配置浮动路由

1，实验名称：配置浮动路由
2，实验目的：PC1和PC2互通
3，实验拓扑：

4，实验步骤：
<Huawei>undo terminal monitor
<Huawei>system-view
[Huawei]sysname R1
[R1]interface gi0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 255.255.255.0
[R1-GigabitEthernet0/0/0]undo shutdown
[R1-GigabitEthernet0/0/0]interface gi0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.2.1 255.255.255.0
[R1-GigabitEthernet0/0/1]undo shutdown
[R1-GigabitEthernet0/0/1]interface gi0/0/2
[R1-GigabitEthernet0/0/2]ip add 192.168.3.1 255.255.255.0
[R1-GigabitEthernet0/0/2]undo shutdown
[R1-GigabitEthernet0/0/2]q
[R1]ip route-static 192.168.4.0 255.255.255.0 192.168.2.2 preference 80 （值越小越好）
[R1]ip route-static 192.168.4.0 255.255.255.0 192.168.3.2 preference 90（值越小越好）
[R1]
R2
<Huawei>UNDO terminal monitor
<Huawei>system-view
[Huawei]sysname R2
[R2]interface gi0/0/1
[R2-GigabitEthernet0/0/1]ip add 192.168.2.2 255.255.255.0
[R2-GigabitEthernet0/0/1]undo shutdown
[R2-GigabitEthernet0/0/1]interface gi0/0/2
[R2-GigabitEthernet0/0/2]ip add 192.168.3.2 255.255.255.0
[R2-GigabitEthernet0/0/2]undo shutdown
[R2-GigabitEthernet0/0/2]interface gi0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.4.254 255.255.255.0
[R2-GigabitEthernet0/0/0]undo shutdown
[R2-GigabitEthernet0/0/0]q
[R2]ip route-static 192.168.1.0 255.255.255.0 192.168.2.1 preference 80
[R2]ip route-static 192.168.1.0 255.255.255.0 192.168.3.1 preference 90

5，验证及测试：

6，总结：
配置思路：
（1）配置PC机IP地址
（2）配置路由器R1和R2的IP地址
（3）配置下一跳和链路冗余
（4）验证

转载于:https://blog.51cto.com/13560878/2063187