1.确认外部设备都打开以后，打开系统电源
Service Processor Firmware
Version: 3R080425
Copyright 2001, IBM Corporation
657903C
________________________________
MAIN MENU
1. Service Processor Setup Menu
2. System Power Control Menu
3. System Information Menu
4. Language Selection Menu
5. Call-In/Call-Out Setup Menu
6. Set System Name
99. Exit from Menus
0> 2 #进入电源控制菜单
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Fast Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
0> 4 #此处选择4，Power-On,系统上电
WARNING: POWERING SYSTEM WILL EXIT MENUS!
Enter "Y" to continue, any other key to abort.
0> y
Please wait....
2.上电以后bios自检
System Powering On. Exiting menus.
9101
9022
90FD
9102
....
9116
911F
9117
3.自检通过后按1进入SMS(类似pc上的bios设置界面)
1 = SMS Menu 5 = Default Boot List
6 = Stored Boot List 8 = Open Firmware Prompt
memory keyboard network scsi speaker
4.SMS菜单，此处选择7设置启动顺序
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Change Password Options
3. View Error Log
4. Setup Remote IPL (Initial Program Load)
5. Change SCSI Settings
6. Select Console
7. Select Boot Options
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:7
5.选择安装引导启动设备
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
1. Select Install or Boot Device #此次安装引导
2. Configure Boot Device Order #设置系统引导顺序
3. Multiboot Startup <OFF> #多重引导
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
6.选择启动设备（类似PC的启动顺序）
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Device Type 选择安装方式
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:3
7.选择设备接口类型
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Media Type 选择接口类型
1. SCSI
2. SSA
3. SAN
4. IDE
5. ISA
6. List All Devices #列出所有类型
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:4
8.选择设备
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Device
Device Current Device
Number Position Name
1. 2 IDE CD-ROM
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
9.选择引导模式，并退出SMS菜单重新引导
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Task
IDE CD-ROM
1. Information
2. Normal Mode Boot #正常模式引导
3. Service Mode Boot #维护模式
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:2
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Are you sure you want to exit System Management Services? #是否退出SMS菜单
1. Yes
2. No
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
10.等待引导
Elapsed time since release of system processors: 5 mins 17 secs
-------------------------------------------------------------------------------
Welcome to AIX.
boot p_w_picpath timestamp: 17:48 10/27
The current time and date: 11:37:59 07/28/2012
processor count: 2; memory size: 4096MB; kernel size: 25705922
boot device: /pci@400000000110/ide@3,1/disk@0:\ppc\chrp\bootfile.exe
kernel debugger setting: enabled
-------------------------------------------------------------------------------
AIX Version 6.1
Starting NODE#000 physical CPU#001 as logical CPU#001... done.
Preserving 22406 bytes of symbol table [/usr/lib/drivers/scdisk]
Preserving 33009 bytes of symbol table [/etc/drivers/scdiskpin]
Preserving 10745 bytes of symbol table [/usr/lib/drivers/tape]
Preserving 5915 bytes of symbol table [/etc/drivers/tapepin]
Preserving 153927 bytes of symbol table [/usr/lib/drivers/hd_pin]
Preserving 255489 bytes of symbol table [/usr/lib/drivers/hd_pin_bot]
Preserving 10745 bytes of symbol table [/usr/lib/drivers/tape]
Preserving 5915 bytes of symbol table [/etc/drivers/tapepin]
11.选择控制台
******* Please define the System Console. *******
##此处按 "1" "enter键"进入控制台
Type a 1 and press Enter to use this terminal as the
system console.
Pour definir ce terminal comme console systeme, appuyez
sur 1 puis sur Entree.
Taste 1 und anschliessend die Eingabetaste druecken, um
diese Datenstation als Systemkonsole zu verwenden.
Premere il tasto 1 ed Invio per usare questo terminal
come console.
Escriba 1 y pulse Intro para utilizar esta terminal como
consola del sistema.
Escriviu 1 1 i premeu Intro per utilitzar aquest
terminal com a consola del sistema.
Digite um 1 e pressione Enter para utilizar este terminal
como console do sistema.
HARDWARE SYSTEM MICROCODE
Licensed Internal Code - Property of IBM
(C) Copyright IBM Corp. 1990, 1994.
All rights reserved.
US Government Users Restricted Rights -
Use, duplication or disclosure restricted
by GSA ADP Schedule Contract with IBM Corp.
12.选择语言，默认英语
>>> 1 Type 1 and press Enter to have English during install.
2 Entreu 2 i premeu Intro per veure la instal·lació en català.
3 Entrez 3 pour effectuer l'installation en fran?ais.
4 Für Installation in deutscher Sprache 4 eingeben
und die Eingabetaste drücken.
5 Immettere 5 e premere Invio per l'installazione in Italiano.
6 Digite 6 e pressione Enter para usar Português na instala??o.
7 Escriba 7 y pulse Intro para la instalación en espa?ol.
88 Help ?
>>> Choice [1]: 1
13.选择安装
Welcome to Base Operating System
Installation and Maintenance
Type the number of your choice and press Enter. Choice is indicated by >>>.
>>> 1 Start Install Now with Default Settings #按照默认配置安装
2 Change/Show Installation Settings and Install #更改显示安装配置
3 Start Maintenance Mode for System Recovery #进入维护模式（可用于解决root密码丢失问题）
4 Configure Network Disks (iSCSI)
5 Select Storage Adapters
88 Help ?
99 Previous Menu
>>> Choice [1]: 2
14.显示安装配置
Installation and Settings
Either type 0 and press Enter to install with current settings, or type the
number of the setting you want to change and press Enter.
1 System Settings:
Method of Installation.............Preservation #此处为安装方式,默认保留安装
Disk Where You Want to Install.....hdisk0 #此处为安装位置
2 Primary Language Environment Settings (AFTER Install):
Cultural Convention................English (United States) #风俗习惯
Language ..........................English (United States) #语言
Keyboard ..........................English (United States) #键盘
Keyboard Type......................Default #键盘类型
3 Security Model.......................Default #安全类型，TCB包
4 More Options (Software install options) #更多选项
>>> 0 Install with the current settings listed above.
+-----------------------------------------------------
88 Help ? | WARNING: Base Operating System Installation will
99 Previous Menu | destroy or impair recovery of SOME data on the
| destination disk hdisk0.
>>> Choice [0]: 1
15.选择安装方式
Change Method of Installation
Type the number of the installation method and press Enter.
1 New and Complete Overwrite #完全覆盖安装
Overwrites EVERYTHING on the disk selected for installation.
Warning: Only use this method if the disk is totally empty or if there
is nothing on the disk you want to preserve.
>>> 2 Preservation Install #保留安装，默认覆盖usr、tmp、var、/文件系统
Preserves SOME of the existing data on the disk selected for
installation. Warning: This method overwrites the usr (/usr),
variable (/var), temporary (/tmp), and root (/) file systems. Other
product (applications) files and configuration data will be destroyed.
3 Migration Install #迁移安装
Upgrades the Base Operating System to the current release.
Other product (applications) files and configuration data are saved.
88 Help ?
99 Previous Menu
>>> Choice [2]: 1
16.选择安装位置
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for installation and press
Enter. To cancel a choice, type the corresponding number and Press Enter.
At least one bootable disk must be selected. The current choice is indicated
by >>>.
Name Location Code Size(MB) VG Status Bootable
>>> 1 hdisk0 1S-08-00-10,0 70007 rootvg Yes No
2 hdisk1 1S-08-00-11,0 70007 rootvg Yes No
>>> 0 Continue with choices indicated above
55 More Disk Options
66 Devices not known to Base Operating System Installation
77 Display More Disk Information
88 Help ?
99 Previous Menu
>>> Choice [0]: 2
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for installation and press
Enter. To cancel a choice, type the corresponding number and Press Enter.
At least one bootable disk must be selected. The current choice is indicated
by >>>.
Name Location Code Size(MB) VG Status Bootable
>>> 1 hdisk0 1S-08-00-10,0 70007 rootvg Yes No
>>> 2 hdisk1 1S-08-00-11,0 70007 rootvg Yes No
>>> 0 Continue with choices indicated above
55 More Disk Options
66 Devices not known to Base Operating System Installation
77 Display More Disk Information
88 Help ?
99 Previous Menu
>>> Choice [0]: 1 #再次选择取消
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for installation and press
Enter. To cancel a choice, type the corresponding number and Press Enter.
At least one bootable disk must be selected. The current choice is indicated
by >>>.
Name Location Code Size(MB) VG Status Bootable
1 hdisk0 1S-08-00-10,0 70007 rootvg Yes No
>>> 2 hdisk1 1S-08-00-11,0 70007 rootvg Yes No
>>> 0 Continue with choices indicated above
55 More Disk Options
66 Devices not known to Base Operating System Installation
77 Display More Disk Information
88 Help ?
99 Previous Menu
>>> Choice [0]: 0 #继续安装
17.确认配置
Installation and Settings
Either type 0 and press Enter to install with current settings, or type the
number of the setting you want to change and press Enter.
1 System Settings:
Method of Installation.............New and Complete Overwrite
Disk Where You Want to Install.....hdisk1
2 Primary Language Environment Settings (AFTER Install):
Cultural Convention................English (United States)
Language ..........................English (United States)
Keyboard ..........................English (United States)
Keyboard Type......................Default
3 Security Model.......................Default
4 More Options (Software install options)
>>> 0 Install with the current settings listed above.
+-----------------------------------------------------
88 Help ? | WARNING: Base Operating System Installation will
99 Previous Menu | destroy or impair recovery of ALL data on the
| destination disk hdisk1.
>>> Choice [0]: 0 #开始安装
18.安装后的设置
Installation Assistant
Move cursor to desired item and press Enter.
Set Date and Time #设置时间
Set root Password #设置root密码
Configure Network Communications #设置网络
Install Software Applications
Using SMIT (information only)
F1=Help F2=Refresh F3=Cancel Esc+8=Image
Esc+9=Shell Esc+0=Exit Enter=Do
Set Date and Time #设置时间
Move cursor to desired item and press Enter.
Change / Show Date & Time #显示更改时间
Change Time Zone Using System Defined Values #更改时区
Change Time Zone Using User Inputted Values
F1=Help F2=Refresh F3=Cancel Esc+8=Image
Esc+9=Shell Esc+0=Exit Enter=Do
Configure Network Communications #设置网络
Move cursor to desired item and press Enter.
TCP/IP Startup
Add a Hostname to Access Other Systems
Start NFS
Mount a Remote File System
Further Configuration
Use DHCP for TCPIP Configuration & Startup
F1=Help F2=Refresh F3=Cancel Esc+8=Image
Esc+9=Shell Esc+0=Exit Enter=Do
转载于:https://blog.51cto.com/woshiggd/1147444
564
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
