本篇博文的目标是:
Driver的ReceiverTracker接收到数据之后,下一步对数据是如何进行管理
一:ReceiverTracker的架构设计
1. Driver在Executor启动Receiver方式,每个Receiver都封装成一个Task,此时一个Job中就一个Task,而Task中就一条数据,也就是Receiver数据。由此,多少个Job也就可以启动多少个Receiver.
2. ReceiverTracker在启动Receiver的时候他有ReceiverSupervisor,其实现是ReceiverSupervisorImpl, ReceiverSupervisor本身启动的时候会启动Receiver,Receiver不断的接收数据,通过BlockGenerator将数据转换成Block。定时器会不断的把Block数据通过BlockManager或者WAL进行存储,数据存储之后ReceiverSupervisorImpl会把存储后的数据的元数据Metadate汇报给ReceiverTracker,其实是汇报给ReceiverTracker中的RPC实体ReceiverTrackerEndpoint.
ReceiverSupervisorImpl会将元数据汇报给ReceiverTracker,那么接收到之后,下一步就对数据进行管理。
通过receivedBlockHandler写数据
private val receivedBlockHandler: ReceivedBlockHandler = { if (WriteAheadLogUtils.enableReceiverLog(env.conf)) { if (checkpointDirOption.isEmpty) { throw new SparkException( "Cannot enable receiver write-ahead log without checkpoint directory set. " + "Please use streamingContext.checkpoint() to set the checkpoint directory. " + "See documentation for more details.") }//WAL new WriteAheadLogBasedBlockHandler(env.blockManager, receiver.streamId, receiver.storageLevel, env.conf, hadoopConf, checkpointDirOption.get) } else {//BlockManager new BlockManagerBasedBlockHandler(env.blockManager, receiver.storageLevel) } }
2. PushAndReportBlock存储Block数据,且把信息汇报给Driver。
/** Store block and report it to driver */def pushAndReportBlock( receivedBlock: ReceivedBlock, metadataOption: Option[Any], blockIdOption: Option[StreamBlockId] ) { val blockId = blockIdOption.getOrElse(nextBlockId) val time = System.currentTimeMillis val blockStoreResult = receivedBlockHandler.storeBlock(blockId, receivedBlock) logDebug(s"Pushed block $blockId in ${(System.currentTimeMillis - time)} ms") val numRecords = blockStoreResult.numRecords val blockInfo = ReceivedBlockInfo(streamId, numRecords, metadataOption, blockStoreResult) trackerEndpoint.askWithRetry[Boolean](AddBlock(blockInfo)) logDebug(s"Reported block $blockId") }
3. 此时trackerEndpoint是ReceiverTrackerEndpoint
/** Remote RpcEndpointRef for the ReceiverTracker */private val trackerEndpoint = RpcUtils.makeDriverRef("ReceiverTracker", env.conf, env.rpcEnv)
4. ReceivedBlockInfo:封装Block的存储信息。
/** Information about blocks received by the receiver */private[streaming] case class ReceivedBlockInfo( streamId: Int, //block属于哪个接收的流 numRecords: Option[Long],//多少条记录 metadataOption: Option[Any],//元数据信息 blockStoreResult: ReceivedBlockStoreResult ) { require(numRecords.isEmpty || numRecords.get >= 0, "numRecords must not be negative") @volatile private var _isBlockIdValid = true def blockId: StreamBlockId = blockStoreResult.blockId def walRecordHandleOption: Option[WriteAheadLogRecordHandle] = { blockStoreResult match { case walStoreResult: WriteAheadLogBasedStoreResult => Some(walStoreResult.walRecordHandle) case _ => None } } /** Is the block ID valid, that is, is the block present in the Spark executors. */ def isBlockIdValid(): Boolean = _isBlockIdValid /** * Set the block ID as invalid. This is useful when it is known that the block is not present * in the Spark executors. */ def setBlockIdInvalid(): Unit = { _isBlockIdValid = false } }
5. ReceivedBlockStoreResult:
/** Trait that represents the metadata related to storage of blocks */ private[streaming] trait ReceivedBlockStoreResult { // Any implementation of this trait will store a block id def blockId: StreamBlockId // Any implementation of this trait will have to return the number of records def numRecords: Option[Long] }
ReceiverTracker的源码源码遍历
1. 下面的消息是完成Receiver和ReceiverTracker之间通信的。
/** * Messages used by the NetworkReceiver and the ReceiverTracker to communicate * with each other. *///这里使用sealed意思是ReceiverTrackerMessage包含所有的消息。private[streaming] sealed trait ReceiverTrackerMessageprivate[streaming] case class RegisterReceiver( streamId: Int, typ: String, host: String, executorId: String, receiverEndpoint: RpcEndpointRef ) extends ReceiverTrackerMessageprivate[streaming] case class AddBlock(receivedBlockInfo: ReceivedBlockInfo) extends ReceiverTrackerMessageprivate[streaming] case class ReportError(streamId: Int, message: String, error: String)private[streaming] case class DeregisterReceiver(streamId: Int, msg: String, error: String) extends ReceiverTrackerMessage
2. Driver和ReceiverTrackerEndpoint之间的交流通过ReceiverTrackerLocalMessage。
/** * Messages used by the driver and ReceiverTrackerEndpoint to communicate locally. */private[streaming] sealed trait ReceiverTrackerLocalMessage1234512345
3. ReceiverTrackerLocalMessage中的子类
/** * This message will trigger ReceiverTrackerEndpoint to restart a Spark job for the receiver. *///从起Receiverprivate[streaming] case class RestartReceiver(receiver: Receiver[_]) extends ReceiverTrackerLocalMessage/** * This message is sent to ReceiverTrackerEndpoint when we start to launch Spark jobs for receivers * at the first time. *///启动Receiver的集合private[streaming] case class StartAllReceivers(receiver: Seq[Receiver[_]]) extends ReceiverTrackerLocalMessage/** * This message will trigger ReceiverTrackerEndpoint to send stop signals to all registered * receivers. *///程序结束的时候会发出停止所有Receiver的信息。private[streaming] case object StopAllReceivers extends ReceiverTrackerLocalMessage/** * A message used by ReceiverTracker to ask all receiver's ids still stored in * ReceiverTrackerEndpoint. *///正在存信息的是ReceiverTrackerEndpointprivate[streaming] case object AllReceiverIds extends ReceiverTrackerLocalMessage// UpdateReceiverRateLimit实例可能会有几个,因此在程序运行的时候需要限流。private[streaming] case class UpdateReceiverRateLimit(streamUID: Int, newRate: Long) extends ReceiverTrackerLocalMessage
4. ReceiverTracker:管理Receiver的启动,Receiver的执行,回收,执行过程中接收数据的管理。DStreamGraph中会有成员记录所有的数据流来源,免得每次都去检索。
/** * This class manages the execution of the receivers of ReceiverInputDStreams. Instance of * this class must be created after all input streams have been added and StreamingContext.start() * has been called because it needs the final set of input streams at the time of instantiation. * * @param skipReceiverLaunch Do not launch the receiver. This is useful for testing. */private[streaming]class ReceiverTracker(ssc: StreamingContext, skipReceiverLaunch: Boolean = false) extends Logging {//所有的InputStream都会交给graphprivate val receiverInputStreams = ssc.graph.getReceiverInputStreams()private val receiverInputStreamIds = receiverInputStreams.map { _.id }private val receivedBlockTracker = new ReceivedBlockTracker( ssc.sparkContext.conf, ssc.sparkContext.hadoopConfiguration, receiverInputStreamIds, ssc.scheduler.clock, ssc.isCheckpointPresent, Option(ssc.checkpointDir) )private val listenerBus = ssc.scheduler.listenerBus
ReceiverTracker中的receiverAndReply:
ReceiverTrackerEndpoint接收消息,并回复addBlock消息。
override def receiveAndReply(context: RpcCallContext): PartialFunction[Any, Unit] = { // Remote messages case RegisterReceiver(streamId, typ, host, executorId, receiverEndpoint) => val successful = registerReceiver(streamId, typ, host, executorId, receiverEndpoint, context.senderAddress) context.reply(successful) case AddBlock(receivedBlockInfo) => if (WriteAheadLogUtils.isBatchingEnabled(ssc.conf, isDriver = true)) { walBatchingThreadPool.execute(new Runnable { override def run(): Unit = Utils.tryLogNonFatalError { if (active) { context.reply(addBlock(receivedBlockInfo)) } else { throw new IllegalStateException("ReceiverTracker RpcEndpoint shut down.") } } }) } else { context.reply(addBlock(receivedBlockInfo)) } case DeregisterReceiver(streamId, message, error) => deregisterReceiver(streamId, message, error) context.reply(true) // Local messages //查看是否有活跃的Receiver case AllReceiverIds => context.reply(receiverTrackingInfos.filter(_._2.state != ReceiverState.INACTIVE).keys.toSeq) //停止所有Receivers case StopAllReceivers => assert(isTrackerStopping || isTrackerStopped) stopReceivers() context.reply(true) }
2. addBlock源码如下:
/** Add new blocks for the given stream */private def addBlock(receivedBlockInfo: ReceivedBlockInfo): Boolean = { receivedBlockTracker.addBlock(receivedBlockInfo) }
3. ReceiverBlockTracker的addBlock源码如下:把具体的一个Receiver汇报上来的数据的元数据信息写入streamIdToUnallocatedBlockQueues中。
/** Add received block. This event will get written to the write ahead log (if enabled). */def addBlock(receivedBlockInfo: ReceivedBlockInfo): Boolean = { try { val writeResult = writeToLog(BlockAdditionEvent(receivedBlockInfo)) if (writeResult) { synchronized { getReceivedBlockQueue(receivedBlockInfo.streamId) += receivedBlockInfo } logDebug(s"Stream ${receivedBlockInfo.streamId} received " + s"block ${receivedBlockInfo.blockStoreResult.blockId}") } else { logDebug(s"Failed to acknowledge stream ${receivedBlockInfo.streamId} receiving " + s"block ${receivedBlockInfo.blockStoreResult.blockId} in the Write Ahead Log.") } writeResult } catch { case NonFatal(e) => logError(s"Error adding block $receivedBlockInfo", e) false } }
其中getReceivedBlockQueue是ReceivedBlockQueue类型。
/** Get the queue of received blocks belonging to a particular stream */private def getReceivedBlockQueue(streamId: Int): ReceivedBlockQueue = { streamIdToUnallocatedBlockQueues.getOrElseUpdate(streamId, new ReceivedBlockQueue) }
4. 其中HashMap中第一个参数是StreamId,第二个参数ReceivedBlockQueue是StreamId对应接收到的Receiver.
private val streamIdToUnallocatedBlockQueues = new mutable.HashMap[Int, ReceivedBlockQueue]11
5. WritetToLog源码如下:
/** Write an update to the tracker to the write ahead log */private def writeToLog(record: ReceivedBlockTrackerLogEvent): Boolean = { if (isWriteAheadLogEnabled) { //先判断是否可以写入到log中。 logTrace(s"Writing record: $record") try {//write方法将数据写入 writeAheadLogOption.get.write(ByteBuffer.wrap(Utils.serialize(record)), clock.getTimeMillis()) true } catch { case NonFatal(e) => logWarning(s"Exception thrown while writing record: $record to the WriteAheadLog.", e) false } } else { true } }
ReceiverBlockTracker源码分析:
1. 保持跟踪所有接收到的Block。并且根据需要把他们分配给batches.
假设提供checkpoint的话,ReceiverBlockTracker中的信息包括receiver接收到的block数据和分配的信息。Driver如果失败的话,就读取checkpoint中的信息。
/** * Class that keep track of all the received blocks, and allocate them to batches * when required. All actions taken by this class can be saved to a write ahead log * (if a checkpoint directory has been provided), so that the state of the tracker * (received blocks and block-to-batch allocations) can be recovered after driver failure. * * Note that when any instance of this class is created with a checkpoint directory, * it will try reading events from logs in the directory. */ private[streaming] class ReceivedBlockTracker(
2. ReceivedBlockTracker通过调用allocateBlocksToBatch方法把接收到的数据分配给当前执行的Batch Duractions作业。
allocateBlocksToBatch被JobGenerator调用的。
/** * Allocate all unallocated blocks to the given batch. * This event will get written to the write ahead log (if enabled). */def allocateBlocksToBatch(batchTime: Time): Unit = synchronized { if (lastAllocatedBatchTime == null || batchTime > lastAllocatedBatchTime) { val streamIdToBlocks = streamIds.map { streamId => (streamId, getReceivedBlockQueue(streamId).dequeueAll(x => true)) }.toMap val allocatedBlocks = AllocatedBlocks(streamIdToBlocks) if (writeToLog(BatchAllocationEvent(batchTime, allocatedBlocks))) {// allocatedBlocks是接收到数据// batchTime 是时间 timeToAllocatedBlocks.put(batchTime, allocatedBlocks)//每次分配的时候都会更新时间 lastAllocatedBatchTime = batchTime } else { logInfo(s"Possibly processed batch $batchTime need to be processed again in WAL recovery") } } else { // This situation occurs when: // 1. WAL is ended with BatchAllocationEvent, but without BatchCleanupEvent, // possibly processed batch job or half-processed batch job need to be processed again, // so the batchTime will be equal to lastAllocatedBatchTime. // 2. Slow checkpointing makes recovered batch time older than WAL recovered // lastAllocatedBatchTime. // This situation will only occurs in recovery time. logInfo(s"Possibly processed batch $batchTime need to be processed again in WAL recovery") } }
JobGenerator中的generateJob
/** Generate jobs and perform checkpoint for the given `time`. */private def generateJobs(time: Time) { // Set the SparkEnv in this thread, so that job generation code can access the environment // Example: BlockRDDs are created in this thread, and it needs to access BlockManager // Update: This is probably redundant after threadlocal stuff in SparkEnv has been removed. SparkEnv.set(ssc.env) Try {// jobScheduler.receiverTracker.allocateBlocksToBatch(time) // allocate received blocks to batch
3. AllocatedBlocks源码如下:
/** Class representing the blocks of all the streams allocated to a batch */private[streaming]case class AllocatedBlocks(streamIdToAllocatedBlocks: Map[Int, Seq[ReceivedBlockInfo]]) { def getBlocksOfStream(streamId: Int): Seq[ReceivedBlockInfo] = { streamIdToAllocatedBlocks.getOrElse(streamId, Seq.empty) } }
ReceiverTracker的receive方法架构如下:
4. ReceiverTracker中receive源码如下:
override def receive: PartialFunction[Any, Unit] = { // Local messages//启动所有的receivers,在ReceiverTracker刚启动的时候会给自己发消息,通过//schedulingPolicy来触发消息。 case StartAllReceivers(receivers) => val scheduledLocations = schedulingPolicy.scheduleReceivers(receivers, getExecutors) for (receiver <- receivers) { val executors = scheduledLocations(receiver.streamId) updateReceiverScheduledExecutors(receiver.streamId, executors) receiverPreferredLocations(receiver.streamId) = receiver.preferredLocation startReceiver(receiver, executors) }//当Executor帮我们分配Receiver或者Receiver失效,然后给自己发消息触发Receiver重新分发。 case RestartReceiver(receiver) => // Old scheduled executors minus the ones that are not active any more val oldScheduledExecutors = getStoredScheduledExecutors(receiver.streamId) val scheduledLocations = if (oldScheduledExecutors.nonEmpty) { // Try global scheduling again oldScheduledExecutors } else { val oldReceiverInfo = receiverTrackingInfos(receiver.streamId) // Clear "scheduledLocations" to indicate we are going to do local scheduling val newReceiverInfo = oldReceiverInfo.copy( state = ReceiverState.INACTIVE, scheduledLocations = None) receiverTrackingInfos(receiver.streamId) = newReceiverInfo schedulingPolicy.rescheduleReceiver( receiver.streamId, receiver.preferredLocation, receiverTrackingInfos, getExecutors) } // Assume there is one receiver restarting at one time, so we don't need to update // receiverTrackingInfos startReceiver(receiver, scheduledLocations)//当我们快要完成数据计算的时候,会发送此消息,将所有的Receiver交给我们 case c: CleanupOldBlocks => receiverTrackingInfos.values.flatMap(_.endpoint).foreach(_.send(c))// ReceiverTracker可以动态的调整Receiver接收的RateLimit case UpdateReceiverRateLimit(streamUID, newRate) => for (info <- receiverTrackingInfos.get(streamUID); eP <- info.endpoint) { eP.send(UpdateRateLimit(newRate)) } // Remote messages// case ReportError(streamId, message, error) => reportError(streamId, message, error) }
5. 在ReceiverSupervisorImpl的receive方法中就接收到了ReceiverTracker的CleanupOldBlocks消息。
/** RpcEndpointRef for receiving messages from the ReceiverTracker in the driver */private val endpoint = env.rpcEnv.setupEndpoint( "Receiver-" + streamId + "-" + System.currentTimeMillis(), new ThreadSafeRpcEndpoint { override val rpcEnv: RpcEnv = env.rpcEnv override def receive: PartialFunction[Any, Unit] = { case StopReceiver => logInfo("Received stop signal") ReceiverSupervisorImpl.this.stop("Stopped by driver", None) case CleanupOldBlocks(threshTime) => logDebug("Received delete old batch signal")//根据时间就clean Old Block cleanupOldBlocks(threshTime)// case UpdateRateLimit(eps) => logInfo(s"Received a new rate limit: $eps.") registeredBlockGenerators.foreach { bg => bg.updateRate(eps) } } })
6. RateLimiter中的updateRate源码如下:
/** * Set the rate limit to `newRate`. The new rate will not exceed the maximum rate configured by * {`spark`.`streaming`.`receiver`.`maxRate`}, even if `newRate` is higher than that. * * @param newRate A new rate in events per second. It has no effect if it's 0 or negative. */ private[receiver] def updateRate(newRate: Long): Unit = if (newRate > 0) { if (maxRateLimit > 0) { rateLimiter.setRate(newRate.min(maxRateLimit)) } else { rateLimiter.setRate(newRate) } } }
7. 其中setRate源码如下:
/** * Updates the stable rate of this {@code RateLimiter}, that is, the * {@code permitsPerSecond} argument provided in the factory method that * constructed the {@code RateLimiter}. Currently throttled threads will <b>not</b> * be awakened as a result of this invocation, thus they do not observe the new rate; * only subsequent requests will. * * <p>Note though that, since each request repays (by waiting, if necessary) the cost * of the <i>previous</i> request, this means that the very next request * after an invocation to {@code setRate} will not be affected by the new rate; * it will pay the cost of the previous request, which is in terms of the previous rate. * * <p>The behavior of the {@code RateLimiter} is not modified in any other way, * e.g. if the {@code RateLimiter} was configured with a warmup period of 20 seconds, * it still has a warmup period of 20 seconds after this method invocation. * * @param permitsPerSecond the new stable rate of this {@code RateLimiter}. */ public final void setRate(double permitsPerSecond) { Preconditions.checkArgument(permitsPerSecond > 0.0 && !Double.isNaN(permitsPerSecond), "rate must be positive"); synchronized (mutex) { resync(readSafeMicros()); double stableIntervalMicros = TimeUnit.SECONDS.toMicros(1L) / permitsPerSecond; this.stableIntervalMicros = stableIntervalMicros; doSetRate(permitsPerSecond, stableIntervalMicros); } }
ReceiverTracker中receiveAndReply中StopAllReceivers流程如下:
1. stopReceivers源码如下:
/** Send stop signal to the receivers. */ private def stopReceivers() { receiverTrackingInfos.values.flatMap(_.endpoint).foreach //给ReceiverSupervisorImpl发送消息。{ _.send(StopReceiver) } logInfo("Sent stop signal to all " + receiverTrackingInfos.size + " receivers") } }
2. 在ReceiverSupervisorImpl中receive接收到了此消息。
/** RpcEndpointRef for receiving messages from the ReceiverTracker in the driver */private val endpoint = env.rpcEnv.setupEndpoint( "Receiver-" + streamId + "-" + System.currentTimeMillis(), new ThreadSafeRpcEndpoint { override val rpcEnv: RpcEnv = env.rpcEnv override def receive: PartialFunction[Any, Unit] = { case StopReceiver => logInfo("Received stop signal") ReceiverSupervisorImpl.this.stop("Stopped by driver", None) case CleanupOldBlocks(threshTime) => logDebug("Received delete old batch signal") cleanupOldBlocks(threshTime) case UpdateRateLimit(eps) => logInfo(s"Received a new rate limit: $eps.") registeredBlockGenerators.foreach { bg => bg.updateRate(eps) } } })
3. stop函数在ReceiverSupervisor中实现的。
/** Mark the supervisor and the receiver for stopping */def stop(message: String, error: Option[Throwable]) { stoppingError = error.orNull stopReceiver(message, error) onStop(message, error) futureExecutionContext.shutdownNow() stopLatch.countDown() }
4. stopReceiver源码如下:
/** Stop receiver */def stopReceiver(message: String, error: Option[Throwable]): Unit = synchronized { try { logInfo("Stopping receiver with message: " + message + ": " + error.getOrElse("")) receiverState match { case Initialized => logWarning("Skip stopping receiver because it has not yet stared") case Started => receiverState = Stopped receiver.onStop() logInfo("Called receiver onStop") onReceiverStop(message, error) case Stopped => logWarning("Receiver has been stopped") } } catch { case NonFatal(t) => logError("Error stopping receiver " + streamId + t.getStackTraceString) } }
5. 最终调用onStop方法
/** * This method is called by the system when the receiver is stopped. All resources * (threads, buffers, etc.) setup in `onStart()` must be cleaned up in this method. */def onStop()
6. onReceiverStop方法在子类ReceiverSupervisorImpl中会有具体实现。
override protected def onReceiverStop(message: String, error: Option[Throwable]) { logInfo("Deregistering receiver " + streamId) val errorString = error.map(Throwables.getStackTraceAsString).getOrElse("") //告诉Driver端也就是ReceiverTracker调用DeregisterReceiver trackerEndpoint.askWithRetry[Boolean](DeregisterReceiver(streamId, message, errorString)) logInfo("Stopped receiver " + streamId) }
7. onStop方法在ReceiverSupervisorImpl中实现如下:
override protected def onStop(message: String, error: Option[Throwable]) { registeredBlockGenerators.foreach { _.stop() }//停止消息循环 env.rpcEnv.stop(endpoint) }
StopAllReceivers全流程如下:
总结:
Receiver接收到数据之后合并存储数据后,ReceiverSupervisorImpl会把数据汇报给ReceiverTracker, ReceiverTracker接收到元数据,其内部汇报的是RPC通信体,接收到数据之后,内部有ReceivedBlockTracker会管理数据的分配,JobGenerator会将每个Batch,每次工作的时候会根据元数据信息从ReceiverTracker中获取相应的元数据信息生成RDD。
ReceiverBlockTracker中 allocateBlocksToBatch专门管理Block元数据信息,作为一个内部的管理对象。
门面设计模式:
ReceiverTracker和ReceivedBlockTracker的关系是:具体干活的是ReceivedBlockTracker,但是外部代表是ReceiverTracker。
private type ReceivedBlockQueue = mutable.Queue[ReceivedBlockInfo]//为每个Receiver单独维护一个Queue// streamIdToUnallocatedBlockQueues里面封装的是所有汇报上来的数据,但是没有被分配的数据。private val streamIdToUnallocatedBlockQueues = new mutable.HashMap[Int, ReceivedBlockQueue]//维护的是已经分配到Batch的元数据信息。private val timeToAllocatedBlocks = new mutable.HashMap[Time, AllocatedBlocks]private val writeAheadLogOption = createWriteAheadLog()private var lastAllocatedBatchTime: Time = null12345678910111234567891011
JobGenerator在计算基于Batch的Job的时候,我们的DStreamGraph生成RDD的DAG的时候会调用此方法。
/** Get the blocks allocated to the given batch. *///此方法就会生成RDD。def getBlocksOfBatch(batchTime: Time): Map[Int, Seq[ReceivedBlockInfo]] = synchronized { timeToAllocatedBlocks.get(batchTime).map { _.streamIdToAllocatedBlocks }.getOrElse(Map.empty) }
当一个Batch计算完的时候,他会把已经使用的数据块的数据信息清理掉。
/** * Clean up block information of old batches. If waitForCompletion is true, this method * returns only after the files are cleaned up. */def cleanupOldBatches(cleanupThreshTime: Time, waitForCompletion: Boolean): Unit = synchronized { require(cleanupThreshTime.milliseconds < clock.getTimeMillis()) val timesToCleanup = timeToAllocatedBlocks.keys.filter { _ < cleanupThreshTime }.toSeq logInfo("Deleting batches " + timesToCleanup) if (writeToLog(BatchCleanupEvent(timesToCleanup))) { timeToAllocatedBlocks --= timesToCleanup writeAheadLogOption.foreach(_.clean(cleanupThreshTime.milliseconds, waitForCompletion)) } else { logWarning("Failed to acknowledge batch clean up in the Write Ahead Log.") } }
备注:
1、DT大数据梦工厂微信公众号DT_Spark
2、IMF晚8点大数据实战YY直播频道号:68917580
3、新浪微博: http://www.weibo.com/ilovepains
本文转自http://blog.csdn.net/snail_gesture/article/details/51487299
转载于:https://blog.51cto.com/love205088/1784659