华为路由器ar2240今天升级之后是成功的,我重启一下ok。之后为了确保,我再重启一下,发现之前连接网线的那个GE1(代号g0/0/1)一直不亮了,物理状态down。进入设备重启接口也不行。是因为combo口模式协商问题,可以强制电口看看!
[ZD-AR2240]dis int g0/0/1
GigabitEthernet0/0/1 current state : DOWN
Line protocol current state : DOWN
Description:HUAWEI, AR Series, GigabitEthernet0/0/1 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 10.30.0.2/28
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4482-e5b9-d1c4
Last physical up time : -
Last physical down time : 2018-07-11 17:06:02
Current system time: 2018-07-11 17:14:03
Port Mode: AUTO
Speed : 1000, Loopback: NONE
Duplex: FULL, Negotiation: ENABLE
Mdi : AUTO, Clock : -
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input peak rate 0 bits/se