[RHEL] 配置 LVM 卷
一、Introduction
基础预览 :LVM 认知与扩容操作
高端实战:Linux系统如何迁移至LVM磁盘
之前转过一篇文章 LVM分区在线扩容 ,其原因是我需要给公司的 LVM 卷进行一个扩展卷的扩大。
那其实,不仅只有扩大。还有:缩小以及修复。
二、Environment
[root@server0 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vda 253:0 0 10G 0 disk
└─vda1 253:1 0 10G 0 part /
vdb 253:16 0 10G 0 disk
└─vdb1 253:17 0 512M 0 part
└─finance-loans 252:0 0 256M 0 lvm /finance/loans
注释:可以看到系统内已经有了一个 LVM 卷了,但系统还有剩余空间(9.5G)还未被使用。
Firest:Format File System
...
Command (m for help): p
Disk /dev/vdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0009f6d4
Device Boot Start End Blocks Id System
/dev/vdb1 2048 1050623 524288 8e Linux LVM
提示: 上述具体 Command 解释,位于文章底部有附录—— Command_action
注意: the next reboot or after you run partprobe(8) or kpartx(8)
Second:Create Physical Volume
[root@server0 ~]# pvcreate /dev/vdb2
Third: Create Volume Group
[root@server0 ~]# vgcreate vg /dev/vdb2
Volume group "vg" successfully created
BTW: " -s" 可定义 PEnum 块大小;
Finished:Make Volume Group join LVM
[root@server0 ~]# lvcreate -n lvm vg -L 100M
Logical volume "lvm" created
BTW: "-l" 可定义 PEnum 数量
注意: " -L " 可使用 +size|-size|size(means equal)
三、Expand Space
1、单盘扩大
[root@server0 ~]# lvextend -L +100M /dev/vg/lvm --resizefs
fsck from util-linux 2.23.2
/dev/mapper/vg-lvm: clean, 11/25688 files, 8896/102400 blocks
Extending logical volume lvm to 200.00 MiB
Logical volume lvm successfully resized
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/mapper/vg-lvm to 204800 (1k) blocks.
The filesystem on /dev/mapper/vg-lvm is now 204800 blocks long.
注意:我这里偷了一个懒把俩条命令结合在一起了,否则 lvs /path/to/lvm
空间大小是不会立即生效的。
Q1:fsadm: Cannot get FSTYPE of "/dev/vg/lvm" Filesystem check failed.
A1:please format Filesystem promptly.
Q2:Forgot to add option "--resizefs"
A2:redo or ext2/ext3/ext4 filesystem to execute resizefs /path/to/lvm
, but xfs filesystem must to be execute xfs_growfs mountpoint
. The difference is looking what's command admin execute mkfs.ext4
or mkfs.xfs
. Attention:XFS must to use mountpoint or not to use /path/to/lvm
2、加磁盘扩大
fdisk /dev/disk
new
default
size
type
choose
82
print
write
pvcreate /path/to/new/create/lvm_disk
vgcreate <vg_name> /path/to/new/crate/lvm_disk
提示:其他一样。
四、Reduce Space
[root@server0 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vda 253:0 0 10G 0 disk
└─vda1 253:1 0 10G 0 part /
vdb 253:16 0 10G 0 disk
├─vdb1 253:17 0 512M 0 part
│ └─finance-loans 252:0 0 256M 0 lvm /finance/loans
└─vdb2 253:18 0 1G 0 part
└─vg-lvm 252:1 0 200M 0 lvm
Firest:unmount device
[root@server0 ~]# umount /dev/vg/lvm
Second:check a Linux ext2/ext3/ext4 file system
[root@server0 ~]# e2fsck -f /dev/vg/lvm
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/vg/lvm: 11/49400 files (9.1% non-contiguous), 11884/204800 blocks
Third:resize umount and e2fsck device
[root@server0 ~]# resize2fs /dev/vg/lvm 66M
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/vg/lvm to 67584 (1k) blocks.
The filesystem on /dev/vg/lvm is now 67584 blocks long.
提示:当需要进行 LVM 缩小操作时,所有操作必须相反。所以该步异常重要,下一步需要使 RHEL 重新识别被缩小的 LVM 卷。
Finished:reduce device
[root@server0 ~]# lvreduce -L 60M /dev/vg/lvm
WARNING: Reducing active logical volume to 60.00 MiB
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce lvm? [y/n]: y
Reducing logical volume lvm to 60.00 MiB
Logical volume lvm successfully resized
[root@server0 ~]# vgs vg
VG #PV #LV #SN Attr VSize VFree
vg 1 1 0 wz--n- 1020.00m 960.00m
[root@server0 ~]# lvs vg
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
lvm vg -wi-a----- 60.00m
Q:why the output tell me that "Rounding size to boundary between physical extents"
A:the lvm have the boundary and the defaults PE size was 4MB. You can change them with lvchange -s {1..4} <vgname>
and check it with vgdisplay <vgname>
.
五、Restore Destroyed LVM
Firest:Check LVM devices
[root@server0 ~]# vgcfgrestore -l vg
File: /etc/lvm/archive/vg_00033-587950815.vg
VG name: vg
Description: Created *before* executing 'vgscan'
Backup Time: Sun Nov 5 23:28:28 2017
File: /etc/lvm/archive/vg_00034-1362264111.vg
VG name: vg
Description: Created *before* executing 'vgscan'
Backup Time: Sun Nov 5 23:28:28 2017
File: /etc/lvm/backup/vg
VG name: vg
Description: Created *after* executing 'vgscan'
Backup Time: Sun Nov 5 23:28:28 2017
Second:Restore
vgcfgrestore -f <file_list_print> <vg>
Exameple: vgcfgrestore -f /etc/lvm/archive/vg_00034-1362264111.vg vg
Finished:unActive and Active
lvchange -an /dev/<vg>/<lvm>
lvchange -ay /dev/<vg>/<lvm>
Others
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
g create a new empty GPT partition table
G create an IRIX (SGI) partition table
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)