Username:admin
Password:
< H3C>dis cu
#
version 5.20, Release 2313
#
sysname H3C
#
domain default enable system
#
dns proxy enable
#
telnet server enable
#
dar p2p signature-file flash:/p2p_default.mtd
#
port-security enable
#
password-recovery enable
#
acl number 2010
#
acl number 3000
rule 0 permit ip source 192.168.180.0 0.0.0.255 destination 192.168.199.0 0.0.0.255
acl number 3010
rule 0 deny ip source 192.168.180.0 0.0.0.255 destination 192.168.199.0 0.0.0.255[310是通过命令行建立的，这里的意思是不是指规则0拒绝源IP访问目的IP?]
rule 5 permit ip
#               
vlan 1         
#               
domain system   
access-limit disable
state active   
idle-cut disable
self-service-url disable
#               
ike proposal 1  
encryption-algorithm 3des-cbc
dh group2      
sa duration 28800
#               
ike peer xtdtozb
proposal 1     
pre-shared-key cipher $c$3$vWGBU5xCzUKd5l++NnV0uWFE6EqlQANCczA5GyU=
remote-address 210.10.200.210  [为保密，修改过]
local-address 210.10.200.230   [为保密，修改过]
#               
ipsec transform-set xtdtozb
encapsulation-mode tunnel
transform esp  
esp authentication-algorithm sha1
esp encryption-algorithm 3des
#               
ipsec policy 1048576 1 isakmp
connection-name xtdtozb
security acl 3000
pfs dh-group2  
ike-peer xtdtozb
transform-set xtdtozb
sa duration traffic-based 1843200
sa duration time-based 28800
#               
dhcp server ip-pool vlan1 extended
#               
user-group system
group-attribute allow-guest
#               
local-user admin
password cipher $c$3$LhwixC6Vs/KHKJ8XH6gRh1VPGaT2LUBOeqJ7lnQD
authorization-attribute level 3
service-type telnet
service-type web
#               
cwmp            
undo cwmp enable
#               
interface Aux0  
async mode flow
link-protocol ppp
#               
interface Cellular0/0
async mode protocol
link-protocol ppp
#               
interface NULL0
#               
interface Vlan-interface1
ip address 192.168.180.253 255.255.255.0
undo dhcp select server global-pool
dhcp server apply ip-pool vlan1
ipsec no-nat-process enable
#               
interface GigabitEthernet0/0
port link-mode route
nat outbound 3010
ip address 210.10.200.230   [为保密，修改过] 255.255.255.128
ipsec no-nat-process enable
ipsec policy 1048576
dns server 202.96.128.86
dns server 202.96.128.128
#               
interface GigabitEthernet0/1
port link-mode bridge
#               
interface GigabitEthernet0/2
port link-mode bridge
#               
interface GigabitEthernet0/3
port link-mode bridge
#               
interface GigabitEthernet0/4
port link-mode bridge
#               
ip route-static 0.0.0.0 0.0.0.0 GigabitEthernet0/0 210.10.200.110   [为保密，修改过]
#               
nms primary monitor-interface GigabitEthernet0/0
#               
load xml-configuration
#               
load tr069-configuration
#               
user-interface tty 12
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
#               
return         
< H3C>
< H3C>dis ike da
             ^
% Unrecognized command found at '^' position.
< H3C>dis ike sa
    total phase-1 SAs:  1
    connection-id  peer                    flag        phase   doi
  ----------------------------------------------------------------
     488           210.10.200.210          RD          1       IPSEC
     717           210.10.200.210          RD          2       IPSEC

  flag meaning
  RD--READY ST--STAYALIVE RL--REPLACED FD--FADING TO--TIMEOUT RK--REKEY
< H3C>dis ipsec sa
===============================
Interface: GigabitEthernet0/0
    path MTU: 1500
===============================

  -----------------------------
  IPsec policy name: "1048576"
  sequence number: 1
  acl version: ACL4
  mode: isakmp
  -----------------------------
    PFS: Y,  DH group: 2
    tunnel:
        local  address: 210.10.200.210  [为保密，修改过]
        remote address: 210.10.200.230   [为保密，修改过]
    flow:
        sour addr: 192.168.180.0/255.255.255.0  port: 0  protocol: IP
        dest addr: 192.168.199.0/255.255.255.0  port: 0  protocol: IP

    [inbound ESP SAs]
      spi: 0xB56E74AA(3043914922)
      transform: ESP-ENCRYPT-3DES ESP-AUTH-SHA1
      in use setting: Tunnel
      connection id: 5
      sa duration (kilobytes/sec): 1843200/28800
      sa remaining duration (kilobytes/sec): 1843182/20441
      anti-replay detection: Enabled
        anti-replay window size(counter based): 32
      udp encapsulation used for nat traversal: N
               
    [outbound ESP SAs]
      spi: 0x7E10BFD(132189181)
      transform: ESP-ENCRYPT-3DES ESP-AUTH-SHA1
      in use setting: Tunnel
      connection id: 6
      sa duration (kilobytes/sec): 1843200/28800
      sa remaining duration (kilobytes/sec): 1843192/20441
      anti-replay detection: Enabled
        anti-replay window size(counter based): 32
      udp encapsulation used for nat traversal: N
< H3C>