cisco881连计算机配置,Cisco与Juniper 聚合端口配置

该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

Cisco端配置

SW1-CE4#show run int f0/47

Building configuration...

Current configuration : 147 bytes

!

interface FastEthernet0/47

switchport trunk encapsulation dot1q

switchport mode trunk

channel-protocol lacp

channel-group 1 mode active

end

SW1-CE4#show run int f0/48

Building configuration...

Current configuration : 147 bytes

!

interface FastEthernet0/48

switchport trunk encapsulation dot1q

switchport mode trunk

channel-protocol lacp

channel-group 1 mode active

end

SW1-CE4#show run int port-channel 1

Building configuration...

Current configuration : 92 bytes

!

interface Port-channel1

switchport trunk encapsulation dot1q

switchport mode trunk

end

验证：

SW1-CE4#show lacp neighbor

Flags: S - Device is requesting Slow LACPDUs

F - Device is requesting Fast LACPDUs

A - Device is in Active mode P - Device is in Passive mode

Channel group 1 neighbors

Partner's information:

LACP port Admin Oper Port Port

Port Flags Priority Dev ID Age key Key Number State

Fa0/47 FP 127 0026.881f.3840 5s 0x0 0x1 0x1 0x3E

Fa0/48 FP 127 0026.881f.3840 5s 0x0 0x1 0x2 0x3E

root@PE1# run show lacp interfaces

Aggregated interface: ae0

LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity

fe-0/0/6 Actor No No Yes Yes Yes Yes Fast Passive

fe-0/0/6 Partner No No Yes Yes Yes Yes Slow Active

fe-0/0/7 Actor No No Yes Yes Yes Yes Fast Passive

fe-0/0/7 Partner No No Yes Yes Yes Yes Slow Active

LACP protocol: Receive State Transmit State Mux State

fe-0/0/6 Current Slow periodic Collecting distributing

fe-0/0/7 Current Slow periodic Collecting distributing