimes">指定往钱箱发送的高电平脉冲保持时间,即 nOnTimes × 2 毫秒。可以为1 到 255。</param> /// <param name="nOffTimes">指定往钱箱发送的低电平脉冲保持时间,即 nOffTimes × 2 毫秒。可以为1 到 255。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_KickOutDrawer(uint nID, uint nOnTimes, uint nOffTimes); /// <summary> /// 新建一个打印作业。 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern bool POS_StartDoc(); /// <summary> /// 结束一个打印作业。 /// </summary> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern bool POS_EndDoc(); /// <summary> /// 发送数据到端口或文件。通用端口打印可以使用此函数 一般不能设置字体大小样式等 /// </summary> /// <param name="hPort">端口或文件句柄。可以通过POS_Open来获取</param> /// <param name="pszData">指向将要发送的数据缓冲区。</param> /// <param name="nBytesToWrite">指定将要发送的数据的字节数。</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_WriteFile(IntPtr hPort, byte[] pszData, uint nBytesToWrite); /// <summary> /// 从串口,或USB端口或文件读数据到指定的缓冲区。 /// </summary> /// <param name="hPort">端口或文件句柄。可以通过POS_Open来获取</param> /// <param name="pszData">指向将要读取的数据缓冲区。</param> /// <param name="nBytesToRead">数据的字节数</param> /// <param name="nTimeouts">可能是读取数据的间隔时间</param> /// <returns></returns> [DllImport("POSDLL.dll", SetLastError = true)] public static extern IntPtr POS_ReadFile(IntPtr hPort, byte[] pszData, uint nBytesToRead, uint nTimeouts); /// <summary> /// 打开打印设备的串口 /// </summary> /// <param name="PrintSerialPort">串口对象(需要先初始化并测试参数都有效的情况下,传进来)</param> /// <returns>是否打开成功</returns> public bool OpenComPort(ref SerialPort PrintSerialPort) { uint i_stopbits = 0; if (PrintSerialPort.StopBits == StopBits.One) i_stopbits = POS_COM_ONESTOPBIT; if (PrintSerialPort.StopBits == StopBits.OnePointFive) i_stopbits = POS_COM_ONE5STOPBITS; if (PrintSerialPort.StopBits == StopBits.Two) i_stopbits = POS_COM_TWOSTOPBITS; uint i_nComParity = 0; if (PrintSerialPort.Parity == Parity.None) i_nComParity = POS_COM_NOPARITY; if (PrintSerialPort.Parity == Parity.Even) i_nComParity = POS_COM_EVENPARITY; if (PrintSerialPort.Parity == Parity.Odd) i_nComParity = POS_COM_ODDPARITY; if (PrintSerialPort.Parity == Parity.Space) i_nComParity = POS_COM_SPACEPARITY; if (PrintSerialPort.Parity == Parity.Mark) i_nComParity = POS_COM_MARKPARITY; uint i_para = 0; if (PrintSerialPort.Handshake == Handshake.None) i_para = POS_COM_NO_HANDSHAKE; if (PrintSerialPort.Handshake == Handshake.RequestToSend) i_para = POS_COM_DTR_DSR; if (PrintSerialPort.Handshake == Handshake.RequestToSendXOnXOff) i_para = POS_COM_RTS_CTS; if (PrintSerialPort.Handshake == Handshake.XOnXOff) i_para = POS_COM_XON_XOFF; POS_IntPtr = POS_Open(PrintSerialPort.PortName, (uint)PrintSerialPort.BaudRate, (uint)PrintSerialPort.DataBits, i_stopbits, i_nComParity, i_para); if ((int)POS_IntPtr != -1) return true; else return false; } /// <summary> /// 打开打印设备并口 /// </summary> /// <param name="LPTPortName">并口名称</param> /// <returns>是否打开成功</returns> public bool OpenLPTPort(string LPTPortName) { POS_IntPtr = POS_Open(LPTPortName, 0, 0, 0, 0, POS_OPEN_PARALLEL_PORT); if ((int)POS_IntPtr != -1) return true; else return false; } /// <summary> /// 打开打印设备的网口 /// </summary> /// <param name="IPAddress">设备的IP地址</param> /// <returns>是否打开成功</returns> public bool OpenNetPort(string IPAddress) { POS_IntPtr = POS_Open(IPAddress, 0, 0, 0, 0, POS_OPEN_NETPORT); if ((int)POS_IntPtr != -1) return true; else return false; } /// <summary> /// 打开打印设备的USB端口 /// </summary> /// <param name="USBPortName">“BYUSB-0”、“BYUSB-1”、“BYUSB-2”、“BYUSB-3”</param> /// <returns>是否打开成功</returns> public bool OpenUSBPort(string USBPortName) { POS_IntPtr = POS_Open(USBPortName, 0, 0, 0, 0, POS_OPEN_BYUSB_PORT); if ((int)POS_IntPtr != -1) return true; else return false; } /// <summary> /// 使用windows打印驱动程序来驱动OPOS设备 /// </summary> /// <param name="PrintName">打印驱动程序对应的打印机名称</param> /// <returns>是否打开成功</returns> public bool OpenPrinter(string PrintName) { POS_IntPtr = POS_Open(PrintName, 0, 0, 0, 0, POS_OPEN_PRINTNAME); if ((int)POS_IntPtr != -1) return true; else return false; } /// <summary> /// 关闭设备端口 /// </summary> /// <returns>是否关闭成功</returns> public bool ClosePrinterPort() { IntPtr tmpIntPtr = POS_Close(); return ((uint)tmpIntPtr == POS_SUCCESS); } /// <summary> /// 获取本机默认打印机名称 /// </summary> public static String DefaultPrinter { get { return fPrintDocument.PrinterSettings.PrinterName; } } /// <summary> /// 获取本机的打印机列表。列表中的第一项就是默认打印机。 /// </summary> public static List<String> GetLocalPrinters() { List<String> fPrinters = new List<string>(); fPrinters.Add(DefaultPrinter); // 默认打印机始终出现在列表的第一项 foreach (String fPrinterName in PrinterSettings.InstalledPrinters) { if (!fPrinters.Contains(fPrinterName)) fPrinters.Add(fPrinterName); } return fPrinters; } } }
所引用的dll文件
这是年初写的一个打开钱箱的工具,北洋的网上有现成的代码,现在只写了其它的,网络端口的需要重新配置,串口的是用发命令的方式打开的。
不是支持所有钱箱,请大家合理利用,需要对开启WMI服务,一般都开启的,不需要管。
一般超市使用时,都是讲钱箱与热敏打印机的RJ11口相连接,当打印时,会弹出钱箱,这种情况只要对打印机进行设置就可以实现钱箱的弹出。
当有需求,钱箱和打印不是同步操作时,就需要使用代码控制钱箱的弹出,这种情况下钱箱是直接连接在电脑上。
使用CASH DRAWER TRIGGER WITH USB INTERFACE连接到电脑的USB口就模拟了一个COM口,此时可以在设备管理器中看见
COM7就是USB转换后的串口号,记住它
弹出钱箱其实很简单,只需打个对应的串口,并向它写入数据就可以了,代码如下:
- string send = "" + (char)(27) + (char)(112) + (char)(0) + (char)(60) + (char)(255);
- System.IO.Ports.SerialPort com = new System.IO.Ports.SerialPort("COM7");
- com.Open();
- com.WriteLine(send);
- com.Close();
钱箱是不是弹出来了,就这么简单。