RIP与静态路由的重分布配置
如上例图所示：“RIP与OSPF路由重分布例子”
switchA(config)#router rip
switchA(config-router)#network 192.168.10.0
switchA(config-router)#network 192.168.20.0
switchA(config-router)#network 192.168.1.0
switchA(config-router)#version 2
switchA(config-router)#no auto-summary
switchA(config-router)#exit
Router(config)#router rip
Router(config-router)#network 192.168.1.0
Router(config-router)#network 192.168.2.0
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#exit
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.2.1
Router(config)#end
switchB(config)#ip route 192.168.10.0 255.255.255.0 192.168.2.2
switchB(config)#ip route 192.168.20.0 255.255.255.0 192.168.2.2
switchB(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.2
switchB(config)#end
在互连路由器上进行重分布配置，使其两个不同路由协议的网络进行互通
Router(config)#router rip
Router(config-router)#redistribute static//将RIP重分布到静态路由当中
Router(config-router)#exit
Router(config)#end
此例我只是做了把RIP重分布到静态路由，是因为静态路由本身就是一个明确的邻接路由，因为我们在switchB上已经明确指定静态路由了，所以就没有做相关的重分布配置，话说过来，网络设备也没有提供相就的静态路由重分布的方法。
配置好后：三台设备的路由表情况如下：
Router:
Router#show ip route
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

 

Codes:  C - connected, S - static,  R - RIP B - BGP
        O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

 

        * - candidate default

 

Gateway of last resort is no set
C    192.168.1.0/24 is directly connected, FastEthernet 0/0
C    192.168.1.2/32 is local host.
C    192.168.2.0/24 is directly connected, FastEthernet 0/1
C    192.168.2.2/32 is local host.
R    192.168.10.0/24 [120/1] via 192.168.1.1, 00:00:15, FastEthernet 0/0
R    192.168.20.0/24 [120/1] via 192.168.1.1, 00:00:15, FastEthernet 0/0
S    192.168.30.0/24 [1/0] via 192.168.2.1
S    192.168.40.0/24 [1/0] via 192.168.2.1
switchA:
switchA#show ip route

 

Codes:  C - connected, S - static,  R - RIP B - BGP
        O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

 

        * - candidate default

 

Gateway of last resort is no set
C    192.168.1.0/24 is directly connected, FastEthernet 0/1
C    192.168.1.1/32 is local host.
C    192.168.10.0/24 is directly connected, VLAN 10
C    192.168.10.1/32 is local host.
C    192.168.20.0/24 is directly connected, VLAN 20
C    192.168.20.1/32 is local host.
R    192.168.30.0/24 [120/1] via 192.168.1.2, 00:00:15, FastEthernet 0/0
R    192.168.40.0/24 [120/1] via 192.168.1.2, 00:00:15, FastEthernet 0/0
R    192.168.2.0/24 [120/1] via 192.168.1.2, 00:00:15, FastEthernet 0/0

 

switchB:
switchB#show ip route

 

Codes:  C - connected, S - static,  R - RIP B - BGP
        O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

 

        * - candidate default

 

Gateway of last resort is no set
C    192.168.2.0/24 is directly connected, FastEthernet 0/1
C    192.168.2.1/32 is local host.
S    192.168.10.0/24 [1/0] via 192.168.2.2
S    192.168.20.0/24 [1/0] via 192.168.2.2
S    192.168.1.0/24 [1/0] via 192.168.2.2
C    192.168.40.0/24 is directly connected, VLAN 20
C    192.168.40.1/32 is local host.
根据上述的路由表的分析我们得知rip与static的路由重分布成功。